This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair.
NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on | Touchpad does not respond
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian B - March 9, 2022
Verified Purchase
Little fuse saved a lot of money
The part came in great condition and had our Advantium oven back in working condition fast!
★★★★★
★★★★★
Mary A - February 20, 2021
Verified Purchase
Easiest Repair
This fuse was the fix for the microwave to stop working. My 15 year old grandson did all the work as he loves “fixing” things for his grandma. Took about an hour with cleaning for the microwave to be work again.
★★★★★
★★★★★
EDWARD B - January 12, 2021
Verified Purchase
FAIRLY EASY REPAIR, A LITTLE DIFFICULT TO GET TO WITHOUT LONG NEEDLE NOSE PLIERS
THE PART ARRIVED QUICKLY, THE DIAGNOSTICS WERE CORRECT, WORKING LIKE A CHARM.
★★★★★
★★★★★
Laura S - July 15, 2020
Verified Purchase
Not the right part
I entered my model number info to match to a part. It was wrong. Wasted my money and time.
★★★★★
★★★★★
Roland H - November 5, 2019
Verified Purchase
Easy repair
Tiny fuse saved me $85.00 repair
★★★★★
★★★★★
Daryl M - September 28, 2019
Verified Purchase
Easy installation and working perfectly
So my microwave was turning on and operating but nothing would get hot or even Luke warm. After watching several online videos on the problem I replaced the line fuse, diode, and the magnetron. I figured why waste time and just do all 3 while I have the thing apart. Wallah! Everything is working and the food or liquid is hotter than it ever was. The only think that bothers me a little bit is that after the microwave shuts off, I can hear a few crackles or faint pops for about 5 seconds. I wonder if this is anything to worry about. Comments appreciated.
★★★★★
★★★★★
Marty S - September 8, 2019
Verified Purchase
Good company
I rated the service and advice 4 stars because the part came quickly and the directions as how to install the part were clear and easy to follow..However, the part I replaced was not the problem. I thought the shipping cost was too high.
★★★★★
★★★★★
Thomas K - January 20, 2019
Verified Purchase
Exactly correct part
It was an multipart order. I also picked up a thermo fuse for the microwave. You guys wanted too much for the HVD, I went to the OEM for that component. I suggest price matching guarantee. BTW, the fuse blew after 10 minutes, there was another undiagnosed fault. Going to Ace Hdwr for fuses now.
★★★★★
★★★★★
Katherine M - December 24, 2018
Verified Purchase
Didn't Do the Trick...
When I removed the old fuse, which was extremely easy on my year 2000 unit, and it was black. I figured for sure it was the problem, but unfortunately it was not. I'm waiting on the arrival of my new microwave. I ordered one almost identical. This unit worked with no problem for 18 years. Never cost me a penny, and as I'm waiting for the new one, my exhaust fan still works, the task light over the stove works. I plan to save parts and the fuse I purchased before disposing of it.
★★★★★
★★★★★
Jeff E - November 27, 2018
Verified Purchase
Great part!
Great service, right part. Spent little money to confirm other problems.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 18 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Frost build up on bottom to ice bin and delivery chute in door creating ice blockage
Remove the ice bin. Turn the ice maker selection to "OFF" Use small flat blade screwdriver to open the plastic ears on the electic plug in connectiion Use #2 Phillips screwdriver to remove the screw on the front left side of the ice maker Pull the ice maker forward until free of the two studs in the left side rear of t
... Read morehe freezer wall Check to see if the supplied water chute is the correct size for your application, if not remove the water chute from the old ice maker and place it on the new one. Place the new ice maker in the freezer connecting the slots on the left read with the studs on the left wall NOTE; IF THE ICE MAKER DOES NOT APPEAR TO BE LEVEL HORIZONTALLY REMOVE IT AND CAREFULLY REINSTALL IT TO ACHIEVE LEVEL NOTE: ENSURE THE WATER DELIVERY TUBE RESTS IN THE RECEIVER TRAY Reconnect the electrical plug ( needle nose pliers may be helpful in aligning the male plug with the female plug) Move the selector from "OFF" to "ON" Replace the ice bin and close the freezer door
Read less
Ronald from PONCA CITY, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave does not have power at all, though outlet has power
unplugged power cable / unhooked front vent / unscrew the monitor panel / slide up to dislodge / take the fuse out and put in the new one in / fuse is located right in front of monitor panel once its open might be covered by wirings / you can unpin the cables from the panel to make it easier for you just make sure to put it back properly
... Read moreor you can have somebody hold the panel for you. Installing the fuse is easy waiting for the parts is crazy......
Read less
Ronie from BRIARWOOD, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not heat
-unplug -remove top and front covers -unplug wire connectors from heating assembly -remove heating assembly from metal stand and push out of the way -remove metal stand from dry -pull out heating assembly -install new one in reserve order
Kip from POWELL, OH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave would run when door was opened, tripped breaker, wouldn't run at times, door opening and close would help/hurt operation
The breaker was tripped but fuse was ok on testing. I kept the fuse for possible future repairs. To access door switches and fuse on this model JVM1850CF001, remove 2 phillips screws at top. Then slide the grill to the left (toward hinges) about 1 cm and it should easily come off forwardly. Remove phillips screw underneath grill attac
... Read morehing the main panel. Lift the panel 1 cm and it will easily come off forwardly - I let it hang by the electrical cords. Now you can see/discharge capacitor(s). Remove 2 star screws inside door to loosen/remove/access door switch frame. 3 switches are held in the frame by plastic tabs - one tab per switch. One is primary and 2 are secondary door switches. I removed each switch one at a time by lifting tab, pulled off the electrical connector and filed the male metal connection on each switch. I replaced the switch with a loose button (loose and didn't click as crisply compared to the other switches) with a new secondary door switch. It was the lower secondary switch. Worked like a charm after that.
One small Phillips screwdriver and one fuse puller (I used cord). Unplug unit. Remove the two screws on the vent face plate. Remove the one screw on the panel assembly. Gently let hang. Pull the fuse located on the upper left wall. Replace fuse. Reassemble.
Frank from VIPER, KY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave was accidentally overheated and all power was lost.
Since I didn't know if it was the current fuse or the flame sensor, I ordered both parts, and, I had to order the tamper proof torx bits needed to remove the microwave cover ($7.45 on Amazon). Once the cover was off the unit, both parts were easily accessible on top of the oven and were replaced in only a couple of minutes.
Microwave with no heat. Removed casing and checked low voltage side from the fuse through all the microswitches to the primary side of the transformer, all good. Checked HV diode good. Checked secondary side of transformer, good. Checked capacitor, good. Even though the Magnatron electrically checked out good, it had a cracked magnet. Rep
... Read morelaced the magnatron and we have heat again!
So my microwave was turning on and operating but nothing would get hot or even Luke warm. After watching several online videos on the problem I replaced the line fuse, diode, and the magnetron. I figured why waste time and just do all 3 while I have the thing apart. I discharged the capacitor with a light bulb first before doing anything.
... Read more Also had to pop the safety pins on the outside screws to take the metal housing off the microwave. Then Wallah! Everything is working and the food or liquid is hotter than it ever was. The only think that bothers me a little bit is that after the microwave shuts off, I can hear a few crackles or faint pops for about 5 seconds. I wonder if this is anything to worry about. Comments appreciated.
Suddenly had no heat. All else worked fine. A deep odd hum sound.
This did not fix my problem. I've ordered a new microwave.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove anoth
... Read moreer screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
Katherine from WILLIAMSTOWN, NJ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
16 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave stopped working
took off upper grille and touch pad and removed the old line fuse and replaced with a new fuse ...turned on it is working fine...sources of help: UTube and GE manuel
John from OWOSSO, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
13 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
37 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
July 16, 2021
The microwave just died and has no light or display. Power is good at the outlet. I suspect the fuse but not sure. Do you have any replacement instructions for fuse replacement?
For model number JVM6175SK3SS
Hello David, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. We hope this helps!
25 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
January 5, 2022
My microwave comes on but does not heat.
For model number JVM1440BD 003
Hi Mary,
Thank you for your question. If your microwave is not heating, there are some parts that you will need to check to see which one is causing the issue. You will need to check the fuse, the door switches, the high voltage diode, the magnetron, the hood thermostat and the thermal fuse. We have included a link that you may reference on how check these parts. We hope this helps! Good luck with the repair!
Microwave only comes on for 8 seconds then shuts off.. pf is on control panel. could it be fuse inside microwave?
For model number JES1451DS1WW
Hello Sue, thank you for your question. The PF indicates a power failure within the unit. We would recommend testing the following parts for continuity. THERMOSTAT Part Number: WB24X10163, THERMOSTAT Part Number: WB27X11100, and FUSE Part Number: WB27X10928. If those parts are fine, the issue is probably with the main control board. I hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
December 18, 2021
How do I and where is the fuse located
For model number JE1590SH01
Hi Tom,
Thank you for your question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it cannot be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. Before starting this repair, unplug the microwave from the electrical outlet. You will also need to discharge the capacitor as it can hold a charge even when not plugged. We have included a link from our website that you may reference on how to discharge the capacitor. We hope this helps! If you have any questions, please let us know.
How do I access the fuse? I can't figure out how to remove the front panel or the control panel to check to see if the fuse is blown. I need to check this part because the microwave won't turn on and the control panel is unresponsive.
For model number PT7800SHSS
Hi William,
Thank you for your question. NOTE: If you are not comfortable doing this yourself, please get an electrician to do this repair. Before you begin any repair, please unplug the appliance from the electrical outlet. Use a Phillips head screwdriver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift up to remove it. Next remove the control panel mounting screw and then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. To avoid injury, you will need to release the potentially dangerous charge from the capacitor by placing a screwdriver with an insulated handle across the terminals. Be careful not to touch the metal portion of the tool. Use pliers to detach the old fuse from the noise filter board. Install the new fuse by snapping it into the bracket. Replace the inner access panel and secure it with the screws. Now insert the control panel tabs into the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work. We hope this helps. If you would like to place an order for a fuse, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Aaron
October 18, 2021
Hi - our GE Advantium microwave (from 2012) suddenly showed a "Key panel SHORTED. Service may be needed" message on the screen and stopped working. Will this fuse repair that short, or is a whole new panel necessary? And is replacing the panel feasible as a DIY project, for a relatively handy person but with limited appliance repair experience? Thank you!
For model number ZSA1201RSS01
Hello Aaron, Thank you for the question. This indicates the Control Panel with the Keypad will need to be replaced. Microwaves can be tricky since they can hold a dangerous charge even if left unplugged for a period of time. It will need to be discharged to safely perform the repair. If you are not familiar with Microwave repairs, it is best to contact a repair man. We hope this helps!
HOW DO I OPEN THE BOX TO REPLACE THE FUSE? WHAT SPECIAL TOOLS DO I NEED?
For model number JES1460DS3WW
Hello Dennis, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. You will need a screw driver, no special tools. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vicki
November 10, 2022
My microwave keeps scrolling press start but none of the buttons are responding .
For model number JEB1860SM1SS
Hello Vicki, thank you for contacting us. We would recommend replacing the fuse, part number PS1481237. If this does not help, the issue is probably related to the touchpad (control panel) and/or the electronic control board. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Christopher
April 25, 2022
Microwave stopped heating, want to change fuse first but I need to know how to do this. Second turntable keeps turning replaced one door switch but found that there are 3 switches which one or do I have to replace all 3 thanks for the help
For model number RVM1535DM2BB
Hello Christopher, thank you for the question. If the fuse was blown the appliance would not power on as it cuts power to the appliance once blown. The No Heat can be caused by a faulty door switch as well. Only way to know what switch is the issue is testing all three with a multimeter to check the continuity. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This GE Convection Microwave stopped working abruptly and the panel went dark.
Replaced the ceramic fuse and was able to set the clock.
However, as soon as I tested the unit with a cup of water, the MW went dead and the panel went dark.
The ceramic fuse still tests good for continuity.
What else can be causing the problem?
For model number PVM1790sr1ss
Hi Ken, thank you for the great question. Based on the description that you have provided, we would recommend checking the continuity of switches. If they are fine, then you have to replace the control board, part number PS1018328, to solve the problem. We hope this helps!