EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

36363672201 Kenmore Microwave - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Halogen Light Bulb - 120V 20W – Part Number: WB25X10019
$25.24
In Stock
Halogen Light Bulb - 120V 20W
★★★★★
★★★★★
(44)
Part #WB25X10019
This light bulb is located on the inside of your microwave. The bulb is behind the top grill. It will need to be replaced when it has burnt out and no longer works. Unplug the unit before beginning this repair. Remove the top grill of your microwave, use your screwdriver to open the light socket, scrape off any silicone holding the bulb in place, clean the area of any oil and dirt, insert the new bulb into the socket without touching the bulb, slide the holder back into place, line up the tabs on top of the metal plate, and secure the holder back into place.
Microwave Fuse – Part Number: WB27X10928
$21.81
In Stock
Microwave Fuse
★★★★★
★★★★★
(21)
Part #WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Glass Cooking Tray – Part Number: WB49X10129
$86.96
On Order
Glass Cooking Tray
★★★★★
★★★★★
(30)
Part #WB49X10129
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
Microwave Holder – Part Number: WB02X10750
$18.29
On Order
Microwave Holder
★★★★★
★★★★★
(10)
Part #WB02X10750
Sold Individually.
Door Latch Assembly – Part Number: WB10X10021
$28.42
Special Order
Door Latch Assembly
★★★★★
★★★★★
(20)
Part #WB10X10021
This part is electrically designed for securing the door of the microwave while it’s in use.
Mounting Plate Assembly – Part Number: WB56X35363
$25.24
In Stock
Mounting Plate Assembly
Part #WB56X35363
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed to hold it in place. You will need a screwdriver in order to secure the mounting bracket into place. Part has been substituted. Part is no longer a U-shaped bracket, it is now a flat mounting plate and will function the same.
Diode Cable – Part Number: WB27X10037
$41.67
In Stock
Diode Cable
★★★★★
★★★★★
(3)
Part #WB27X10037
This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical faults or power irregularities occur. Proper application should be verified before installation.
FASTENER – Part Number: WB2X9052
No Longer Available
FASTENER
Part #WB2X9052
Grille Clip – Part Number: WB06X10320
No Longer Available
Grille Clip
★★★★★
★★★★★
(3)
Part #WB06X10320
Sold individually.
Magnetron – Part Number: 6324W1A001L
$130.68
In Stock
Magnetron
★★★★★
★★★★★
(8)
Part #6324W1A001L
This magnetron in your microwave creates the radiation needed for cooking or warming your food. It is located inside the main cavity, typically near the transformer or waveguide. When the magnetron becomes defective, your food may not heat up properly or heat up at all. Additionally, buzzing or humming sounds may be noticeable while the microwave is in operation. With a malfunctioning magnetron, your microwave loses its primary function. To remove it, you first need to unplug your microwave from its outlet. Before touching any components, discharge the capacitor by placing a screwdriver, with an insulated handle, across the two terminals of the capacitor. Once the capacitor is discharged, replace the current magnetron by disconnecting it from any wires and removing any mounting screws or clips. This magnetron is sold individually and is supplied directly from the original equipment manufacturer.
Door Choke Cover – Part Number: WB55X10428
No Longer Available
Metal Shelf – Part Number: WB48X10017
No Longer Available

Manuals & Care Guides for 36363672201

Click to download

Common Symptoms of the 36363672201

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave completely stopped working
968 of 1266 people found this instruction helpful.
  • Kim from Cliffside Park, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Was this helpful?
Thank you for voting!
Under the vent light bulbs needed to be replaced
66 of 87 people found this instruction helpful.
  • Robert from Naples, ME
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it!
Was this helpful?
Thank you for voting!
One of the two plastic latches broke off, disabling my microwave
55 of 73 people found this instruction helpful.
  • Dennis S. from Fremont, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I have a GE Advantium/micorwave oven. It is the model that has the hinges on the side, NOT the bottom. First, removing the door is necessary. The grill has to be removed first, then the door lifts right out. Next the plastic backing on the door has to be very carfully taken off to expose where the new latch has to be placed. Use a fla t screw driver or putty knife to go around the permiter releasing the internal, unseen, plastic catches that hold it on. This should be done carefully, to avoid breaking the catches that you can't see. After the plastic is mostly removed putting in the spring is not too difficult, but a second set of hands is almost manditory.
Was this helpful?
Thank you for voting!