Ice Bin Auger Drum 4388736

Hi John, Thank you for the question.This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts. The plastic Auger is no longer made. Hope this helps!

Hello Doug, thank you for inquiring. If the recently installed ice bucket is not properly seated then this will occur.

Hello Robert, Thank you for the question. I suggest replacing the Dispenser Solenoid, PartSelect Number PS11743220. This Solenoid helps the bucket switch from cube to crushed. Hope this helps!

Hello Willa, Thank you for the question.I suggest checking the wire harness in the bottom of the door, make sure there is no damage or that it has not come unplugged. Next you can push and hold the Unlock button of the dispenser for a few seconds to see if it resets. You can also test the Micro switch in the dispenser, PartSelect Number PS11738948. You can use a Multi Meter to test for continuity, it should read closed. If you do not have a meter you can swap the water dispenser switch to the icemaker side to see if it works. If not you may need to replace or test the Auger Motor, Part Number: PS11752718. Hope this helps!

Hello Pauline, thank you for your question. I would recommend checking the icemaker and the water line that brings water to the icemaker for holes, or leaks. You can also check the amount of water coming into the icemaker, if there is too much water coming in from the water valve the icemaker will overflow and the water freeze up on the door. I hope this helps!

Hi Sharon, Thank you for your question. Unfortunately this part is only made out of the plastic material. I hope that helps. Good luck with your repair.

Hi Donna, Thank you for your inquiry. For information on installing the part, there is a video on our website, just under the photo of the part. Under the video you will also find installation instructions that customers have left on how they installed the part. I hope this helps with the repair. Thank you and have a great day!

Hi Darlene, Thank you for your question. The auger actually just pushes your ice to your crusher. I would suggest taking a look inside of your crusher assembly to see if any of the little blades are broken at all or seized. I hope that helps. Good luck with your repair.

Hello Michael, thank you for your question. The bucket and auger assembly is Part Number: PS11752583. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Lori, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS372186. Hope this helps!