Toro/Toro_Thumb/13AT61RH048_(1L137H10100)_WW_11.gif.gif
See part K-1026A in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Aluminum Push Rod

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS9073139
Manufacturer Part Number 690982
Manufactured by Briggs and Stratton
Product Description

Aluminum Push Rod Specifications

This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and will need to be replaced before your engine runs at full capacity. This push rod is approximately 6 inches in length, and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Engine, Lawn Tractor, Lawn Mower.
This part works with the following products:
Briggs and Stratton, Toro, MTD, Poulan.
Part# 690982 replaces these:
690982
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Merl
    September 16, 2017
    Is the aluminum push rod for the intake or the exhaust valve?
    For model number 445777-0231-E1
    Hi Merl, Thank you for your question. This part is for the exhaust valve. Good luck with your repair.

    14 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Mike
    June 5, 2019
    Will these push rods fit both cylinders?
    For model number 407577-0284-E1
    Hi Mike, Thank you for your question. Yes, these push rods will fit both cylinders. I hope this helps. Thank you and have a great day!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Tom
    April 12, 2018
    What would cause both push rods to be bent on the right side and aren't functional?
    For model number B&S 40H7770242E1
    Hi Tom, Thank you for your question. Usually when something like this happens it is because the valve is malfunctioning and these parts get bent by the piston. I hope that helps. Good luck with your repair.

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Greg
    May 27, 2019
    Which push rod is aluminum for this model?
    For model number 331877
    Hello Greg, thank you for contacting us. We will be happy to look into this, but we will also need the type and code number from the unit, as there are multiple variations for the model listed. We look forward to hearing back from you.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Leonard
    October 3, 2019
    Are both pushrods the same length?
    For model number 31P677-1373-B2
    Hi Leonard, Thank you for your question. Yes, the push rods would be the same length. The push rods are approximately 9-1/2 inches long. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    John
    July 8, 2021
    On my factory-original pushrods, the intake rod is aluminum, and the exhaust rod is steel. I notice that the steel replacement on your site is no longer available. Why the difference? Are they the exact same size? Why is aluminum acceptable for exhaust?
    For model number 44P777-0027-E1
    Hello John, Thank you for the question. The are the same size and it will fit. Briggs and Stratton has made changes over time and only makes it in Aluminum. For more specialized assistance or to speak with someone about this, we would suggest calling Briggs and Stratton directly. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Greg
    May 27, 2019
    The aluminum push rod, is it the intake or exhaust rod?
    For model number 331877-2371-G5-12010370
    Hello Greg, thank you for your question. This Aluminum Push Rod is used for the Exhaust Valve, but is not the replacement for your model. For your model the replacement is part PS9066108.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 2.6 / 5.0, 2 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        the head blew a vaulve guide destoying push rods
        about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
        Other Parts Used:
        Cylinder Head Cylinder Head Rod-Push (Steel)
        • Robert from WHITMAN, MA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          More than 2 hours
        12 of 16 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        valve problem causing pushrod damage
        pinged valve guide reinstalled head with new gasket inserted rods adjusted valve 15 min. later mowing lawn first time doin such repair note used magnet to pull old rod inside engine to drain left in rotated engine maling sure no parts broken started up and away i went c how long it lasts mower had over6500 hrs.. on it
        Other Parts Used:
        Gasket-CylinderHead Gasket-Exhaust Rod-Push (Steel)
        • george from HALLWOOD, VA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Screw drivers, Socket set, Wrench set
        4 of 7 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS9073139
          Manufacturer Part Number: 690982
          Brand
          Model Number
          Description
          Toro
          13AT61RH048
          Lawn Tractor - LX466 Lawn Tractor
          Toro
          13AT61RH544
          Lawn Mower - Lx466 Lawn Tractor, 2008
          Toro
          13RT61RH044
          Lawn Mower - Lx466 Lawn Tractor, 2008
          Toro
          13RT61RH244
          Lawn Mower - Lx466 Lawn Tractor, 2008
          MTD
          17ADFACQ093
          Lawn Mower - Rear-Engine Riding Mower
          MTD
          17ADFACS093
          Lawn Mower - Rear-Engine Riding Mower
          MTD
          17ADFACT093
          Lawn Mower - Rear-Engine Riding Mower
          MTD
          17ADFACW093
          Lawn Mower - Rear-Engine Riding Mower
          MTD
          17BKCACS099
          Lawn Mower - Rear-Engine Riding Mower
          Snapper
          28829
          Lawn Tractor - Front-Engine Lawn Tractor
          Briggs and Stratton
          401577-0123-B1
          Engine - Engine
          Briggs and Stratton
          401577-0124-B1
          Engine - Engine
          Briggs and Stratton
          401577-0125-B1
          Engine - Engine
          Briggs and Stratton
          401577-0126-B1
          Engine - Engine
          Briggs and Stratton
          401577-0127-B1
          Engine - Engine
          Briggs and Stratton
          401577-0128-B1
          Engine - Engine
          Briggs and Stratton
          401577-0129-B1
          Engine - Engine
          Briggs and Stratton
          401577-0130-B1
          Engine - Engine
          Briggs and Stratton
          401577-0131-B1
          Engine - Engine
          Briggs and Stratton
          401577-0132-B1
          Engine - Engine
          Briggs and Stratton
          401577-0133-B1
          Engine - Engine
          Briggs and Stratton
          401577-0134-B1
          Engine - Engine
          Briggs and Stratton
          401577-0134-B2
          Engine - Engine
          Briggs and Stratton
          401577-0135-B1
          Engine - Engine
          Briggs and Stratton
          401577-0135-B2
          Engine - Engine
          Briggs and Stratton
          401577-0724-E1
          Engine - Engine
          Briggs and Stratton
          401577-0887-B1
          Engine - Engine
          Briggs and Stratton
          401577-0996-B1
          Engine - Engine
          Briggs and Stratton
          401577-1219-B1
          Engine - Engine
          Briggs and Stratton
          401577-2219-B1
          Engine - Engine

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service