GC900QPPB5 Whirlpool Trash Compactor - Overview

Diagrams for GC900QPPB5

See every part. Know exactly what you need.

Parts for the GC900QPPB5

$27.36

15 Inch Compactor Bags - 15 Pack

★★★★★

(5)

Part #W10165295RP

Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from tough 2.5-millimeter, multi-laminate plastic, and the patented Slip-Grip design prevents the bag from slipping into the compactor bin. They ...Read more

Read less

$77.75

Drive Gear Kit

★★★★★

(60)

Part #882699

This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop at the end of its cycle, the driving gear may be the issue. The gear is white, plastic and approximately 4.5 inches in diameter. This drive...Read more

Read less

$21.45

Screw

★★★★★

(6)

Part #W11233072

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

15" Paper Compactor Bags - 12 Pack

Part #675186

Moisture-resistant liner. Pre-cuffed.

$6.40

Washer Front Leveling Foot

★★★★★

(5)

Part #WPW10001130

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause...Read more

Read less

$40.02

15" Compactor Bag Carrier with Easy Grip Handles

★★★★★

(10)

Part #13030RP

This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carrier in the garbage can before placing a new compactor bag in the bin. The easy-grip handles make removal easier once the bag is full. This pi...Read more

Read less

$57.38

Trash Compactor Directional Switch

★★★★★

(17)

Part #WP777811

Here's a reliable solution when you need to get your microwave working as good as new - the GE Advantium Metal Tray. At the heart of your microwave, this tray works tirelessly to rotate your food, delivering evenly cooked meals every time. The tray is non-stick, making your cleaning process a breeze. The tray is incredibly easy to fit in...Read more

Read less

$24.15

Touch-Up Paint - White

★★★★★

(7)

Part #72017

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more

Read less

$58.42

15 Inch White Plastic Compactor Bags - 60 Pack

★★★★★

(2)

Part #W10165294RB

This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing. They are an environmentally-conscious product that are made of 50% post-consumer recycled material. The bags feature a Slip-N-Grip design ...Read more

Read less

$7.47

Refrigerator Screw

★★★★★

(1)

Part #WP489478

Sold individually.

$17.15

Drawer Roller

★★★★★

(6)

Part #WP9871602

This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your trash bin to allow the canister to roll free. For this repair you will need a nut driver, a pair of pliers, a screwdriver set, and an adjustable...Read more

Read less

$7.47

Trash Compactor Single Metallic Shoulder Screw Size 832 X 3\8

Part #WP780263

Sold Individually.

Questions And Answers for GC900QPPB5

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

John - For model number GC900QPPB5

March 24, 2024

Trash bin drawer doesn't latch when closed and sometimes pops out during compacting.

Hi John, thank you for reaching out. We have found that the issue is with the trash drawer latch, part number PS382677. It keeps the drawer closed when the compactor is in use. You may need to replace it to fix the issue. We hope this sorts out your problem!

$75.39

Latch Lock

Was this helpful?

Common Symptoms of the GC900QPPB5

How this model fails, and the parts that fix it.

Compactor ram gets stuck

Fixed by
these parts

Show All

Doesn’t stop at end of compacting cycle

Fixed by
these parts

Show All

Drawer is hard to open and or close

Fixed by
these parts

Videos related to the GC900QPPB5

Watch our pros, then fix it yourself.

Replacing the Washer Front Leveling Foot

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Compactor stuck in lower position

68 of 84 people found this instruction helpful.

Asbjorn from The Woodlands, TX
Easy
1- 2 hours
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way. ... Read more r />Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Read less

Other Parts Used:

STOP CAP

Drive Gear Kit

Washer

Trash Compactor Bearing

Was this helpful?

Thank you for voting!

Trash Compactor ram wouldn't lower

46 of 54 people found this instruction helpful.

Scott from Indianapolis, IN

Easy

15 - 30 mins

Nutdriver, Screw drivers

I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical ... Read more directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Read less

Was this helpful?

Thank you for voting!

Compactor motor kept running after cycle ran, making alot of noise and unit jumping around.

34 of 42 people found this instruction helpful.

Keith from Keller, TX

Easy

15 - 30 mins

Screw drivers, Socket set

Pulled the Compactor from underneath cabinet, unplugged power. Removed the top plate off compactor to expose the crush piston. Removed the front control panel by removing two phillips screws, wiring and directional (limit) switch is now exposed. Removed the two screws securing switch, removed wiring one wire at a time and replaced on new ... Read more switch in same position. Replaced switch in same manner as removed, and followed reverse of above to re-assemble. Plugged back in and tested, problem resolved works like new. Only took possibly 30" to repair and saved an expensive service call.
Read less

Was this helpful?

Thank you for voting!

View More