Models > 10650022210

10650022210 Kenmore Refrigerator - Overview

Sections of the 10650022210

[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(63)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$7.32
  In Stock
Lower Door Closing Cam – Part Number: WP2182179
Lower Door Closing Cam
★★★★★
★★★★★
(84)
PartSelect #: PS11739042
Manufacturer #: WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
$8.53
  In Stock
Refrigerator Crisper Drawer With Handle – Part Number: WP2188664
Refrigerator Crisper Drawer With Handle
★★★★★
★★★★★
(106)
PartSelect #: PS11739122
Manufacturer #: WP2188664
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air f...
$123.40
  In Stock
Refrigerator Ice and Water Filter – Part Number: EDR1RXD1
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(89)
PartSelect #: PS11701542
Manufacturer #: EDR1RXD1
This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
$81.43
  In Stock
Ice Bin Auger Drum – Part Number: 4388736
Ice Bin Auger Drum
★★★★★
★★★★★
(23)
PartSelect #: PS372186
Manufacturer #: 4388736
This white ice bin auger drum comes with a washer.
$61.38
  In Stock
Refrigerator Slide-Out Shelf with Glass – Part Number: WPW10276348
Refrigerator Slide-Out Shelf with Glass
★★★★★
★★★★★
(49)
PartSelect #: PS11751713
Manufacturer #: WPW10276348
$156.14
  In Stock
Bi-Metal Defrost Thermostat – Part Number: WPW10225581
Bi-Metal Defrost Thermostat
★★★★★
★★★★★
(25)
PartSelect #: PS11750673
Manufacturer #: WPW10225581
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-met...
$43.36
  In Stock
Gallon Door Bin - Clear – Part Number: WPW10710203
Gallon Door Bin - Clear
★★★★★
★★★★★
(60)
PartSelect #: PS11757236
Manufacturer #: WPW10710203
Sold individually. This door bin is for refrigerators. The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
$37.94
  In Stock
Ice Bucket – Part Number: WPW10670845
Ice Bucket
★★★★★
★★★★★
(51)
PartSelect #: PS11757044
Manufacturer #: WPW10670845
Bucket only. All other parts sold separately. This part holds the ice once it's released from the icemaker.
$97.56
  In Stock
Crisper Cover with Glass – Part Number: W10508993
Crisper Cover with Glass
★★★★★
★★★★★
(19)
PartSelect #: PS4082908
Manufacturer #: W10508993
This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on th...
$130.24
  In Stock
Refrigerator Shelf Glass – Part Number: W10864399
Refrigerator Shelf Glass
★★★★★
★★★★★
(20)
PartSelect #: PS11731733
Manufacturer #: W10864399
This is the glass panel only. The frame is sold separately.
$109.67
  In Stock
Crisper Pan - Clear – Part Number: WPW10178772
Crisper Pan - Clear
★★★★★
★★★★★
(22)
PartSelect #: PS11749661
Manufacturer #: WPW10178772
Sold individually. This crisper drawer is clear in colour. The crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.
$87.59
  In Stock

Questions And Answers for 10650022210

Be the first to ask our experts a question about this model!

Common Symptoms of the 10650022210

[Viewing 21 of 21]
Door won’t open or close
Fixed by
these parts
Show All
Fridge too warm
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Show All
Light not working
Fixed by
these parts
Show All
Ice maker not making ice
Fixed by
these parts
Show All
Freezer not defrosting
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Clicking sound
Fixed by
these parts
Show All
Freezer section too warm
Fixed by
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Show All
Frost buildup
Fixed by
these parts
Show All
Not dispensing water
Fixed by
these parts
Show All
Fridge too cold
Fixed by
these parts
Show All
Door Sweating
Fixed by
these parts
Show All
Freezer too cold
Fixed by
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Show All
Too warm
Fixed by
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Fridge runs too long
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Plastic bits dispensed from Ice Dispenser in Door
Removed Ice bin from Fridge

Removed all bolts on bin with nut driver...about six

Removed housing...be careful with spring on crusher/cube control rod

Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.

Removed plastic nut on end of auger shaft

Removed Ice crusher jaws and laid them out in the correct order

Removed Ice propeller and installed new part

Put back together in opposite order

Easy
Parts Used:
Ice Bin Auger Drum
  • john from seaford, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
201 of 222 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge was getting too warm, ice buildup on coils.
WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

Part Info:
The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is not functioning properly you may notice ice buildup preventing air flow (and preventing proper refrigeration), or more rarely the freezer side may get too warm during the defrost cycle.

Materials:
* Replacement bi-metal strip
* Wire cutters
* Wire strippers
* Wire nuts
* Electrical tape
* 10MM socket

Steps:

1: UNPLUG THE FRIDGE! If there is ice buildup, wait until the ice has melted. A box fan blowing at the ice will help melt it more quickly.

2: Remove the panel covering the evaporator coils. It's located inside the fridge, on the freezer side.

3: Un-clip the bi-metal strip from the evaporator coils.

4: Unplug the wires from the evaporator fan, defrost coil and bi-metal strip, then disconnect the main connector that is plugged into the rear wall.

5: Clip both wires to the old ( bad ) bi-metal strip. Cut close to the casing of the bi-metal strip so there are long wires to splice onto.

6: Strip 1/4 to 1/2 inches of insulation off of the ends of the wires ( depending on the size of the wire-nuts you use). Twist the bare wires slightly to prevent fraying.

7: Do the same for the ends of the wires on the (new) bi-metal strip.

8: Take the ends of the wires belonging to the (new) bi-metal strip and the wires coming from the main plug. Take the like-colored wires, and twist the bare metal ends together.

9: Twist on wire nuts, for both sets of wires. Make sure they are snug, with no bare wire showing.

10: Tape over the wire nuts with electrical tape. Tape over the wires nuts in a spiral fashion, completely covering the nut and both wires that are now spliced together. This will prevent accidental shorting.

11: Plug the main plug back into the rear wall of the fridge. Also re-connect the connectors to the evaporator fan and defrost coil. Make sure the clips on the connectors are snug to ensure a good connection.

12: Clip the new bi-metal strip onto the coils, in the same spot as before. ( Usually just after the small incoming copper tubing that connects to the coils, known as the expansion valve. That is usually the coldest spot on the coils during operation).

13: Replace the panel that covers the coils.

14: Plug the fridge back in... Now you fridge should defrost correctly. If it does not, your defrost coil could be burned out, or the control board could be faulty.
Parts Used:
Bi-Metal Defrost Thermostat
  • Cathy from Winter Park, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
150 of 168 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
evaporator fan stopped working
1) removed the face plate that runs 3/4 way up the back of the freezer side. a total of 8 screws. (6")
2) disconnected the three electrical connections.(30sec)
3) removed the fan of the the old evaporator fan motor (5sec)
3) removed the fan motor (1")
4) put in the new fan motor (1")
5) put on the old fan on the new fan motor(5sec)
6) reconnected the three electrical connections (30sec)
7) replaced the face plate on the back of the freezer (6")
Had re-frozen meat within 1 hour.
Parts Used:
Evaporator Fan Motor - 120V 60Hz
  • Antoni from vail, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
92 of 99 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!