Models > 37511KBSERWW > Instructions

37511KBSERWW General Electric Refrigerator - Instructions

All Instructions for the 37511KBSERWW
181 - 195 of 241
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Frame broke
I was so surprised when I went on line put in the model number the item came up so quickly, price was cheap I order the same day less than 2 days it arrived. Love the site will use for many things moving forward, service was quick and easy it took me less than 5 minutes total to find site and order product. I would recommend site to anyone that needs pieces for your appliances.
Parts Used:
Vegetable Drawer Shelf Frame
  • Denise from Clementon, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
defrost timer was bad
repalaced the old one with the new one. easy
Parts Used:
Defrost Timer - 120V 60Hz
  • Reese from Coconut Creek, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Loud noise from the freezer area during the defrost cycle
Removed all the freezer inside panels to inspect the motor before I ordered the part. It looked like a relatively easy job to change it. I also watched the really nice video on the website that re-inforced my confidence in doing the job. The part came in a few days. I disassembled the freezer interior exactly as the video showed.(Warning: be careful with the styrofoam piece if the fridge is not fully defrosted. The ice build-up could cause it to break when trying to pull it out!)The only problem I had was getting the little collar on and off the motor fan shaft, and getting the fan off the shaft. I had to pull really hard for it to come loose and then I had to push really hard to get it back on the new motor shaft. I didn't know if could have used any kind of lubricant or not, so I didn't. After that the re-assembly inside the freezer went well, being careful to put everything back in the correct order and position. Started the fridge back up and it has been running very quietly ever since. But, most important, my wife was impressed with my work and is very pleased with the result!
Parts Used:
Evaporator Fan Motor
  • Glenn from Lincoln, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
motor makin load hum
Part came in a couple of days, very fast delivery. Read how other people installed. Only drawback was the youtube video was not available. Thanks again!
Parts Used:
Evaporator Fan Motor
  • paul from renfrew, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Sides of old shelf cracked
Pulled out old shelf and put in new one. However the new shelf is too narrow and will break at some point just like the old one. Apparently no way to fix this issue.
Parts Used:
Vegetable Drawer Shelf Frame
  • Daniel from Carlsbad, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Missing a Shelf Guard on freezer door
Simply "popped" the guard into place...a very basic fix. Thank you so much for your customer service (the lady who waited on me was awesome, shipping was super fast, and it was the "Correct" part)...singularly, one of the best transactions I have had in a very long time...kudos to you. Definitely will use your site again.
Parts Used:
Door Shelf Bar
  • Patricia from Hampton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
not cooling
refrigerator was not cooling. with new fan the refrigerator is working so well I had to turn it down to "1" to get the temerature right.
Parts Used:
Condenser Fan Motor
  • cyril from holden, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken freezer door shelves
Just popped the new ones in.
Parts Used:
Door Shelf Bar
  • Richard from Stockton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Evaporator fan motor making loud noise
Watched video repair by Hotpoint , Everything went like clockwork and was a total success. Repair took exactly 25 minutes.
Parts Used:
Evaporator Fan Motor
  • John from Bedford Hills, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Loud Noise
I had already ordered a replacement evaporator motor from another vendor. I ordered the evaporator fan blade, compression ring and rubber grommets from PartSelect. Apparently this is a pretty common issue with top-freezer refrigerators. Obtaining these parts and possessing the few tools needed saved me at least $100 over having someone else perform the repair. I will further use PartSelect when ordering parts for my other appliances. Thank you.
Parts Used:
Evaporator Fan Blade Compression Ring Evaporator Fan Grommet - Red
  • Christopher from Stephens City, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dropped shelf while cleaning
shippment on time as promised, unpacked and installed by putting into place
Parts Used:
Crisper Glass Shelf
  • Richard from Zephryhills, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The condenser fan was really noisy
I did as the youtube video instructed. Very easy to install and fixed the problem.
Parts Used:
Condenser Fan Motor Evaporator Fan Grommet - Red
  • David from Fairchild AFB, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Fan was making a VERY LOUD noise
First I looked at the video on changing out the fan.Made a lot of difference. Everything was covered and made it simple. Wish I had gotten two grommets but the back one was in good shape and worked fine. My hearing isn't great but now I can't even hear the thing run unless the freezer door is open. The shipping was great! You sent it out immediately and in a few days it was here.
Parts Used:
Evaporator Fan Motor Evaporator Fan Grommet - Red
  • Kenneth from Trinity, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Hinge between upper and lower door had rusted through,
Removed upper door w/ 5/16 nut driver, did same with center hinge and pin assembly. Removed old hinge pin assembly and shim. Installed new shim and hinge pin assembly, w/ spacer, had best luck putting hinge pin assembly in place in door and setting n place prior to tightening. Re-installed top hinge and job was complete.
Parts Used:
Door Hinge Kit, White Spacer - Freezer Door SHIM HINGE CTR
  • Sid from West Columbia, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
intermittent vibrating noise in the freezer
emptied the freezer compartment, unfastened the air column panel, then four small bolts to remove the back panel in the freezer, unplugged the motor, unscrewed the motor, installed all in te reverse order and had the compartment refilled and running again in less than a half hour.
Parts Used:
Evaporator Fan Blade Evaporator Fan Motor
  • Richard from Zephryhills, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 37511KBSERWW
181 - 195 of 241