Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This suspension rod kit includes four rods designed to stabilize the wash tub in compatible top-load washing machines. By minimizing vibrations and excessive movement during wash and spin cycles, these rods help maintain balance and improve overall performance—especially when handling off-balance loads. Replacing worn or damaged suspension rods can resolve issues such as shaking, banging, or the washer shifting during operation. Installation requires unplugging the appliance and consulting the user manual for model-specific guidance. This kit is compatible with a range of washing machine models and is sold as a complete set.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harvey C - January 18, 2025
Verified Purchase
Great OEM replacement part! Great quality & price!
Part installation was easy enough and straightforward with only approximately 1hour of labor time start to finish. Great OEM part quality. This item restored my washing machine’s operation back to smooth running machine. I would definitely recommend this item to anyone!
★★★★★
★★★★★
Rey G - January 29, 2025
Verified Purchase
Very easy to install.
It was very easy to Install. And the rods works like they suppose to. My washer machine works like is brand new again.
★★★★★
★★★★★
Eric R - April 30, 2025
Verified Purchase
Great part, fixed the issue
My washer when running certain loads would sound and shake as if no-knock warrant was being served attempting to break down the door. After replacing the suspension rods I had to double check to make sure the washer was set going because the violent shaking was no more.
Pretty simple to do, definitely would recommend having a towel close by, I thought I had wet shopvac’d enough, but when tipping and turning more slipped out.
★★★★★
★★★★★
Patricia G - June 7, 2023
Verified Purchase
Suspension rods
These suspension rods worked great and my husband and son in law had no problems installing them. Now my washer doesn’t knock anymore. Saved me from having to buy a new one.
★★★★★
★★★★★
Richard M - June 25, 2019
Verified Purchase
It was very easy took me less than an hour and washer machine is like brand new
Good quality
★★★★★
★★★★★
Jonathan J - November 29, 2022
Verified Purchase
Parts Worked and Repair Was Moderate
I repaired our washing machine Amana Washer NTW4605EW0 using the parts select site to identify what could be the issue after I googled "washing machine shakes on spin." ?? Parts Select was one of the top results. I then went on their site and searched for "washing machine shakes" and it led me to a page that identified possible culprits and let me search on my model washer for replacement parts.
https://www.partselect.com/Models/NTW4605EW0/.
Used a YouTube video to guide me and the rest was history as they say. https://youtu.be/yCexXm_7zDE
I work from home and did the repair on my lunch break.
Full disclosure I don't normally do reviews and if you post a question in response to my review I'm pretty sure I won't respond, my bad. However the video was clear enough for me to follow along and I'm a terrible DIY. However in this case just didn't have funds for new washer so I said I have no other choice but to attempt it.
★★★★★
★★★★★
Curtis M - April 13, 2021
Verified Purchase
Suspension rods
Easy installation, everything works great, does not go off balance
★★★★★
★★★★★
Wayne L - September 15, 2022
Verified Purchase
Easy Repair - parts were duplicate of factory quality!
After watching the You Tube video, my wife and I installed the new parts without issue.
★★★★★
★★★★★
Duy N - September 28, 2021
Verified Purchase
Excellent delivery
Order on September 10, still not receive the package until now (SEPTEMBER 28).
★★★★★
★★★★★
Boyd T - February 28, 2023
Verified Purchase
as described
exact fit. good as new. quick shipping
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Walking all over the floor on spin
Unscrewed the back plate,, unscrewed the top section from the back ,tipped the machine back after unlocking the front two suspension rods, put the new ones in with the new locks , tipped the machine forward, took the two back, suspension rods out, put them back in with a new locks put everything back together made sure all the legs were l
... Read moreevel and recalibrated the machine, which is take dial turn counterclockwise a turn stop on this machine at the regular pointer. Go back one go forward three back one you’ll see all the lights blinking turn to the light that has rinse and hit the start button. It will recalibrate and everything is working fine thank you all they were better rods than what I had ordered. One time before online. These appeared to be the original ones. Which are made better so make sure you use them. Thanks you saved me 600 bucks.!
Read less
Mike from Lake City, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer was shaking bad
Replaced the suspension rods not an easy task but very rewarding to hear it running quiet again when spinning.
George from OCALA, FL
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the washer would go into spin cycle it sounded like the drum was banging all four sides of the washer.
Unplugged from power, unhooked water lines.Then removed back cover and control panel and top set to the side. Rear rods very easy to do by yourself after those where done have help and tip it backwards and change out the front 2 then reassembled and hooked back up and tested. Everything worked like brand new !!!
LADD from ARCADIA, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer would not only shake, but sound like a mule was kicking the side of unit!
I watched the PartsSelect video. I was hoping for the tub with the slots in the tub mounts, but mine didn't have them, so I had to lay it down on its back. The only thing I did that was not in the video was I placed a 2" thick closed cell foam knee pad I had on hand between the tub and the back of the housing. When I laid it down, the
... Read moretub was elevated by 2". This made reaching the two rear rods a little easy. It seems that there would be a more robust way to achieve the dampening affect, but I guess this is cost effective.
It's strange that I searched for my issue several times and only saw recommendations to level the washer. It was level. Then one day I ran across the suspension rod resolution. It didn't do it on every load, but after a year of my wife nagging me and threatening to get a new washer, I finally fixed it. The biggest issue is just logistics in a condo hallway and a little leaking water. I also replaced my hoses. Should be in good shape until the next thing.....
Read less
Eric from HENDERSONVLLE, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shaking and banging around when washing
Youtube has videos. It's very simple just replace one at a time.
Jessica from MT STERLING, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer machine banging and moving/walking
Followed video instructions. Instructions were easy to follow but took me longer than I expected. About 3 hours. Machine is working beautifully since the repair was done.
The installation was very easy and took me 45 minutes to complete by myself. I put the washer on two cinder blocks and then removed the lid. I started with the suspension rods that were closest to me and they were really easy to exchange. When I got to the rods in the back they were a little more difficult because there was more tension w
... Read moreith the new rods installed. I used the old rods to hook and pull the new rods into place and it was overall very easy.
Read less
Rachel from PINELLAS PARK, FL
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shaking violently during spin cycle
Replaced the 4 suspension rods/springs. Only disconnect and replace one at a time. The tub will fall out if you disconnect and replace more than one rod/spring at a time.
Harold from MELROSE, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
24 of 29 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer was off balance all the time
Watched video from partselect and it was on the money. Removed a few screws and tilted the lid. (after unplugging). Pulled it out from wall and tilted machine to have access to bottom. Had grandson reach from underneath and pull the rods out and inserted the new ones. Work great now. My wife is happy and I saved about $600 because I
... Read moredidn't have to buy a new one.
Read less
Michael from MAGNOLIA, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer shaking and banging loudly
I was able to look up the issue on Youtube and watched a few videos and was able to complete the repair with help of my daughter. It was little hard to do but you do need gloves with a good grip when taking the rods out of the washer, but putting the new ones in was very easy.
Once I replaced the suspension rods, there was a li
... Read morettle shaking but not like before. Very quiet now, no crazy loud banging
Read less
PRECIOUS from LAKE CITY, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
31 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lyle
January 27, 2018
Is there a video or illustration that shows the dis/assembly process for replacing the suspension rods (pn # w10780045) on the Whirlpool washer (model wtw4800bq1)?
For model number WTW4800BQ1
Hi Lyle,
Thank you for your question. You will need tape, pliers, and a 1/4" nutdriver. It is a good idea to have a towel handy for any water leaks. Unplug the washer and turn off the hot/cold water. Remove the drain hose and be careful of excess water. Loosen the hoses from the back of the washer, then remove the access panel on the back. Remove the top panel. Tape down the lid so it does not open unexpectedly. Pull the top panel towards you - lift up and push back to unlock it. There are two metal tabs that need to slide into the top panel slots. Tip the top back and lay it back against a wall, being careful not to damage the wire harness. Lift the suspension rod and release it from the ball. Push from underneath to release the ball and bushing. Lift the suspension rod through the opening and attach it to the ball. Close the lid and reverse the process to put your washer back together. Good luck with your repair.
28 people found this helpful.
Was this helpful?
Thank you for voting!
Ranch
November 19, 2017
When loaded the tub seems to drop so low, when agitating the tub bangs against the side. Will new suspension parts repair this or is my problem something else ?
For model number WTW4810BQ0
Hi Ranch,
Thank you for your question. It does sound like your suspension parts would be the issue. I do not think that it would be anything else in this particular case. You should be able to tell if you take a look at your springs. If they pull apart very easily, then they have just worn out and need to be replaced. The springs should be very tough to actually pull on. I hope that helps. Good luck with your repair.
25 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
November 6, 2018
Will the suspension rods stop the machine from hitting the sides and bouncing when its spinning?
For model number RTW4641BQ0
Hello Joe, thank you for your question. If the unit is always off balance and is bouncing and hitting the sides of the cabinet when its in spin mode you will definitely want to replace the suspension rod kit. I hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
December 8, 2017
Does part #22 (tub suspension) include all 4 rods & springs? What about the keepers?
For model number MVWC200BW0
Hello Kevin, Thank you for your inquiry. This part does include all 4 rods and springs. The suspension rod supports (part W10780045 #23 & 24 in the diagram) are a separate part. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
February 14, 2018
Hello my question is do i need to purchase 4 of the suspension or does it come with all 4 of them thanks
For model number Rtw4516fw1
Hi Jimmy,
Thank you for your question. This is a kit of 4 suspension rods. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
October 1, 2019
Are the springs in the suspension, the weakest link, if this unit is severely overloaded? In other words is it common that the suspension kit needs replacing after a unit is overloaded to the point that the tub sags down 2 or 3 inches?
For model number NTW4605EW0
Hello Tom,
Thank you for your question. Yes, if there were any balance issues with the tub at all, whether through overloading or wearing out over time, the suspension rods are always the first part to be the culprit over anything else. Id check your suspension rods to see if one or more of them have any physical defects. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
David
June 13, 2019
We are looking at this model to purchase used, looks to be in great condition. It's been sitting in a garage for almost two years as it was left in a house and the new owners purchased new. Question the tub entire unit you can move back forth where our old one was almost non-moving. Is this normal?
For model number WTW4800BQ1
Hello David, Thank you for the question. It is normal to have some movement in the tub but too much movement can indicate the Suspension Rods PartSelect Number: PS11703288 may need to be replaced. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
JOHNNY
November 23, 2019
Hi my Amana washer shakes alot and move when it going to start spinning and when is stop I change the suspension rub and still shake, what else could be? Thanks.
For model number NTW4605EW0
Hi JOHNNY, check your leveling feet PS11754228, your washer is probably not level. Thank you for your question and good luck with your repair!
The tub in my washer dropped down about 3 inches from the top. It will not spin although i was able to drain it. What holds the tub up?
For model number WTW4816FW1
Hello Lori, Thank you for the question. I suggest checking for damage or wear to the Suspension Rod Kit, PartSelect Number PS11703288. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
June 24, 2019
Is it necessary to buy part ps11703288, the suspension rod kit; or can the springs be replaced separately?
For model number WTW4800BQ0
Hello Ken, Thank you for the question. Very sorry but the springs are only sold as part of the Rods, PartSelect Number PS11703288. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":3,"name":"W10780045","title":"W10780045","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
