Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim M - February 2, 2023
Verified Purchase
Fit as expected
Great part
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
February 13, 2018
How difficult is this for an amateur to fix
For model number 11092282100
Hi Pat, Thank you for the question. I am not able to tell you how hard it would be sorry as it depends on your level of repair knowledge. PartSelect only has information on installing the parts sorry. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
March 19, 2019
Dial moves through cycles but machine doesn't stay on unless you wedge something behind dial. Timer ?
For model number 11092281800
Hello Gene, thank you for your question. We would recommend inspecting the timer knob and time knob dial first as the knob when you pull out should remain pulled out so the washer can continue its cycles. If the timer knobs are no broken or worn the timer should be replaced Part Number: PS11743424. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ralph
July 23, 2019
Washer stops in the rinse cycle does not proceed to spin in normal cycle. However if i start the wash on the permanent press cycle it works fine. I think it is the cycle selector control. Is that the same part as what you have listed as the timer for 171.00?
For model number 11092577200
Hello Ralph, thank you for your question. Yes, the timer control (cycle selector) is PartSelect Number: PS11743424. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kelley
January 31, 2020
How does the timer knob remove dont want to keep pulling and break it
For model number 11092274100
Hi kelley. Please watch our video here: https://www.youtube.com/watch?v=CP8-iaA-IeE . Thank you for your question and good luck with your repair.
Was this helpful?
Thank you for voting!
Joe
December 14, 2019
Machine wash cycle fine when timer advances to spin cycle after wash or rinse cycle will not start pump or ssd's pin cycle
Is it the timer
For model number 11092281100
Hello Joe,
Thank you for your question. If the cycle will not advance after the spin cycle, it is likely to be a faulty timer that is causing it and would need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Tom
April 23, 2019
Machine fills, drains and spins, but will not agitate. After machine fills, it sits quietly (no motor noise) until timer advances to the point were it will start to drain and the basket begins to spin. Rinse cycle and spin also works. Could this be caused by bad timer contacts?
For model number 110.92281100
Hi Tom,
Thank you for your question. There are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the direct drive motor coupling, the thrust spacer, the agitator bolt and the clutch assembly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.