Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
Parts That Fix Kenmore Dishwasher 66513543N412 Not draining
Not draining is a commonly reported symptom for the 66513543N412 Kenmore Dishwasher, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your 66513543N412 Kenmore Dishwasher that will fix Not draining. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the body is cracked, causing leakage. To prevent this from happening, replace the drain pump. The tools needed for this installation are: Phillips screwdriver, 5/16 inch nut driver, 5/8 inch wrench, and a flathead screwdriver. Remember to unplug your dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.
Replacing your Whirlpool Dishwasher Dishwasher Drain Pump
![Replacing your Dishwasher Drain Pump Replacing your Dishwasher Drain Pump](https://img.youtube.com/vi/LRTH3Wq_Apw/maxresdefault.jpg)
Customer Repair Stories
Water not draining from the dishwasher
-
Frederick from BIG PRAIRIE, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
dishwasher not draining after wash cycle
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
-
Andrew from Alexandria, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
This drain hose is 6 and 1/2 feet.
Replacing your KitchenAid Dishwasher Drain Hose
![Replacing your Drain Hose Replacing your Drain Hose](https://img.youtube.com/vi/ClVbh9jXOlU/maxresdefault.jpg)
Customer Repair Stories
Drain hose leaking
-
Robert from Beaufort, SC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
Unwanted water.
-
David from PITTSBURGH, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
This part is used to drain water from your dishwasher.
Replacing your Whirlpool Dishwasher Drain Hose
![Replacing your Drain Hose Replacing your Drain Hose](https://img.youtube.com/vi/U5UojswX6HI/maxresdefault.jpg)
Measures level of soil in the water.
Replacing your KitchenAid Dishwasher Turbidity Sensor
![Replacing your Turbidity Sensor Replacing your Turbidity Sensor](https://img.youtube.com/vi/qx2juCetVhI/maxresdefault.jpg)
Customer Repair Stories
Failed diagonistics test for OWI sensor
-
Mark from Lancaster, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will need to be replaced. A good indication of a damaged filter is if your dishwasher is not draining or cleaning the dishes properly. This filter has a gray plastic top and bottom that are approximately 5 inches in diameter. This is a genuine OEM part that comes directly from the manufacturer. To replace the filter, simply turn it counterclockwise to unlock, and then screw in the new filter
Replacing your Whirlpool Dishwasher Dishwasher Filter
![Replacing your Dishwasher Filter Replacing your Dishwasher Filter](https://img.youtube.com/vi/rb6amLby04k/maxresdefault.jpg)
Customer Repair Stories
New filter
-
John from SAINT CHARLES, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Dishwasher would not drain
-
Edward F from CINCINNATI, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
This is a screen filter, designed to keep food particles, gunk, and debris from entering the pump of your dishwasher. If this filter is missing, damaged, or simply unusable, it will need to be replaced so you can effectively clean your dishes. Replacing this filter is simple, as you only need to twist and remove the lower filter, before you can carefully lift this filter out. This filter is an OEM part and is sold individually.
Replacing your Whirlpool Dishwasher Screen
![Replacing your Screen Replacing your Screen](https://img.youtube.com/vi/pzXZ9jGjIoE/maxresdefault.jpg)
Customer Repair Stories
The old filter was warped, allowing food into the sprayer system
-
George from LYMAN, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins