This V-shaped drive belt is 29 1/2 inches long x 1/2-inch-wide, and fits both front-load and top-load washing machines. When belts are worn or frayed, they are known to make noise. If you have a top-load washer, a drive belt may be connecting the transmission to the drive motor. It would generally be a rubber V-belt covered in fabric to allow free movement. Or it could be a rubber belt aided by a tensioning device like an idler pulley, to stop the motor from causing too much friction to the belt. For front-loaders, the drive belt goes between the drive motor and the wash basket. If your drive belt is worn or frayed, it should be replaced straight away. After replacing the drive belt, run a wash cycle to ensure the belt is correctly fitted.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer V-Style Drive Belt
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Burning smell | Spins slowly | Will not drain
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nancy S - December 15, 2022
Verified Purchase
Easy repair.
The video was a great help with your suggestion of what repIr was needed.
In working order and your sevice is excellent.
★★★★★
★★★★★
Ellen K - September 23, 2021
Verified Purchase
part and video are great!
T bought a new belt for my clothes washer and used the video on the website to put it in. It worked great!
★★★★★
★★★★★
Terry L - April 2, 2019
Verified Purchase
Easy repair
The belt came fast and was ready to install with the video included in email receipt.
★★★★★
★★★★★
Morton F - March 26, 2019
Verified Purchase
Part worked as expected
The belt came within the quoted time and once installed (easy) the washing machine is working well.
★★★★★
★★★★★
Richard S - March 11, 2019
Verified Purchase
Great Service
Part was sent promptly and I liked thT installation instruction video was sent to make installation easy
★★★★★
★★★★★
William P - August 18, 2018
Verified Purchase
Perfect fit
Got part fast and it was simple to install...washer has been working great ever since with no issues. Price was decent as well as a repairman would cost 60 for visit and 27 for part.
★★★★★
★★★★★
Ray E - May 3, 2018
Verified Purchase
Part was as expected. Delivery time was great.
The V belt was as I ordered and arrived ahead of time. Repairs were simple and complete. Washer works fine.
★★★★★
★★★★★
Raymond G - February 21, 2018
Verified Purchase
The belt was good, but the service was great
I was surprised when I got the message that the belt was shipped. A link was provided to a video that showed how to replace it. This is a real innovation. I wish all suppliers of parts did this. Thanks!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 33 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hub washer replacement
I noticed a loud noise during the spin cycle, I purchased a bearing, but after taking the washer apart, I realized that the hub was worn out, I replaced the bearing and other parts to put it back in running condition, it was a worthwhile job, and cost saving. I have to thank partselect for the helpful videos.
i Had washer up side down took puly out and transmission seal out used screw driver install your part add seal on it tap it back in used socket added quartz of gear oil90 as recommended put every thig back it good experience and saved hundreds of dollars for new ones thank so much for ur video and ur technical people on your site
Repair not yet done. Video incorrectly shows a different washer not the model number shown above. I stopped immediately and did not proceed until I had more time to investigate further. Video showed washer where the front panel is easily removed. My washer does not have a front panel which can be removed. Front panel is one piece with sid
... Read morees. Access is obviously from below or from the back. I will try to move out the washer and try to see what's visible from the rear.
Unfortunately, this washer doesn't have a front panel: to get to the belt, removed the back panel. Unfortunately, you can't get to the belt from there either, unless you turn the washing machine upside down. Since the top of the washer is not level (control panel sticks up), the washer needs to be tipped upside down onto something the was
... Read moreher lid rests on, but keeps the control panel off the ground. We used...a sled. Unfortunately, since it didn't drain the last time used, even though we bailed the tub, there was still a fair amount of water that drained out once upside down. This is a heavy washer - took 3 of us tipping it over carefully onto the sled. We unbolted the motor, put in new belt, but needed to put a piece of the shifter arm assembly in place, which came loose. Took 2 sets of hands to accomplish all this. Works now - 2 small loads of laundry done successfully.
Read less
Karen from BALTIMORE, MD
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would pump but not spin.
Viewed video on installation of new belt. A little awkward to get to the rear bolts, but used a wrench with success. Now washer spins correctly. Thank you.
Thomas from ST PETERSBURG, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was not agitating or spinning
I followed the instructions on your website to diagnose the problem, select the part needed for the repair, and fix the problem. Everything was as described in the video.
Joseph from BETHESDA, MD
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud noise when spining
I did watch the video, that Parts Select included in an email. After that just follow the instructions in the video. You do need two people to do the job, since the belt needs to be tight. One for holding and one to tight the screws.
nydia from melbourne, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It wouldn't spin!
Could smell burning rubber as it tried to spin, so figured it was the belt. No, I did no do it the hard way by removing the screws etc. I threaded the belt on the pulleys on one side, and slowly turned them, using my fingers to force thread the belt into place. Worked like a charm.
Eric from Cedar Park, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing Machine Pump
The website was tremendous. Everything was right there, easy to understand. The 'repair' video was outstanding; made it sooooo much easier. Would use this site over and over again (but hope I don't have to use it that much! lol).
Agitator was not working during wash, would during end spin cycle
The worst part was removing the agitator. I finally found a thread that explained you have to pull directly up to release the 'clips' that held the agitator to the coupler. I used my kids' jumprope, tied around a thick, 4 ft. dowel, with the other end tied around the agitator fins. The key was making sure the rope was straight above th
... Read moree top of the agitator. It took my entire body weight on the dowel/lever to get the agitator to pop off, but it finally did. After that, repair took about 45 seconds. I was thrilled that the diagnosis (with the complete help of this website) was right and that was all it took. Coupler arrived within 2 days. I also ordered the belt, in case that was the problem, and a new nut (good thing, mine was rusted). Thank God this was the solution- especially since my 5 yr old has the stomach flu and I have lots of laundry- no time for the machine to be down! Fantastic customer service and help diagnosing problem on this site!!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
22 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
August 24, 2017
My washer doesn't agitate or spin but sounds like it does. Door latch is fine and i just replaced the drive belt but it still won't work. I'm thinking of replacing the agitator block next. Any ideas?
For model number WCSR2090G3WW
Hi Susan,
Thank you for your inquiry. I would suggest taking a look at that part and seeing if it is stripped or broken in any way. If it looks fine though, you may have to look into your transmission and motor. It could be that those parts are trying to work but they are not. Also check your drain pump and motor as well. That can also cause a machine not to agitate if the pump cannot drain. First take a look through the pump filter and see if there are any blockages. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
November 5, 2018
My washer drains/spins and dispenses fabric softener when its empty or has a few items in it. It will drain, but not spin a half or full load. My clothes are soaked. I have already checked the lid connection (by resetting) and took the white hose from the pump and found no obstruction. (not sure if its normal, but there wasn't a filter in the pump either) the little fan type thingy in the pump, wasn't easy to move, but moved). Seems this all happened after a load of towels. The drum seems to move around to easily, but not sure if that's normal either. Help!! i have a kid who plays hockey :)
For model number WHDRR418E1WW
Hi Mary, thank you for your question. Yes, if your appliance will no longer spin when you have medium to heavier loads, I would suggest checking your belt first. That part does wear down over time and it might have just worn down with the heavier load you were doing. Also you are generally not supposed to force that impeller in your drain pump to move because that can burn out the motor. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
February 10, 2018
Front panel dose not remove from the cabinet rear access only how do i access belt to replace
Hello Jeff, Thank you for your inquiry. I was able to find the following instructions for changing the belt with rear access only for a GE washer. You can remove the back cover by taking out the screws. Remove the coupling between the motor and the pump, removed the belt, you may want to clean the grease off of the pulley. Put the new belt on the smaller pulley, put the new belt on the larger pulley as much as I could, and then turned the larger pulley until the belt jumped on the pulley. I put the coupling back on between the motor and the pump, putting on the lower clamp first and then the upper clamp. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
November 14, 2018
Thanks for your response. The machine agiates and spins beautifully while empty. Replaced belt (old one was in perfect condition), took off agitator coupling and it seems perfect too. The spine grooves were covered in globs of,i'm assuming fabric softener. Cleaned that and it still wont spin with clothes in it. What next?
For model number WHDRR418E1WW
Hello Mary, Thank you for contacting us. The next part to check would be the Capacitor, PartSelect Number PS3406186. This part increases the voltage to the drive motor to help get up to speed. If the capacitor is good, you may have a defective motor, PartSelect Number PS756764. There will be to wire leads connected to the motor. Disconnect the motor's two wire leads from the wiring harness. Set your multimeter to the R x 1 setting. Touch each of the meter's probes to one terminal each. Your motor should show little resistance (a reading of zero, or close to zero). Now check the ground connection. Place one probe on the bare metal housing of the motor. Place the other probe on each terminal, one at a time. You should not receive any reading on your meter from this test. If your washer's motor fails either of these tests, you will have to replace it. Hope this helps, good luck with this repair!
Upon starting the agitation cycle (both wash & rinse), there is a series of loud squeaking / groaning noises, (somewhat like damp rubber soled shoes on a linoleum floor) that seem to coincide with each movement of the agitator. The noises subside after a couple of minutes and go away until the next cycle that "agitates". It then repeats. The fill, drain, & spin cycles have no issues or unusual sounds. Any suggestions?
For model number WHDSR109J5WW
Hello Denny, thank you for inquiring. This may be caused by a faulty Tub Dampening Strap, part number PS271100 for your model. You may also want to consider this V-Style Drive Belt part number PS270803 as the cause. I hope this helps and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Wes
August 12, 2017
Washer fills and agitates and drains but doesn't spin. Lid shut off switch seems ok -- stops machine in agitate. Drive belt seems ok, not too worn or lose and works fine in agitate mode. Motor just doesn't activate belt in spin mode.
For model number GE whdsr209g9ww
Hi Wes,
Thank you for your inquiry. You will probably want to check your drain pump and motor next. If that part is not working then you will not go into your drain/spin cycle. You can just give this part a visual inspection and then test it with a multi-meter to see if the electrical is fine as well. If this part is alright, you might be looking into replacing your transmission. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
December 24, 2017
Hotpoint top loading washer agitates and spins intermittently.Everything else seems to be working.This situation does not allow clothes to expel water making them heavy and difficult to dry. Does this sound like a worn out belt or some other problem? Btw we did detect a burning rubber smell before we observed these problems.
For model number VBSR2080W0WW
Hi Anthony, Thank you for the question. With the smell and intermittent spinning, I suggest replacing the belt.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
May 3, 2018
My washer isnt spinning, but i can hear the motor running. Does that sound like a belt problem? The belt isnt broken, but i can barely get it to move. I havent used the machine in a couple of years, could it just need wd40?
For model number WPSQ3120T2WW
Hello Donna, thank you for your question. There are a few parts you will want to check, the
V-Style Drive Belt
Part Number: WH1X2026, and the pulley that the belt rides on, which is attached to the motor. The motor might be running but it might be seizing up and turning easily. If the motor pulley is hard to turn the motor will have to be replaced. It would also be a good idea to check the Clutch and Retaining Clip Part Number: WH5X256 and the Transmission and Brake Assembly Part Number: WH38X10002 for any wear and tear. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janice
January 23, 2019
Washer does not spin on any setting. It fills, agitates, and drains. No spin. Checking it we tilted it so we could see underneath and we put it through its paces (water d/ced) and the motor kicks in and belt turns to agitate, but when it comes to spin cycles (any spin cycle) motor does not turn on and belt does not move. Note again -- belt turns when agitating. Motor does not turn on (pump does) and belt does not turn at spin. Need some help on this.
For model number S3700E4WW
Hello Janice, Thank you for the question. I suggest replacing the Lid Switch Assembly, PartSelect Number PS5135698. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning. If defective it will not allow the spin cycle to start thinking the lid is open. Thank you for your inquiry, good luck with this repair!
My washer will not agitate but it will fill drain and spin? Can you help me.
For model number GTWP1000MOWW
Hello William, thank you for inquiring. For this symptom you will want to replace either the Agitator part PS11736866, the Agitator Coupling part PS1482517, or the V-Style Drive Belt part PS270803. We hope this helps.
