When this part is used along with the lid switch, it can tell the motor of the washer to stop when a load is uneven. The washer will not start up until the lid is opened and then closed again.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, International.
Part# WP216255 replaces these:
AP6005887, 2-16255, 216255, 216255R
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jonathan
December 15, 2023
There is ample hot water filling the tun, but cold water trickles in very slowly. lt takes over an hour to fill the tub when using hot water only. It's been doing this for years. Can you please suggest a likely replacement part, or other cause? Thank you
For model number LAT8405AAE
Hello Jonathan, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the cold water line for any clogging or obstruction. If this is not the issue, we would recommend replacing the water inlet valve, part number PS11739275, to solve the problem. It controls the water flow into the washer. We hope this helps!