Models > DDE8200PBC

DDE8200PBC General Electric Dryer - Overview

Sections of the DDE8200PBC

[Viewing 1 of 1]
Diagram and Parts List for General Electric Dryer
Keep searches simple, eg. "belt" or "pump".
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$11.40
  In Stock
Order within the next 11 hrs and your part ships today!
High Limit Thermostat – Part Number: WE4X584
High Limit Thermostat
★★★★★
★★★★★
(4)
PartSelect #: PS268083
Manufacturer #: WE4X584
With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w...
$32.15
  In Stock
Order within the next 11 hrs and your part ships today!
Drive Motor – Part Number: WE17X10010
Drive Motor
PartSelect #: PS1559768
Manufacturer #: WE17X10010
Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.
$349.53
  In Stock
Order within the next 11 hrs and your part ships today!
Door Switch – Part Number: WE4X197
Door Switch
PartSelect #: PS268004
Manufacturer #: WE4X197
This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.
  No Longer Available
Heat Detector – Part Number: WE4X448
Heat Detector
★★★★★
★★★★★
(1)
PartSelect #: PS268031
Manufacturer #: WE4X448
Also known as Flame Sensor/Detector.
$78.46
  In Stock
Order within the next 11 hrs and your part ships today!
Timer Knob – Part Number: WE1X1266
Timer Knob
PartSelect #: PS266957
Manufacturer #: WE1X1266
This knob accepts a D-shaped shaft.
  No Longer Available
Terminal Block - 220 Volts – Part Number: WE4X168
Terminal Block - 220 Volts
★★★★★
★★★★★
(1)
PartSelect #: PS268001
Manufacturer #: WE4X168
  No Longer Available
Multi Rib Belt - 4 Ridges – Part Number: WE12X49P
Multi Rib Belt - 4 Ridges
★★★★★
★★★★★
(1)
PartSelect #: PS265703
Manufacturer #: WE12X49P
This dryer drum belt goes around the dryer drum and the pulleys to rotate the drum once motor is activate.
  No Longer Available
Heater Coil Restring Kit - carries 250 volts – Part Number: WE11X261
Heater Coil Restring Kit - carries 250 volts
PartSelect #: PS265622
Manufacturer #: WE11X261
This heating element coil restring kit is intended for use with many of GE's brands of electric clothes dryers. It carries 250 volts, and includes two coils.
  No Longer Available
BLOWER WHEEL – Part Number: WE16X16
BLOWER WHEEL
PartSelect #: PS266142
Manufacturer #: WE16X16
$97.76
  In Stock
Order within the next 11 hrs and your part ships today!
SLIDE Assembly – Part Number: WE13X93
SLIDE Assembly
PartSelect #: PS265897
Manufacturer #: WE13X93
$41.27
  Special Order
SW BUTTON – Part Number: WH1X2257
SW BUTTON
PartSelect #: PS270859
Manufacturer #: WH1X2257
  No Longer Available
View More
Back to Top

Questions And Answers for DDE8200PBC

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the DDE8200PBC

[Viewing 3 of 3]
Door won’t close
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replqce bad switch
pried old switch assembly from front of machine with screw driver. removed 2 electrical connections. shorted terminals to verify problem. inserted wiring terminals to new switch. verified operation and then pushed switch assembly into machine opening.
Parts Used:
Door Switch
  • Robert from Virginia Beach, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
30 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to change the door opening position
I removed the door and "flipped" it to open right to left. Rather than remove the existing door latch I added the purchased latch on the right side to enable opening the door right to left or left to right.
Parts Used:
Door Latch
  • Robyn from Laguna Niguel, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
23 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door latch was broken
Pulled out the remnants of the old latch out with the pliers and then popped the new one in...less than 2 minutes. Oh, and the part was delivered in less than 2 days. Great job, Partselect !
Parts Used:
Door Latch
  • Kate from MULLINS, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top