Ice Mold and Heater Assembly WPW10300025

Hi Gina, Thank you for your question. If the ice maker is not dropping ice from the mold, then there may be an issue with the heater and this part should fix the issue. I hope this helps. Thank you and have a great day!

Hello, Thank you for your question. This is the ice mold where the ice is formed. If you are looking for ice bin where the ice is deposited once the ice has been made, the part number for it is PS11731153. I hope this helps. Thank you and have a great day!

Hi Luis, Thank you for your question. If your ice maker is not making ice, there are some parts that you will need to check to see which one is causing the issue. You will need to check the ice maker, the water filter, the water inlet valve and the water fill tubes. If the tray lining for the ice maker is breaking then you will likely need to replace the ice maker. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!

Hello Rita, thank you for reaching out. The parts you need are the ice maker fan motor, part number PS11749292, and the ice container, part number PS11752872. The auger does not come separately it comes as a part of the ice container. We hope this information helps!

Hi Jerry, Thank you for your question. If the ice maker is not making ice, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=AFI2539ERM01&mfgModelNum=&fkMfgID=1&ost=AF12539ERM01&ModelMasterID=820119&PID=12. I hope this helps. Thank you and have a great day!

Hello Rhonda and thanks for writing. This part should indeed fix this problem. We hope this helps. Please contact us anytime.

Good Day Michele. Thank you for your question in regards to your unit (Model Number 10651792410). Based on our research, your water fill tube or water lines may be frozen and you may need to have them thawed out. This could be the result of the temperature in your unit being set to low and you may need to reset it to keep it from continuing. You may want to also test the water inlet valve. The water inlet valve controls the flow of water into the ice maker and is located in the rear of the refrigerator behind the back access panel. Sometimes this part can go bad and overfill the ice cube tray when it is not needed. In regards to the arm, are you referring to the Arm-Ejector? If so the PartSelect Number for that part is PS3407873. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

Hi Ruth, Thank you for your question. We have a 30-day return period. Here is a link to our return policy, https://www.partselect.com/Thirty-Day-Returns.htm. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hello Leslie, thank you for contacting us. Check to see if there is clogging in your water supply line. A blocked water supply line can cause the issue. If the supply lines are clear, check if your inlet valve is working. A faulty water inlet valve can stop the flow of water and result in no ice. If the inlet valve, part number PS11755667, is faulty, you may need to replace it. We hope this helps!

Hi Angela, thank you for your question. There are really only a few parts that could be the issue. You may want to check your ice maker itself and the water inlet valve. You can test both of those parts to see what may be causing the issue. You can test the valve with a multi meter. If both of those parts are fine, then you may have an issue with the control board. I hope that helps. Good luck with your repair.