Whirlpool/Whirlpool_Thumb/4RJMBESC.gif
See part 35 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Speed Governor

$17.55   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11753017
Manufacturer Part Number WPW10330804
Manufactured by Whirlpool
Product Description

Speed Governor Specifications

Also known as a clutch.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer, Range Hood, Washer.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore.
Part# WPW10330804 replaces these:
AP6019708, 17830, 4159675, W10330804
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Mike.Avad
    January 26, 2018
    The mixer seem to run to fast just on the stir senting? Why
    For model number K45SS
    Hello Mike, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: speed control plate, speed governor, the phase control board, and make sure the speed control lever and speed link are tightened and clear of debris. You can test the other parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Dean
    December 19, 2018
    Mixer is noisier than normal and 8 and 10 speed setting has no noticable change in rpm or sound. I will order the govenor, plate and phase board.
    For model number K5SS
    Hello Dean, thank you for your question. Yes, we would recommend replacing both the PartSelect Number: PS11753017 and PartSelect Number: PS11748567. While you're replacing those parts, check the worm gears and other gears in the unit and make sure they are well greased. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Rosario
    October 2, 2019
    My kitchen aid mixer broke down while i was doing a dough. It suddenly just stopped. The motor is working but the beaters don't turn. I brought it to a service center and recommended to replace the following: Governor assembly, gear worm, and control plate. Can you please send me the exact specifications for these parts for model k5ss. Would these parts be available to be purchased in the usa? How many days is shipping time from ordering? Delivery location would be in st. Pete, florida. Could you also send me details of ordering ? Thank you so much!
    For model number K5SS
    Hello Rosario, thank you for your question .The governor is PartSelect Number: PS11753017, the worm gear is PartSelect Number: PS11748374 and the speed control plate is PartSelect Number: PS11748567. Please enter the part number into the site for current price and availability. We do ship within the US and could help place the order for you and provide more information if you'd like to cal to place the order! Good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Ann
    November 26, 2018
    I have no 1st/ low speed, on 2nd speed it just sounds like grinding but won't spin. If bowl is empty it will spin on lower gears, if fill it has to be on high speed not will quit spinning after about 5-10 minutes of use? Just want to see which all parts to order? Thanks
    For model number KSM150PSBY
    Hi Ann, Thank you for your question. If you are having an issue with the speed of the mixer, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the speed governor, speed control plate and the speed control lever. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Matthew
    October 29, 2019
    The motor on my mixer is intermittent, like its losing contact intermittently. I replaced the speed control plate but it never would adjust to run smooth. Does it need brushes?
    For model number k45ss
    Hello Matthew, Thank you for the question. Yes, defective or worn brushes can cause this issue. If you remove the brushes you should be able to tell if they need to be replaced. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Matthew
    November 9, 2019
    Ok, so i replaced the speed control, the brushes, but it still runs rough and noisy. Like the contactor springy things on the back arent keeping contact. Speed is mostly constant at higher speeds but lower speeds its intermittent. Governor? Motor? Gear? Thanks again.
    For model number k45ss
    Hello Matthew, thank you for your question. It sounds like a speed governor issue. We would recommend replacing that part next. I hope this helps.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.2 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Mixer only had 2 speeds with the smell of electrical burning.
        This mixer was given to me 8-10 yrs ago with only 2 speeds (cant believe i waited this long to fix it). Repair went good, wasn't sure what i should replace so i replaced Control board, control plate, governor, grease in the gears and the transmission gasket. I first took any and ALL measurements for any screws on the control plate, this will help when you set your mixer speeds when its all back together. When installing the new governor i used a 10mm socket and a mallet to seat it all the way till it stops on the set pin. installed the new control board, with thermal grease on the back of the plate(very important). Didn't need to replace the grease in the gears, but i figured since i was in there id replace it. (No smells and all gears work) I used it to ground 5lbs of elk into burger (speed 4) after repairs and it worked great. Still have about 15lbs left to do and itll do it with out braking a sweat. Maybe i should open up a repair shop to fix these suckers...lol its that easy. What really helped with the repairs is the youtube video from Partselect. Second to none with a step by step on how to replace and repair just about anything on your mixer. Good deal, if i need to replace anything else i know where to go! Thanks
        13 of 18 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        use your phones to take pic of how the wiring is to be reconnected, take pleanty from all angles
        repair is farly simple just take your time, First attempted i didnt replace the speed covernor looked ok but had problems getting slow end to work properly decided to go ahead and install since i purchased it also and walia took care of the cogging problem. Good Luck
        • Douglas from FREEPORT, TX
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Mixer would only run Full Fast. Could not determine cause or fault.
        1. Removed the mixer back plate Cover. 2. Removed the Speed Control Plate and retained spring, wires and ground wire. 3. Removed the old Speed Control Plate screws. Noted Control Plate pitted contact. 4. Removed old Triac Phase Control Board. 5. Removed old Governor. 6. Installed new Governor. 7. Installed new Phase Control Board. 8. Installed new Speed Control Plate and retaining spring. 9. Reattached Speed Control Plate wires. 10. Adjusted Speed Control Plate Screws and set mixer speeds from Stir to maximum settings. 11. Replaced Motor Brushes on left and right side of mixer. 12. Reinstalled mixer back plate cover.
        3 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Only worked on high speed
        Followed the video on your website and it was super simple!
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Motor did not turn on.
        I removed the excess of grease to clear all parts. Then I installed new mechanical parts. Finally, I installed all electrical parts. I followed a logical sequence of removing and installing steps. Tip: Never remove parts without a logical order of sequence.
        2 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Mixer would not turn on
        Pulled off end cover. Used the how-to video's to show me how to remove the (3) components (watch out when it comes to removing the spring). Removed all (3) components (one issue was the black cardboard seal, which because of its age broke. Hindsight tells me that I should have purchased a replacement seal along with the (3) new parts.
        Fixed the broken part of the seal with scotch tape). Installed all new parts with the help of the video's and put the cover back on. Even with the new parts, the mixer would not run. Come to find out, after I took it to an appliance repair person, that someone had pulled both brushes and put them back in improperly. I could not find a how-to video that showed me how to de-install/re-install the brushes properly. I assume that was because new brushes were no longer available for purchase. At any rate, when the brushes were put in properly, everything worked. The repair person also adjusted the (2) screws on the speed control plate so that when you change the speeds via the lever, it all works properly. I didn't find a how-to video covering those adjustments either.
        • Tom from MARTINEZ, CA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Screw drivers, Wrench (Adjustable)
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11753017
          Manufacturer Part Number: WPW10330804
          Brand
          Model Number
          Description
          Kenmore
          1106102300
          Washer
          Kenmore
          1106112600
          Washer
          Kenmore
          1106201300
          Washer
          Kenmore
          1106202300
          Washer
          Kenmore
          1106202310
          Washer
          Kenmore
          1106301200
          Washer
          Kenmore
          1106301201
          Washer
          Kenmore
          1106302300
          Washer
          Kenmore
          1106302301
          Washer
          Kenmore
          1106401200
          Washer
          Kenmore
          1106402300
          Washer
          KitchenAid
          3K45SS
          Mixer
          KitchenAid
          3K5SS
          Mixer
          Whirlpool
          3KSM150PSTAQ0
          Mixer
          KitchenAid
          3KSM150PSTBW0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTCB0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTCL0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTCU0
          Mixer - MIXER
          Whirlpool
          3KSM150PSTDR0
          Mixer
          KitchenAid
          3KSM150PSTER0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTGA0
          Mixer - MIXER
          Whirlpool
          3KSM150PSTIC0
          Whirlpool
          3KSM150PSTLR0
          Mixer
          KitchenAid
          3KSM150PSTMY0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTOB0
          Mixer - MIXER
          Whirlpool
          3KSM150PSTPK0
          KitchenAid
          3KSM150PSTTG0
          Mixer - MIXER
          KitchenAid
          3KSM150PSTWH0
          Mixer - MIXER
          Whirlpool
          3KSM150PSTWM0
          Mixer
          KitchenAid
          3KSM5CBTER0
          Mixer - MIXER

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service