Part Location Diagram of WR02X10098 GE Evaporator/Condensor Fan Grommet
See part 615 in the diagram
Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Evaporator/Condensor Fan Grommet WR02X10098

★★★★★
★★★★★
11 Reviews

Rated by 15 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 11.59
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS284555
Manufacturer Part Number WR02X10098
Manufactured by GE
Product Description

Evaporator/Condensor Fan Grommet Specifications

This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet

Replacing your General Electric Refrigerator Evaporator/Condensor Fan Grommet
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Freezer section too warm | Clicking sound
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR02X10098 replaces these:
AP3647189, 772715, WR02X10822, WR2X10098, WR2X10822
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.9
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 15 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
noise from fan blade hitting refrigerator interior panel.
The hardest part of the repair was emptying the freezer, next was getting the fan off of the motor shaft, The only reason the job was difficult is because i am 67 years old and not as flexible as i used to be.I had a tough time getting the fan off of the motor shaft, but i got it off with the use of a vise, and had to use the hammer and a socket to install a new fan blade.
Other Parts Used:
Evaporator Fan Blade Evaporator Fan Grommet - Red Evaporator/Condensor Fan Grommet
  • Dennis from LEHIGHTON, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy freezer fan
Fast and easy-great video instructions for each part ordered.
All parts perfect fit.
My refrigerator is running like new again-good for another 10 years!
Other Parts Used:
EVAPORATOR FAN MOTOR Evaporator Fan Grommet - Red Lid Bumper Evaporator/Condensor Fan Grommet
  • Robert from PITTSBURGH, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud screeching noise from freezer during cooling cycle
I replaced the fan motor and one of the grommets. When I took the motor out it was clear it was failing because there were metal flakes from the motor on the fan blade. I followed the instructions on the posted video. My model did not have a removable bottom tray in the freezer so that was one less thing to do. Aside from that the video was accurate. I had two minor problems during reinstallation. First, it was very difficult to get the spring clamp back on the fan blade without pushing it against the motor. Recommend you get someone to help hold the spring open while you push it on. Second, the length of wire on the replacement was not exactly the same as the original and I had to move some wires around. Recommend you take a picture of the cable layout before disassembling.
Other Parts Used:
EVAPORATOR FAN MOTOR Evaporator/Condensor Fan Grommet
  • Gabriel from WASHINGTON, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan motor was making an intermittent (very annoying) squealing noise.
Located the model number on the inside wall of the unit. Wanted to make sure to order the correct product.Because of the age of the refrigerator I ordered the rubber mounting grommets. In this model the mounting frame is built at an angle that makes the removal and reinstall very easy. Remove two screws and the motor is loose. The fan blade easily pulls off the shaft of the motor . Clean up the fan and reassemble.
Other Parts Used:
Condensor Fan Motor AC/DC Evaporator/Condensor Fan Grommet
  • Larry from SHERWOOD, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy
I didn’t do the repair because I ordered two grommets. When they arrived, one of the packages was empty! Instead of just sending me another one, they refunded the part so I still need one. By the way, I was not refunded half the shipping either which was more than the part itself.
  • Brad from SPRING MILLS, PA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise from Condensor Fan and Fan Motor.
I watched the video provided by PartSelect twice, then proceeded with the removal and installation. It took me 40 minutes from start to finish. Piece of Cake. Everything works fine now.
Other Parts Used:
Condenser Fan Motor Condenser Fans Blade Assembly Evaporator/Condensor Fan Grommet
  • Kevin from BENSALEM, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisey Compressor Cooling Fan
Wow, end result was amazing. I had to place my ear close to the refrigerator to find out if the fan was working. So quiet. Prior to this we could hear it in the bedroom. I replaced the fan motor, blade, grommets, i.e. the whole fan train. There were two screws holding the fan which were removed. (After removing the back panel.) Then removed the old blade and dust cap. Detached the wiring harness at the junction. Then reassemble in the reverse order. I screwed up the 1st time...installed the front motor grommet in reverse. Fan blade was not centered. Resulted in a few mins rework. Actually spent more time cleaning all the dust from the compartment and behind the refer than it took to install the new fan system. Did I say that I couldn't be more pleased with the no noise result?
Other Parts Used:
Condenser Fan Motor Condenser Fan Blade Condenser Fan Blade Compression Ring Dust Cap Evaporator/Condensor Fan Grommet
  • Robert from TUCSON, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a 'ticking' sound
Separately (from a different site) purchased new compressor fan and motor. I purchased the grommets here because the other site listed the grommets as temporarily out of stock. I did watch one of the videos on PartSelect about the grommet replacement. Repair was pretty simple, biggest challenge was getting to the screw on the far side of the motor. Removed the two screws holding the fan motor into place. Removed motor and blade. Reinstalled with new fan blade, new grommet and new motor.
  • John from PARKVILLE, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
NOISE FROM THE FREEZER SECTION OF THE REFRIGERATOR
1) TURNED POWER OFF FROM REFRIGERATOR 2) REMOVED THE FREEZER SHELF FIRST BY GENTLY TAPPING THE LEFT SIDE UP AND OUT THEN THE RIGHT SIDE UP AND OUT 3) REMOVED THE 2 PHILLIPS SCREWS HOLDING THE EVAPORATIVE FAN COVER IN PLACE 4) GENTLY PUSHED THE COVER UP AND MAKING SURE THE 2 CLIPS WERE NOT DAMAGED 5) VERY GENTLY PUSHED UP ON THE STYRO FOAM SHIELD GRASPING IT FROM THE BOTTOM, BE VERY CAREFUL NOT TO CRACK OR DAMAGE THIS 6) THEN REMOVED 4 OF THE PHILLIPS SCREWS HOLDING THE BACK PANEL 7) THEN REMOVED THE 2 SCREWS HOLDING THE FAN MOTOR IN POSITION ON THE BACK COVER AND LAID THAT ASIDE 8) I COULD THEN SEE THE MOTOR SO I UNCLIPPED THE RED/DARK WIRE CLIP FROM THE HARNESS WITH MY FINGERS, THEN TOOK MY NEEDLE NOSE PLIERS AND GENTLY PULLED UP ON THE GREEN GROUND WIRE 9) I THEN REMOVED THE 2 PHILLIPS HEAD SCREWS HOLDING THE MOTOR BRACKET TO THE WALL OF THE FREEZER 10) THEN REMOVED THE ENTIRE MOTOR AND PUT THAT ON THE KITCHEN TABLE 11) TOOK MY NEEDLE NOSE PLIERS AND VERY, VERY GENTLY PRIED OFF THAT LITTLE METAL RING HOLDING THE FAN BLADE ON (TRICKY SO LEFT UP GENTLY)...I BOUGHT ADDITIONAL IN CASE I DAMAGED IT 12) TOOK MY 5/16 NUT DRIVER AND UNSCREWED THE TOP METAL BRACKET HOLDING THE MOTOR 13) LIFTED THE MOTOR OFF AND LOOKED AT THE TOP AND BOTTOM GROMMETS TO SEE IF DAMAGED OR CRACKED (I BOUGHT ADDITIONAL GROMMETS IN CASE THEY WERE CRACKED OR DAMAGED, EASY FIX) 14) THEN ATTACHED THE NEW MOTOR AND BASICALLY SIMPLY DID EVERYTHING IN REVERSE TO INSTALL THE NEW MOTOR. MAKE SURE YOU KEEP YOUR SCREWS IN ORDER SO YOU CAN IDENTIFY WHICH PART THEY CAME FROM. MAKE SURE YOU DO NOT PINCH AND WIRES WHEN RE-INSTALLING THE MOTOR. SAVED ME A REPAIR PERSON CALL.
Other Parts Used:
EVAPORATOR FAN MOTOR Compression Ring Evaporator/Condensor Fan Grommet
  • Sarafina from DEWEY, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan making an intermittent loud noise
Well the repair would have consisted of simply removing the old fan, and installing the new one, however, the replacement fan sent had a female connector on it, when it should have been a male connector. So, I had to take the connector off the old fan, and splice it onto the new one. This turned a really simple job into more of a project, which I was not planning on.
Other Parts Used:
Condensor Fan Motor AC/DC Compression Ring Evaporator/Condensor Fan Grommet
  • Jeanne from QUINCY, IL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
November 19, 2017
Does this include two bushings?
PartSelect logo
Hi Jim, Thank you for the question. The Bushings are sold individually. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Susanna
September 2, 2019
What on earth is the difference between this and wr02x12008? I have replaced my fan motor but it’s making an awful grinding noise.
For model number GTS18FBRERWW
PartSelect logo
Hello Susanna, Thank you for the question. The WR02X10098 is shown in the Condenser fan diagram and is used for the Condenser fan. You will need the Grommet for the Evaporator fan in the freezer WR02X12008. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Reynalda
June 24, 2019
I have replaced the fan motor condenser and one thermostat on fridge and my fridge is still to warm spoiling all my food
For model number Ham 25gftgsa
PartSelect logo
Hello Reynalda, thank you for your question. We would recommend testing the sensor, defrost heater, defrost thermostat and the evaporator fan motor. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tim
January 13, 2022
I want to replace the condenser fan and the evaporator fan grommets for my kenmore fridge model 106.70262990. I cannot seem to find the correct part numbers for the grommets. Any help would be much appreciated. Thank you.
For model number 106.70262990
PartSelect logo
Hello Tim, thank you for writing. The Condenser Fan Motor Kit is PartSelect Number PS395284. The Evaporator Fan Blade PartSelect Number PS11738954. The Nut is not sold separately. It is sold in Evaporator Fan Blade Kit PartSelect Number PS304684. We hope to hear from you soon.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS284555
Manufacturer Part Number: WR02X10098
Brand
Model Number
Description
General Electric
31181-1
Refrigerator
General Electric
31191-1
Refrigerator
General Electric
3210-00L0S00-A
Refrigerator
General Electric
3210-00R0S00-A
Refrigerator
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
Kenmore
36348042891
Refrigerator
Kenmore
36348042892
Refrigerator
Kenmore
36348042893
Refrigerator
Kenmore
36348042894
Refrigerator
Kenmore
36348042896
Refrigerator
Kenmore
36348042897
Refrigerator
Kenmore
36348047891
Refrigerator
Kenmore
36348047892
Refrigerator
Kenmore
36348047893
Refrigerator
Kenmore
36348047894
Refrigerator
Kenmore
36348047896
Refrigerator
Kenmore
36348047897
Refrigerator
Kenmore
36348252891
Refrigerator
Kenmore
36348252892
Refrigerator
Kenmore
36348252893
Refrigerator
Kenmore
36348252894
Refrigerator
Kenmore
36348252896
Refrigerator
Kenmore
36348252897
Refrigerator
Kenmore
36348257891
Refrigerator
Kenmore
36348257892
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service