Models > CAH8

CAH8 Crosley Air Conditioner - Overview

Models starting with CAH8

Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: W10491985
Screw
★★★★★
★★★★★
(4)
PartSelect #: PS3651485
Manufacturer #: W10491985
Sold individually.
$8.06
  In Stock
Control Knob – Part Number: WP8031121
Control Knob
★★★★★
★★★★★
(4)
PartSelect #: PS11744805
Manufacturer #: WP8031121
This control knob may also be known as the selector knob or the room air conditioner rotary switch knob, and is compatible with your room air conditioner. The part will allow you to shift the rotary s...
$48.47
  In Stock
Screw, 8-18 x 1/2 – Part Number: WP3390631
Screw, 8-18 x 1/2
PartSelect #: PS11741443
Manufacturer #: WP3390631
This screw is sold individually.
$7.85
  In Stock
Hex Nut – Part Number: WP488130
Hex Nut
★★★★★
★★★★★
(2)
PartSelect #: PS11742711
Manufacturer #: WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air cond...
$9.58
  In Stock
Control Knob – Part Number: WP1158054
Control Knob
★★★★★
★★★★★
(2)
PartSelect #: PS11738317
Manufacturer #: WP1158054
This air conditioner control knob is gray in color, and measures approximately 1 inch in diameter. This replacement part allows you to properly control all the air conditioner settings. If your knob h...
  No Longer Available
Single Hex Head Screw – Part Number: WP489069
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$5.43
  In Stock
Motor Clip – Part Number: WPY015825
Motor Clip
★★★★★
★★★★★
(2)
PartSelect #: PS11757442
Manufacturer #: WPY015825
This motor clip is an original manufacturer replacement clip used to secure the motor in your home appliances. It holds the motor firmly to its housing to prevent shaking and potential damage while th...
$21.66
  In Stock
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$9.15
  Special Order
Air Filter - Cut-to-Fit – Part Number: WP876775
Air Filter - Cut-to-Fit
PartSelect #: PS11746805
Manufacturer #: WP876775
This black air filter is twenty-four inches long.
  No Longer Available
Screw – Part Number: WP3196557
Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.77
  In Stock
Silicone Rubber Adhesive - 2 oz – Part Number: WP279368
Silicone Rubber Adhesive - 2 oz
PartSelect #: PS11740605
Manufacturer #: WP279368
Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone...
$52.06
  In Stock
SCREW – Part Number: W10856125
SCREW
PartSelect #: PS11731323
Manufacturer #: W10856125
Sold individually.
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A/C cooling but not cycling.
Unpluged unit from receptacle. Simply slid the unit forward a bit (to get to screws after removing face), removed four screws, pulled the wired sensor from front of grill. Reversed & replaced everything, plugged unit back in and turned on - all working well. Easy job.
Parts Used:
Thermostat
  • Dr H L from KIMBERLING CY, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the old thermostat would not on an off
Removed old thermostat replaced it with a new thermostat.
Parts Used:
Thermostat
  • Donald W from GRANITE SHLS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both motor clips broken - >40 year old dryer!!
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Parts Used:
Motor Clip
  • susan from Socorro, NM
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!