GE/GE_Thumb/00121509i01.gif
See part 74 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

FUSE

★★★★★
★★★★★
18 Reviews
$8.91   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

 Fits your JVM1870SK03 Microwave!
 Fits your JVM1870SK03 Microwave!
PartSelect Number PS1481237
Manufacturer Part Number WB27X10928
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on | Touchpad does not respond
This part works with the following products:
Microwave, Microwave Oven Combo, Range, Wall Oven.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB27X10928 replaces these:
AP3994062, 1262970, WB27X0713, WB27X10114, WB27X10247, WB27X10288, WB27X10388, WB27X10474, WB27X1077, WB27X1159, WB27X713
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Sue
    September 5, 2019
    Microwave only comes on for 8 seconds then shuts off.. pf is on control panel. could it be fuse inside microwave?
    For model number JES1451DS1WW
    Hello Sue, thank you for your question. The PF indicates a power failure within the unit. We would recommend testing the following parts for continuity. THERMOSTAT Part Number: WB24X10163, THERMOSTAT Part Number: WB27X11100, and FUSE Part Number: WB27X10928. If those parts are fine, the issue is probably with the main control board. I hope this helps!

    8 people found this helpful.

    Was this helpful?
    Thank you for voting!
    David
    July 16, 2021
    The microwave just died and has no light or display. Power is good at the outlet. I suspect the fuse but not sure. Do you have any replacement instructions for fuse replacement?
    For model number JVM6175SK3SS
    Hello David, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. We hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Irene
    4 days ago
    The microwave above my stove has worked perfectly. (7yrs). I always use my night light in the evening. A few days ago, I went to turn off the light & the touch pad did not work to shut it off. With all other touch pad keys working, I had to get up on a ladder & pull the plug. We replaced the bulb with the same exact one & it worked for about a week & now the same problem is back. The light will not go off nor respond to the touch pad. We took the bulb out because obviously we needed to use the microwave. Can you give us an idea of what we should look for? Thanks
    For model number PVM9179DFBB
    Hello Irene, Thank you for the question. We suggest checking or replacing the Light Socket for the bulb. Make sure there are no lose or damaged wires causing a bad connection. If the Socket is good, you may have a defective Touch Pad. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.6 / 5.0, 11 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Microwave completely stopped working
      Turned out the issue was easily solved by replacing a single, inexpensive fuse.

      First off, UNPLUG THE MICROWAVE.

      The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
      • Kim from Cliffside Park, NJ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WB27X10928
      856 of 1098 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Microwave not heating
      Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels.
      • Steven from Manassas, VA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      162 of 259 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Some smuck put a metal object in company microwave
      found fuse blown and heat damage to TCO sensor.
      • Jacob from Brewster, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WB27X10985, WB27X10928
      71 of 129 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I diagnosed the problem incorrectly: based on a previous repair.
      The old fuse is perfectly good. The new ones arrived within a day.
      • Ralph from Brandon, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WB27X10928
      59 of 125 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      appliance stopped working -- no readout on screen
      1. turned off electricity -- unplugged the unit 2. removed 3 screws on top of top vent, removed vent screen then I located the little white cylindrical fuse and popped it out with a table knife. Then I popped in the new fuse. Replaced the vent screen and screws -- plugged in the appliance and it is working again.
      • Carolyn from ARMONK, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WB27X10928
      11 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Suddenly had no heat. All else worked fine. A deep odd hum sound.
      This did not fix my problem. I've ordered a new microwave.

      First off, UNPLUG THE MICROWAVE.

      The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
      • Katherine from WILLIAMSTOWN, NJ
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WB27X10928
      10 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Touch pad failed to respond to any programming effort
      Went to onlin source, found a couple youtube videos then went to the GE site which had a not-too-easy that find trouble shooting guide. It was extremely helpful as it described a fuse as a fix 80% of the time for touch paid failure. I really didn't believe it would b a fuse, but it was the cheapest fix, $8. I got the fuse and was surprised to fine there are two of them on this model. I took a guess and replaced the top one ( neither fuse was black or burned to indicate a failure but the top one was a bit mor greyish). put it all back together and it works fine.
      • charles from SARASOTA, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WB27X10928
      10 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      microwave stopped working
      took off upper grille and touch pad and removed the old line fuse and replaced with a new fuse ...turned on it is working fine...sources of help: UTube and GE manuel
      • John from OWOSSO, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WB27X10928
      9 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Microwave was accidentally overheated and all power was lost.
      Since I didn't know if it was the current fuse or the flame sensor, I ordered both parts, and, I had to order the tamper proof torx bits needed to remove the microwave cover ($7.45 on Amazon). Once the cover was off the unit, both parts were easily accessible on top of the oven and were replaced in only a couple of minutes.
      • Charles from PAWLEYS ISL, SC
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        WB24X26575, WB27X10928
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      MICROWAVE WAS NOT HEATING THE FOOD
      So my microwave was turning on and operating but nothing would get hot or even Luke warm. After watching several online videos on the problem I replaced the line fuse, diode, and the magnetron. I figured why waste time and just do all 3 while I have the thing apart. I discharged the capacitor with a light bulb first before doing anything. Also had to pop the safety pins on the outside screws to take the metal housing off the microwave. Then Wallah! Everything is working and the food or liquid is hotter than it ever was. The only think that bothers me a little bit is that after the microwave shuts off, I can hear a few crackles or faint pops for about 5 seconds. I wonder if this is anything to worry about. Comments appreciated.
      • Daryl from Salado, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Wrench (Adjustable)
      • Parts Used:
        WB27X10930, WB27X10928
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      18 Reviews
      3.8
      Filter By Rating:
      • 5 Stars
        10
      • 4 Stars
        3
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        4
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS1481237
      Manufacturer Part Number: WB27X10928
      Brand
      Model Number
      Description
      Kenmore
      36362702200
      Microwave
      Kenmore
      36362709200
      Microwave
      Kenmore
      36362709300
      Microwave
      Kenmore
      91141485890
      Microwave Oven Combo
      Kenmore
      91141485991
      Microwave Oven Combo
      Kenmore
      91141485992
      Microwave Oven Combo
      Kenmore
      91141485993
      Microwave Oven Combo
      Kenmore
      91141485994
      Microwave Oven Combo
      Kenmore
      91141485995
      Microwave Oven Combo
      Kenmore
      91141485996
      Microwave Oven Combo
      Kenmore
      91141489890
      Microwave Oven Combo
      Kenmore
      91141489991
      Microwave Oven Combo
      Kenmore
      91141489992
      Microwave Oven Combo
      Kenmore
      91141489993
      Microwave Oven Combo
      Kenmore
      91141489994
      Microwave Oven Combo
      Kenmore
      91141489995
      Microwave Oven Combo
      Kenmore
      91141489996
      Microwave Oven Combo
      Kenmore
      91147692100
      Microwave Oven Combo
      Kenmore
      91147792200
      Microwave Oven Combo
      Kenmore
      91147792201
      Microwave Oven Combo
      Kenmore
      91147792202
      Microwave Oven Combo
      Kenmore
      91147793200
      Microwave Oven Combo
      Kenmore
      91147793201
      Microwave Oven Combo
      Kenmore
      91147793202
      Microwave Oven Combo
      Kenmore
      91147794200
      Microwave Oven Combo
      Kenmore
      91147794201
      Microwave Oven Combo
      Kenmore
      91147794202
      Microwave Oven Combo
      Kenmore
      91147799200
      Microwave Oven Combo
      Kenmore
      91147799201
      Microwave Oven Combo
      Kenmore
      91147799202
      Microwave Oven Combo

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service