37511KBSERWW General Electric Refrigerator - Instructions

Very simple with repair instructions

Snapped the old shelf guard pieces out and snapped the new one in.

First thing I did was un-plug the fan motor located in the freezer compartment and test it for voltage, which it had, telling me the fan motor was shot.I ordered the parts, they arrived in short order and the fan motor was replaced. It took little time and there were no levers, pulleys,servos, gobs of wiring or stacks of gears in a maze of bearings to deal with. Unplug the unit, remove the food rack, ice cube maker(just loosen the 2 screws and lift up)remove the air channel in the center as well as the back panel. Unplug the fan motor and remove the screws securing the motor bracket and lift out. Very simple.

Received product in timely manner, Ordering was easy.thanks

it was so easy to replace the part and good experience I love when I can trouble shoot and fix the problem

I ordered the part Monday evening and had replaced the shelf on Wednesday. As easy as pie, no more difficult than the removal of a shelf when you clean the fridge.

put new frame in then slid the drawers in and replaced the glass. done!

Once I found your site(GE wanted 2x the price for just the motor) I saw the video and the rest is history.Fantastic response with support and parts. Parts arrived when you said and the work was completed in under 15 min. Working GREAT!@!LS Haney

I started at the compressor and replaced the overload and the Ptcr first and that did not make the compressor start running again, so I replaced the capasitor and it still did not start, so I bit the bulett and replaced the Main Control Board and that is what I should have checked first, when I removed the old one I found a little burnt spot on the back that I could not see from the front. The new one did not look exactly like the old one, it had two more wire terminals than the old one, but just leave them blank and everything will work just fine!

I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.

I've seen your video and I just did exactly the same as your video and that was all it took. Thanks a million!!!!

I simply followed the online video instructions.made the job easy and fun.

The new handle just took three screws matching our model refrigerator perfectly--and it is much sturdier than the original. We originally went to the GE site and they wanted $70 +shipping for the same handle. Our landlord only paid $500 for this fridge six months ago--brand new! For a total of just under $17 we got a new handle in perfect condition--delivered quickly to our door. It was exactly as described and fit our model perfectly. We couldn't be happier and will tell all of our friends about this wonderful site. Thank you!!

Connected the 2 wires and pushed in the switch until it clicked.

Remove back cardboard, slide clip off that holds capacitor in place then unplug. plug in new parts replace clip and back cover and your done! refrigerator works great again thanks for quick shipping as well.