MTD Vacuum Parts
Popular MTD Vacuum Parts
MTD Vacuum Primer and Hose Assembly
PartSelect Number PS10014772
Manufacturer Part Number 791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages.
If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor.
This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
Fixes these symptoms
- Will Not Start
- See more...
MTD Vacuum Fuel Line and Filter
PartSelect Number PS10014709
Manufacturer Part Number 791-682039
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear.
The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Howard from NEWBURGH, IN
MTD Vacuum Impeller Assembly
PartSelect Number PS16429077
Manufacturer Part Number 753-08491
This is an impeller assembly kit designed for use with various models of leaf blower and comes with all the hardware necessary to replace it, including the impeller, the securing nut and 1 washer for each side of the impeller. If you notice the blowing power of the leaf blower is reduced or that there is any physical damage to the impeller like bent or cracked blades, the impeller needs to be replaced immediately. When replacing the impeller, you will need a screwdriver or wrench to remove the impeller cover, and you should ensure you use proper safety equipment like gloves.
MTD Vacuum Fuel Return Line
PartSelect Number PS9137685
Manufacturer Part Number 791-181086
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor.
This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks.
Most customers rated this repair as easy.
Installation Instructions
Howard from NEWBURGH, IN
MTD Vacuum Carburetor
PartSelect Number PS9119300
Manufacturer Part Number 753-06190
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes into the engine, over time components may wear out eventually requiring a replacement to ensure peak performance. It is a high-quality metal body carburetor with included rubber primer bulb, please note this assembly is sold individually. When replacing a carburetor it is advised to replace the gaskets as well to ensure the proper seal, keep in mind gaskets are sold separately.
Fixes these symptoms
- Engine stops after a few seconds or minutes
- Will Not Start
- See more...
Installation Instructions
john from SHARPSVILLE, PA
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines onto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read more...
MTD Vacuum Air Cleaner Filter
PartSelect Number PS10013535
Manufacturer Part Number 791-180350B
The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.
MTD Vacuum Bag Assembly, Oval Inlet
PartSelect Number PS10009211
Manufacturer Part Number 753-04465
This replacement vacuum bag collects and stores debris in your handheld blower. It is made from fabric and has an oval inlet and a fastening mechanism. A broken vacuum bag will leak or have visible tears, holes, or frayed edges. If it becomes clogged, you may notice reduced suction from your blower. It is strongly recommended to replace a broken vacuum bag assembly promptly, as debris can escape during blower operation. To remove the bag, locate its attachment point. You need to depress the two tabs at the oval end of the bag to release it from your machine. Please be aware that this authentic OEM vacuum bag is sold individually.
MTD Vacuum Lawn Mower Ground Drive Belt
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work gloves to protect your hands when installing this part.
MTD Vacuum Fuel Pick-Up Line with Filter
PartSelect Number PS10014339
Manufacturer Part Number 791-182353
The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.
MTD Vacuum Appliance Types
Popular MTD Vacuum Models
Below are the most popular MTD Vacuum models we have. Enter your model number in the search box to find your model.
- 1150 Blower
- 1150 Blower
- RGBV3100 Blower
- RGBV3100 Blower
- 320BVR Leaf Blower 41BS320G734
- 41ABESPG706 Electric Blower
- YM2BV MTD Leaf Blower Model YM2BV Parts
- H25B Blower
- 692 Leaf Blower
- BL125 MTD Leaf Blower Model BL125 Parts
- BB45 Pro Blower
- M7900 MTD Leaf Blower Model M7900 Parts
- 35115 Grass Catcher Attachment
- 19A70043799 Grass Catcher Attachment
- 190-064-000 Grass Catcher Attachment
- 41BBESVG034 MTD Leaf Blower Model 41BBESVG034 Parts
- 3Z479 MTD Leaf Blower Model 3Z479/1987 Parts
- 247-692-122 MTD Leaf Blower Model 247-692-122 (247692122, 247 692 122) Parts
- 41AJBV-C954 MTD Leaf Blower Model 41AJBV-C954 (41AJBVC954, 41AJBV C954) Parts
- 290R41AR290G734 Blower