Tappan Refrigerator Drawers and Glides

Tappan Appliance Parts
Shop By Part Type

Popular Tappan Refrigerator Drawers and Glides

Your Price
$104.98
  In Stock
Crisper Drawer
★★★★★
★★★★★
(5)
PartSelect Number PS430211
Manufacturer Part Number 240364503
Sold individually.
Installation Instructions
Thomas from Farmingdale, NY
I slammed the door on the pan severely cracking it.
All I did was to take out the cracked pan and slide in the new one.Excellent service.I ordered the pan late evening one day the part arrrived not the next day but the day after.I expected that it would have taken a week or better.I recommend Part Select.com because of this. Read more...
Your Price
$93.76
  In Stock
Upper Crisper Drawer - Front NOT Included
★★★★★
★★★★★
(6)
PartSelect Number PS461312
Manufacturer Part Number 5303289500
Front must be ordered separately.
Fixes these symptoms
Installation Instructions
J Matthew from Great Bend, KS
Storage drawer glides broken
I slid the drawer fronts off by pulling out slightly on the bottoms and pulling up. The drawer fronts come right off. Then slide them onto the new drawers that matched perfectly. It took longer to empty the broken drawers than it did to replace them. Read more...
Your Price
$87.95
  In Stock
Lower Crisper Drawer
★★★★★
★★★★★
(9)
PartSelect Number PS461313
Manufacturer Part Number 5303289501
This lower drawer does NOT come with the front cover.
Fixes these symptoms
Installation Instructions
J Matthew from Great Bend, KS
Storage drawer glides broken
I slid the drawer fronts off by pulling out slightly on the bottoms and pulling up. The drawer fronts come right off. Then slide them onto the new drawers that matched perfectly. It took longer to empty the broken drawers than it did to replace them. Read more...
Your Price
$14.03
  In Stock
Crisper Drawer Cover Support
★★★★★
★★★★★
(2)
PartSelect Number PS461210
Manufacturer Part Number 5303288973
This is the replacement crisper drawer cover support for your refrigerator. The crisper shelf rests on the support, which keeps it level. If your drawer cover or shelf will not stay level, or will not stay in place, the support may be damaged. The support is held in place on the refrigerator wall with a drive pin. To remove the damaged support, simply drive the pin all the way in, and use a putty knife to pry the support from the refrigerator wall. At this point, pull the drive pin out and replace the old support with the new one. This is an OEM part and is sold individually.
Installation Instructions
Edward from Brooklyn, NY
the main tray holding the vegetable bins had broken and prevented the bins from operating smoothly
Removed all food and slid the broken shelf tray. I replaced the right side tray support and installed the new tray.
I also had to replace the front of one of the bins, as the shelf was binding the bin and the front handle had broken due to amount of force needed to open that bin.
Once the tray was in properly, the bins worked normally.
Read more...
Your Price
$95.33
  Special Order
Upper Crisper Drawer
★★★★★
★★★★★
(10)
PartSelect Number PS461208
Manufacturer Part Number 5303288971
The front for this part is sold separately or you can use your existing part.
Installation Instructions
Brenda from Tipp City, OH
Storage Drawers Were Cracked And Broken ...Needed Replaced
Super easy, I removed the drawer fronts off the broken drawers by sliding them off and simply slid the existing drawer front onto the new replacement drawers. Slid the new drawers into place. New drawers fit perfectly. Read more...
Your Price
$69.99
  In Stock
Crisper Pan Cover
PartSelect Number PS3651544
Manufacturer Part Number 242120501
Your Price
$41.65
  In Stock
Meat Drawer Hanging Rail - Right Side
★★★★★
★★★★★
(2)
PartSelect Number PS429412
Manufacturer Part Number 218971302
This drawer rail supports the right hand side of the meat drawer.
Installation Instructions
Brad from Kent, OH
The hanging rails & meat pan runners were broken
1) The meat drawer and rails were damaged when my 7-year old son closed the refrigerator door while the meat pan was still extended.
2) I ordered the parts on-line using your easy to follow part search.
3) The items arrived 3 days later.
4) I used a phillips screw driver to remove the old rails & I attached the new rails (approximately 10 minutes).
5) I slid the front cover off of the damaged meat pan and slid it on to the new meat pan (approximately 3 minutes).
6) I slid the new meat pan onto the new rails.
7) I demonstrated to my son the importance of closing the meat pan prior to shutting the refrigerator door.
Read more...
Your Price
$86.13
  In Stock
Lower Crisper Pan
★★★★★
★★★★★
(1)
PartSelect Number PS430209
Manufacturer Part Number 240364501
Your Price
$79.08
  In Stock
Crisper Drawer Frame
★★★★★
★★★★★
(1)
PartSelect Number PS427282
Manufacturer Part Number 218147701
This acts as the shelving unit and also the glides for the crisper pans. NOTE: Glass NOT included. Frame only.
Installation Instructions
Concetta from Lemont, IL
broken parts
Most of the parts just snapped together. The two screws needed were back ordered. ($5.00). So I used screws purchased from the hardware store (5 cents!). Hey, it costs a lot of money to stock parts so they are available after 10 years.

I ordered the wrong part and I am very, very pleased with the return procedure. Absolutely painless. I am also pleased with the shipping process. I had the parts shipped via ground transport. Heck, after 10 years, what's another day. Well, they arrived the second day!

Anybody who needs parts for their appliance, can count on PartsSelect for first class service.
Read more...
Your Price
$34.47
  In Stock
Meat Drawer Hanging Rail - Left Side
★★★★★
★★★★★
(4)
PartSelect Number PS429410
Manufacturer Part Number 218971202
The drawer track supports the left hand side of the sliding drawer.
Installation Instructions
Brad from Kent, OH
The hanging rails & meat pan runners were broken
1) The meat drawer and rails were damaged when my 7-year old son closed the refrigerator door while the meat pan was still extended.
2) I ordered the parts on-line using your easy to follow part search.
3) The items arrived 3 days later.
4) I used a phillips screw driver to remove the old rails & I attached the new rails (approximately 10 minutes).
5) I slid the front cover off of the damaged meat pan and slid it on to the new meat pan (approximately 3 minutes).
6) I slid the new meat pan onto the new rails.
7) I demonstrated to my son the importance of closing the meat pan prior to shutting the refrigerator door.
Read more...

Related Parts