The EDR1RXD1 water filter provides clean, fresh-tasting water by reducing contaminants such as lead, chlorine, and particulates. Designed for easy installation, this filter ensures your refrigerator water and ice are safe and refreshing with every use
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack or wear down over time. If your door will not open and close properly you may need to replace the door closing cam. To successfully install ...Read morethis part, you will need a 5/16 nut driver and a small flat blade screwdriver. Before you begin, unplug your appliance and disconnect the water supply. Lubricating this part may help with installation. This replacement part is sold individually. This part will fit both the left and right side of your refrigerator door. To make the repair, remove the top hinge cover, then the top hinge support. Lift the door from the bottom support and remove the old door cams. Replace the cams, using a little lubricant if necessary, and place the door back on the lower hinge support. Replace the top hinge support and your repair is complete!
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food is kept within is spoiling or dr...Read moreying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. Inspect it for visible damage like cracking or warping, which should be obvious. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high and is a genuine OEM replacement part. It is sold individually. Note that there are several different types and options for the lower vegetable and meat drawers for your refrigerator, and you should check your user manual carefully to ensure that this is the drawer you are looking for.
This clear refrigerator door shelf bin is a genuine OEM replacement part designed for select Whirlpool, Kenmore, and Maytag models. Made from high-quality, food-grade PS plastic, it securely holds jars, bottles, and other items on the right-hand side of the upper refrigerator door. The bin features reinforced edges for added durability an...Read mored wear resistance, and some versions include a built-in soda can organizer for enhanced storage. Installation is tool-free, with the bin snapping directly into the designated slot. Compatibility should be verified using your refrigerator’s model number prior to installation.
Reach stored food more easily with this refrigerator slide-out glass shelf assembly. Its clear glass surface provides visible storage, while the raised white plastic frame helps contain minor spills before they reach lower shelves. Cracked glass, broken frame edges, or damaged sliding surfaces may make the shelf unsafe or difficult to mov...Read moree. Replacing a damaged assembly helps restore stable storage and smooth access. Remove food before handling the shelf, and let cold glass reach room temperature before washing to reduce the risk of cracking. This is an OEM part sourced directly from the manufacturer.
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-metal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. If your refrigerator doe...Read mores not defrost properly you can test both the thermostat and the heater to figure out which part is at fault. For this repair, you will need a Phillips screwdriver, a 1/4 inch nut driver, a flat blade screwdriver, a pair of wire strippers, a roll of electrical tape, and a few butt splice connectors.
Restore a stable surface for food storage with this refrigerator glass shelf assembly. Its clear glass panel makes items below easy to see, while the smooth surface allows spills and food residue to wipe away easily. Cracks, chips, or damaged supports may leave the shelf unsafe or unable to hold containers securely. Replacing a damaged as...Read moresembly helps restore organized, accessible storage. Remove all food before handling the shelf, wear gloves around broken glass, and let cold glass reach room temperature before washing to reduce the risk of cracking. This is an OEM part sourced directly from the manufacturer.
For dispensing, ice is stored in this OEM container in the refrigerator freezer. Auger parts are not included. Unplug the appliance before installing it and follow the owner's manual.
This refrigerator crisper drawer cover provides a shelf above the drawer while helping keep the storage area below enclosed. The clear glass surface holds food containers and makes it easy to see items underneath. Its plastic frame supports the glass and helps guide the drawer as it slides open and closed. Cracked glass, a broken frame, o...Read morer damaged drawer supports may make the cover unsafe to use. Replacing a damaged cover restores useful shelf space and helps the drawer move smoothly. This is an OEM part sourced directly from the manufacturer.
For a refrigerator storage surface, this 16-1/2 x 13-inch glass shelf slides into designated slots without tools. Confirm it fits your refrigerator before ordering.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
track of the pan become broken
426 of 450 peoplefound this instruction helpful.
Darrell from Cedar Bluff, VA
Really Easy
Less than 15 mins
Buy a new crisper pan,slide out old one ,slide in new one
Was this helpful?
Thank you for voting!
Drawer guides broken
318 of 414 peoplefound this instruction helpful.
Paula from Chesterfield, NJ
Really Easy
Less than 15 mins
Simply pulled out old drawer and replaced with new one. This broken drawer really bothered my wife so this simple repair earned me alot of points at home. Lord knows i can use all the extra points i can get. Thanks for the quick shipment of the part. 2 days from time of call to part on my door step. Thanks again
Was this helpful?
Thank you for voting!
Plastic bits dispensed from Ice Dispenser in Door
205 of 254 peoplefound this instruction helpful.
john from seaford, VA
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set
Removed Ice bin from Fridge
Removed all bolts on bin with nut driver...about six
Removed housing...be careful with spring on crusher/cube control rod
Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.
Removed plastic nut on end of auger shaft
Remov
... Read moreed Ice crusher jaws and laid them out in the correct order