SKG9611W540R Hardwick Range - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the SKG9611W540R
leak
removed then installed new unit by hand. received order the next day-am. delivery time great.
Parts Used:
George from Plainville, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
12 of 14 people
found this instruction helpful.
Thank you for voting!
Purchased home but stove had no broiler pan.
Purchased 2 piece broiler pan from this site
Parts Used:
Raymond from BLOOMINGTON, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
14 of 20 people
found this instruction helpful.
Thank you for voting!
spring broke on one side of door hinge
Pulled the stove out, removed the sides and attatched the new springs( replaced both while the stove was out). Worked like new and put the stove back.
Parts Used:
Travis from Lexington, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
13 of 18 people
found this instruction helpful.
Thank you for voting!
Light Switch Was Broken
I removed screws that hold cover and put cover aside. I removed the buttons and removed glass cover. I pulled panel out far enough t get tswitch wires and installed switch. Be very careful not to let wires touch metal.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
12 of 17 people
found this instruction helpful.
Thank you for voting!
the burner knobs broke off
I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 17 people
found this instruction helpful.
Thank you for voting!
Door Spring Broke
Removed 7 screws on sides and one on top of stove. Replaced both springs (only one was broken but did both). Took around 15 to 30 minutes from start to finish.Fastest shipping in history during holidays without paying anything extra.
Parts Used:
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 9 people
found this instruction helpful.
Thank you for voting!
30 year old gas stove needed a new burner assembly.
We lifted up the stove top, slipped the burner assembly in. It fit! who knew that we could get a part to an old stove without the model number, just by looking at a picture of the part! Terrific!
Parts Used:
Caroline from South Windsor, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 7 people
found this instruction helpful.
Thank you for voting!
The old light switch was broken
The replacement switch was slightly larger than the old one so it would not go through the hole in the front panel so I had to get a reaming tool and enlarge the hole just a little for the switch to go through. It was still an easy repair as I had the proper tool.
Parts Used:
James from Charleston, AL
Total Repair Time:
15 - 30 mins
6 of 8 people
found this instruction helpful.
Thank you for voting!
Gas manifold had holes in it.
Removed locking wire from bottom burner assembly then I pulled the element out and replaced with the new one.
Parts Used:
Mr. J.C. from Haines City, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 people
found this instruction helpful.
Thank you for voting!
A high flame was coming out of the side of the burner
Easy......pulled out the old one easily and popped in the new one.......saved a lot of money...no repair bill for either diagnostic fee or assembly fee ...No mark up for the part either. Very happy mom!
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 people
found this instruction helpful.
Thank you for voting!
light bulb in water ice freezer door went bad
I didn't. Don't know how to get to light bulb to change it for this specific model
Parts Used:
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
7 of 13 people
found this instruction helpful.
Thank you for voting!
Replacing the bulb in the freezer side
Removed the ice brucket, Removed the light shield by releasing one screw using a nutdriver. Replacing the bulb and reinstalled the light shield. Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Parts Used:
Yafa (and David) from Bothell, WA
Total Repair Time:
Less than 15 mins
5 of 10 people
found this instruction helpful.
Thank you for voting!
Freont Burners Of Both Units Had Rusted Though Over The Years Of Boilover.
Lifted lid, removed old burner units, replace with new ones. In less than two min. Was back up and cooking.
Parts Used:
Angelo W. from Chirfland, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 people
found this instruction helpful.
Thank you for voting!
Broken burner knobs on stove.
Just replaced the old burner knobs with the new !!!
Parts Used:
Barbara L. from Tewksbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 people
found this instruction helpful.
Thank you for voting!
Install valve knobs
This was not a difficult task. I just slid the valve knob on the shaft, repair was complete. This was a very easy diy project.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 6 people
found this instruction helpful.
Thank you for voting!
All Instructions for the SKG9611W540R