Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was bouncing everywhere
Unscrewed the screws. Lifted the top and supported it. Took back off washer also. Had someone help "recommend ". Was fairly easy to remove old and replace the new suspension. Old springs were wore out. New ones work perfect.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
March 21, 2022
trying to figure out what's up with my whirlpool washer It jumps and moves like it's out of balance. Please help. Thanks Bobbie.
For model number wtw4816fw2
Hello Bobbie, Thank you for your inquiry. We have researched the model number you have provided and would recommend checking the suspension rods, the gearcase, the drive motor, the drive belt, and the tub wear pads. Also check the leveling legs to make sure they are even and not damaged. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Do the tub dampener pads come singly or in a set of 2?
For model number MVWC565FW1
Hello Laura, Thank you for your inquiry. We show that the pads are sold individually. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
David
March 1, 2024
Rust spots on top and banging when spinning.
For model number MVWC465HW2
Hello David, Thank you for your inquiry. We would recommend checking the tub suspension rods, the hub kit, and the drive pulley. Also check the screens in the water inlet valve to see if that is where the rust is coming from. We hope this helps.
