GE/GE_Thumb/00004788i01.gif
See part 36 in the diagram
Replacing your General Electric Refrigerator Dispenser Door Solenoid Kit play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dispenser Door Solenoid Kit

★★★★★
★★★★★
5 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS304961
Manufacturer Part Number WR62X107
Manufactured by GE
Product Description

Dispenser Door Solenoid Kit Specifications

This kit is used on the water/ice dispenser door. This part allows water/ice to be dispensed on demand.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Noisy | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WR62X107 replaces these:
AP2071983, 305701, WR62X0070, WR62X0071, WR62X0078, WR62X0094, WR62X0107, WR62X70, WR62X71, WR62X78, WR62X94
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Joe
    December 17, 2018
    The control lever on the water/ice dispenser dispenses water and ice cubes but does not work on the crushed ice setting. What part should i replace?Thanks.
    For model number TFX25PPBAWW
    Hello Joe,thank you for your question. Based on the information I have found, it sounds like this problem is caused because of a locked shifter. You will need to remove the ice bucket assembly from the refrigerator and empty the ice into a container and place it back in the freezer. Rinse the the bucket with warm water all around the dispensing end and allow the bucket to dry. After the bucket has dried place the ice back in it and install it back in the refrigerator. If that doesn't fix the issue, you would want to test the PartSelect Number: PS11699580 - Crushed/Cubed Ice Solenoid Kit. I hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Mark
    October 21, 2019
    Our GE profile performance refrigerator model tfx26ppdabb water dispenser continues to dispense water for 11 seconds after releasing button ice works fine. New GE mwf filter installed.
    For model number TFX26PPDABB
    Good Day Mark. Thank you for your question in regards to your unit (Model Number TFX26PPDABB). Based on our research you may need to replace your Dispenser Control Board (PartSelect Number PS304236). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jack
    October 29, 2019
    Does not switch from crushed ice to cubes. I replaced the solenoid behind the ice maker. No change. Very noisy when i am getting ice through the door. No problem with water dispensing and no noise .
    For model number PSS25NGMD CC
    Hello Jack, thank you for your question. If the Crushed/Cubed Ice Solenoid Kit PartSelect Number: PS11699580 has been replaced and the unit is still not dispensing ice, we would recommend testing/replacing the auger motor, PartSelect Number: PS8259956 micro switch, and Dispenser Door Solenoid Assembly Part #: PS1483583. If those parts are tested and are fine, the issue might be the dispenser board which has been discontinued. I hope this helps.

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Gene
    September 18, 2017
    I do not get water from the water dispenser. I replaced the dispenser control board but that did not help. I get water to the ice maker which continues to make ice but no water. I have also replaced the filter.
    For model number TPS24BPDA BS
    Hi Gene, Thank you for your question. I would suggest testing your water inlet valve. Your valve has two solenoids on it. One for the ice maker and one for the water dispenser. It may be that your water dispenser solenoid has stopped working. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Pat
    June 6, 2019
    I cannot get water, ice or crushed ice to dispense from the door of my refrigerator. It just stopped. What would you suggest that I do? Thanks.
    For model number ERS2022DABB
    Hi Pat, Thank you for your question. If ice and water are not being dispensed, the issue could be the dispenser switch, but there are some other parts that you will need to check to see which one is causing the issue. You will also need to check the ice maker switch, the actuator pad, the ice maker, the dispenser door assembly or flapper, the plastic tubing, the water inlet valve and the dispenser door solenoid. I hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Michael
    November 21, 2017
    Water drips through when not in use.
    For model number Tfx20JRBCWW
    Hi Michael, Thank you for the question. This sounds like the Dual Inlet Water Valve,PartSelect Number PS901314 is "stuck" open on the dispenser side and allowing water to flow through causing the drip. You can also test the Dispenser Switch,PartSelect Number PS296301 for continuity with a Multi Meter. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Charles
    December 11, 2019
    My ice dispenser sticks and continues to spew ice out the freezer door until you open the door to get it to stop. A few years ago I replace the control board, but was wondering if the solenoid is what to look at now.
    For model number TFX25PRYFWW
    Hello Charles, Thank you for the question. In most cases the Dispenser Door Assembly or Flapper, PartSelect Number PS964304 is replaced when the dispenser is dispensing to much ice. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Charles
    December 12, 2019
    I asked a question yesterday and was happy to receive an answer today, however I am not clear on how the flapper door is the correct solution. My ice dispenser continues to operate even after you have removed the pressure from the dispenser pad and the only way it stopped was to open the door which I believe breaks the electric circuit. Therefore I think that since the flapper is not electric in itself there must be either a solenoid or micro switch that is sticking. Could you please respond again thanks
    For model number TFX25PRYFWW
    Hi Charles, at that point you would have to take replacing the solenoid, or you can test it with a multi-meter. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Brian
    June 26, 2021
    Does the solenoid kit fix the delayed water stopping after switch has been de-selected?
    For model number TFX20JRBCWW
    Hello Brain, Thank you for the question. If the Dispenser Door Solenoid is defective it may not close properly and stop the water from dispensing properly. We hope this helps!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your General Electric Refrigerator Dispenser Door Solenoid Kit

      Replacing your General Electric Refrigerator Dispenser Door Solenoid Kit play video
      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 12 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      solenoid opened ice trap door at random
      Unplug the refrigerator
      Front cover of ice dispenser snaps off. Remove the 4 screws from the ice chute. Unplug the control module that opens the ice chute. Leave hanging while removing the 4 screws that hold the solenoid in place.(one is a ground wire...note location before taking apart). Unplug the two wires to the solenoid.
      To install the new solenoid put the plunger in place and at the same time hook on the trip arm of the clapper door of the ice chute. Plug in the two wires to the new solenoid
      Replace the 4 screws.
      Plug in the Control modules and screw back in place
      Plug in the refrigerator. Do a trial test.
      Replace the cover
      • Betty from Ten Mile, TN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      40 of 46 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The old Solenoid was rusted and made a loud noise, also kept the trap door open.
      First I removed the face plate by lightly prying . Once removed noticed 4 screws. Removing the screws allows you to gain access to the two plugs, one for the solenoid and the other for the switch that energizes the solenoid . Unplug the connectors and carefully lower the piece enough to reach the 3 screws that hold the solenoid in place. The 4th screw in the center at the bottom of the solenoid is the ground wire. If it is rusted like mine was just re-attatch it to one of the solenoids holding screw. It must be grounded!
      Just re-assemble, just dont forget to replug the connectors. Also a little hint, If you open the freezer door a little you wont trigger the solenoid.
      • Kevin from West Palm Beach, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      24 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice trap door would not open
      1. Unplug refrigerator or flip breaker to kill power to the refrigerator.
      2. With hands, gently pull the bottom lip of the 3" X 11" face plate panel above the dispenser head.
      3. Remove the 4 screws that are under the removed panel.
      4. Tip the assemby down to reveal 2 plugs.
      5. Gently pull the 2 plugs to disconnect.
      6. Open the assembly to reveal the solenoid.
      7. There are 3 screws at the base of the solenoid. The center screw attaches to the green ground wire.
      8. Remove the three screws.
      9. Observe: The bracket at the top of the solenoid unit tucks behind a 4th screw above the solenoid. You may need to loosen this screw to relesae the solenoid.
      10.Unplug the yellow and red connector to the solenoid. It should not be totally free to remove.
      11. Put the plunger into the solenoid. Note that the plunger has an opening to insert the white plastic trigger for the trap door. Make sure the trigger is inserted into this opening before reassembling.
      12. Plug the yellow and red connector into the new solenoid.
      13. Position the new solenoid to match the screw holes. The bracket at the top of the solenoid tucks under the 4th screw. Tighten as necessary.
      14. Insert the green ground wire into the middle screw hole at the base of the solenoid and tighten.
      15. Insert the two screws to either side of the ground wire and tighten.
      16. Gently reconnect the two plugs.
      17. Tip the assembly back into place making sure the trap door and hoses are lined up correctly.
      18. Replace the 4 screws.
      19. Snap the face plate back into place.
      20. Turn on the power and give it a try!

      I used other instructions provided by customers on the website. They were very useful.

      This is the second time we replaced this unit. The first replacement failed within the one-year warranty period. I called customer service and they had a replacement part and refund for the previous part on its way immediately. Excellent service!
      • Susan from Polson, MT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      6 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Solenoid was hanging creating an awful noise when dispensing ice
      Unplugged the refrigerator. Removed the panel to the ice/water dispenser. Removed the cover that displays ice type/water and light. Removed the 4 screws holding the cover. Unplugged the wiring harness to the cover which allowed easy access to the two electrical connections to the solenoid.
      Removed the three bottem screws holding the solenoid in place. Loosened the top screw ( do not remove completely) and the solenoid slide down. Removed the solenoid arm that hangs on door latch.
      Install hang solenoid arm on door latch; slide solenoid up under top screw. Install bottom 3 screws to hold solenoid in place then tighten top screw. Reattach electrical lines to solenoid then plug wiring harness back into cover. Install 4 screws holding panel in place. Re-install two remaining covers.
      • Christopher from Acworth, GA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice dispensing door would not function
      I replaced the control board and the solenoid. This was very simple and easy to do. Make sure the power is disconneted before starting. I then removed the accuator pad and holder. Removed the face plate by simply pulling on it. I then removed the four screws holding the control board unit. I unplugged the unite by pulling the block connector on the left side. I then marked on paper the connections to the solenoid and unplugged it. I removed the three screws holding the solenoid the removed it. When installing the new solenoid make certain the rod to the dispenser is put into the solenoid plunger. Then replace the three screws and plug the wires back in using the connections written down on paper. I then removed the two philips screws on the control unit hold down bracket in order to remove the controll board. After removing the screws and the hold down bracket, I pulled the old board out and put the new one in. I then reinstalled the unit, faceplate, and accuator pad. I then turned the power back on and tested it. Worked like new, saving a lot of money...
      Other Parts Used:
      Actuator Pad
      • Robert from Philadelphia, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      water dispenser not working
      I replaced the water solenoid kit,control board and a broken dispenser assembly crank.My repair went well, parts came on time,I watched an R&R video on youtube provided by PartSelect and finished the job in ten minutes. I am one happy do it yourself-er customer.
      Other Parts Used:
      Dispenser Control Board - 2 Slide Switches Dispenser Assembly Crank
      • Michael from Olney, MD
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      4 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice Dispenser Door does not close properly
      Followed previous description, when the face plate came off, parts appeared straight forward. I turned off the refringerator at the circuit breaker, so didn't have to move it.
      Other Parts Used:
      Ice Dispenser Door Spring
      • Toan from Charlotte, NC
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      4 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The Ice Dispensing door would not open
      1. Either unplug the refrigerator or shut the circuit breaker off for the outlet that it's plugged into. 2. Pull off the front panel (approx 3" x 8") 3. Remove the 4 philips head screws. 4. Pull the unit toward you and down to expose the solenoid. 5. Unplug the plug on the left side of the control board. 6. Write down the color of the two wires that are attached to the solenoid and remove them. 7. Remove the 3 screws on the bottom of the solenoide. The center screw will have a green ground wire attached to it. 8. There is also a screw at the top of the solenoid that you may have to loosen a bit to remove the solenoid. Be sure to remove the old plunger too. 9. Just reverse the process to install the new Solenoid. Turn the power back on and try it. This however did not fix my problem, I had to order the control board and install it. Then, everything worked fine. I ordered the Actuator Pad just to have it on hand. My refrigerator is 14 yrs. old.
      Other Parts Used:
      Actuator Pad
      • Steven from Wildwood, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      2 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The Refrigerator ran all the time
      I discovered that the ice gate on the ice dispencer stayed open all the time. I looked at your online blue prints and found the Ice gate solenoid and found that ours was bad and not working. I ordered the part and in a couple days was able to replace the old one with the new one. The refrigerator stopped running all the time and this will in the long run save on our power bill. This is the greatest way to save on repair cost because this repair would have cost $100.00 for a repair man to do the same work. Money that I would rather spend on something fun. So thanks PartSelect.com. You made it easy to repair my refrigerator.
      Ken Willis
      • Ken from Cottondale, AL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers
      2 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice maker would not turn off
      Ice maker had to be removed from refrigerator, solenoid removed with four screws. Fairly easy repair and the part was delivered the day after it was ordered.. superfast repair.
      • Michael from Levittown, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      5 Reviews
      4.0
      Filter By Rating:
      • 5 Stars
        2
      • 4 Stars
        1
      • 3 Stars
        2
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS304961
          Manufacturer Part Number: WR62X107
          Brand
          Model Number
          Description
          Kenmore
          36350221000
          Refrigerator
          Kenmore
          36350222000
          Refrigerator
          Kenmore
          36350227000
          Refrigerator
          Kenmore
          36350232000
          Refrigerator
          Kenmore
          36350237000
          Refrigerator
          Kenmore
          36350242000
          Refrigerator
          Kenmore
          36350247000
          Refrigerator
          Kenmore
          36350622000
          Refrigerator
          Kenmore
          36350627000
          Refrigerator
          Kenmore
          36357552790
          Refrigerator
          Kenmore
          36357552791
          Refrigerator
          Kenmore
          36357557790
          Refrigerator
          Kenmore
          36357557791
          Refrigerator
          Kenmore
          36358062890
          Refrigerator
          Kenmore
          36358062891
          Refrigerator
          Kenmore
          36358062892
          Refrigerator
          Kenmore
          36358062893
          Refrigerator
          Kenmore
          36358062894
          Refrigerator
          Kenmore
          36358062896
          Refrigerator
          Kenmore
          36358062897
          Refrigerator
          Kenmore
          36358067890
          Refrigerator
          Kenmore
          36358067891
          Refrigerator
          Kenmore
          36358067892
          Refrigerator
          Kenmore
          36358067893
          Refrigerator
          Kenmore
          36358067894
          Refrigerator
          Kenmore
          36358067897
          Refrigerator
          Kenmore
          36358072891
          Refrigerator
          Kenmore
          36358072892
          Refrigerator
          Kenmore
          36358072893
          Refrigerator - Kenmore Refrigerator Model 363.58072893 (36358072893, 363 58072893) Parts
          Kenmore
          36358072894
          Refrigerator

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service