MTD Chipper Shredder Parts | Same Day Shipping | Millions of Parts

Popular MTD Chipper Shredder Parts

Your Price
$15.45
Flail
PartSelect Number PS9155584
Manufacturer Part Number 91459B
Fixes these symptoms
No Symptoms for this part
Your Price
$14.90
Lawn Mower Ground Drive Belt
(1)
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work gloves to protect your hands when installing this part.
Fixes these symptoms
No Symptoms for this part
Your Price
$3.27
Washer-Lock 5/16
PartSelect Number PS9311087
Manufacturer Part Number 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent the nut from backing off and becoming loose on the pulley shaft, and is attached to the drive belt pulley assembly. You will know if you need this because your owners manual will specify it, or the model number of your machine will correspond with this part. If the part is broken due to fatigue, the shafts will free spin when they should be locked together, and must be replaced.
Fixes these symptoms
No Symptoms for this part
Your Price
$21.30
Chipper Blade
PartSelect Number PS9462700
Manufacturer Part Number 981-0490
The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened or replaced. If the blade is warped or damaged, this OEM part will be the right replacement if recommended by your owner's manual.
Fixes these symptoms
No Symptoms for this part
Your Price
$5.09
Fl. Bearing
PartSelect Number PS9302372
Manufacturer Part Number 741-0487C
Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually. When this part malfunctions, you may notice the shaft becomes very sloppy or comes disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers. Customers rate this repair as Medium difficulty.
Fixes these symptoms
No Symptoms for this part
Your Price
$27.91
Blade
(1)
PartSelect Number PS9166480
Manufacturer Part Number 942-0571
Fixes these symptoms
No Symptoms for this part
Your Price
$7.53
3-Arm Thumb Scr. 5/16-18 x .75" Lg.
PartSelect Number PS9099092
Manufacturer Part Number 720-0170
Used for quick release of components, such as handles, this 3 Arm Thumb Screw is a manufacturer-sourced replacement part for hundreds of models of blowers and chippers. It is made of plastic and metal, is not sold as part of a kit or assembly, and is sold individually. This part is known to wear over time. If the threads become stripped, the handle is visibly damaged, or you can no longer tighten or loosen it, you will need to replace it. No tools are required to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Your Price
$7.21
Push Cap
PartSelect Number PS9300605
Manufacturer Part Number 726-0214
The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down in a way that could cause injury, it should be replaced. Refer to your make, model and diagrams to check if this is the right part for you.
Fixes these symptoms
No Symptoms for this part
Your Price
$7.31
Lever & Knob Assembly
(1)
PartSelect Number PS10034156
Manufacturer Part Number 94832
The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.
Fixes these symptoms
No Symptoms for this part
Your Price
$30.13
Shredder Screen
PartSelect Number PS9305227
Manufacturer Part Number 781-0457-0637
Fixes these symptoms
No Symptoms for this part