Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gary W - January 26, 2024
Verified Purchase
I was under the impression from the ordering site that it was a while control panel and it came in black so I called and was told by your people that white was no longer available
The part I received was for a black Compactor and I have a white one so I called and was told by your people that white was no longer available
January 27, 2024
Hello, thank you for leaving a review on the part ordered. I have sent you an email regarding the order. Hope to hear from you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the operating buttom membrance was cracked
1Turn the compactor off 2Removed the plate on the top of the compactor. Mine was held by 2 screws. Make note of where the electrical connections are located 3Remove the electrical connections on the operating plate. 4Remove 2 screws holding the plate to the compactor the unit housing the operating buttons is now f
... Read moreree from the compactor using a small blade move around the outside of the membrane to release the existing cover Clean the lip where glue still exists peel back the plastic cover from the part and press into place Reverse steps 1,2,3 &4
Read less
Ken from SOMERSET, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing parts that were beginning to rust from outdoor exposure.
I had no problem. My husband is an engineer, so the repairs went well. The only problem I did have was that one of the parts did not arrive. come to find out that it was on backorder and arrived a day or two after I called. The person I spoke with when I inquired was most helpful and expeditious. All in all, my experience was excelle
... Read morent.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
July 8, 2021
I need the flat part that hooks onto the front of the trash compactor, the console with the name and 3 push buttons on off start, i dont need the switches they work fine
For model number ForeverPRO 9872017B Insert for Whirlpool Trash Compactor 1182216 AH985202
Hi Frank,
Thank you for your question. The part number listed under your model number for the trash compactor touchpad is PS11775327. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Frank
July 9, 2021
I need part 16 and part 19 in the diagram, but don't see how 19 fits into 16?
For model number ForeverPRO 9872017B Insert for Whirlpool Trash Compactor 1182216 AH985202
Hi Frank,
Thank you for your question. There are instructions listed with the part on our website that you may reference on how to install the part. Here is some information that customer posted on how he installed the part that may help, "1Turn the compactor off
2 Removed the plate on the top of the compactor. Mine was held by 2 screws.
Make note of where the electrical connections are located
3 Remove the electrical connections on the operating plate.
4 Remove 2 screws holding the plate to the compactor
the unit housing the operating buttons is now free from the compactor
using a small blade move around the outside of the membrane to release the existing cover
Clean the lip where glue still exists
peel back the plastic cover from the part and press into place
Reverse steps 1,2,3 &4. We hope this helps! Good luck with the repair!
