Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fernanda
February 24, 2020
Hi, my Whirlpool commercial washer spins and drains, but does not agitate in wash mode. Is it likely that i will need shift actuator? When calibration test done the machine did agitate in test mode but when actual wash mode does not agitate .Thank you. look forward to hearing from you soon.
fernanda
For model number CAE2743BQ0
Hello Fernanda, thank you for your question. Based on the description of the issue, we would recommend replacing the actuator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jackie
November 21, 2019
Do you ship to the cayman islands? If so, how much is the shipping?
For model number W10389471
Hi Jackie, sadly we do not. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
John
May 15, 2023
Hi commercial top loader , Machine is not spinning , but making a grinding noise , would this be the actuator?
For model number MVW18PDBWW0
Hello John, thank you for the question. The issue is probably due to the clutch assembly, part number PS10057144. We hope this helps!
Maytag washing machine goes into fail state after noise in drain cycle. How can we test the shift actuator to see if that is actually the issue? The noise is a woop woop woop. Then just stops and lid light blinks red.
For model number MVWP575G
Hi Sharlene, Thank you for the question. You will need to check for Error codes. You can locate the tech sheet on the inner top left corner of the cabinet and follow the instructions provided to check for error codes. It will give you a page on testing components regarding the error code. We hope this helps!
Was this helpful?
Thank you for voting!
Michelle
December 21, 2023
The washing machine does everything through whole cycle except the final spin. It drains then goes to done.
For model number CAE2745FQ0
Hello Michelle, thank you for the question. We would recommend checking the shift actuator, part number PS12349319, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.