Tappan Refrigerator Hardware
Find your part
Enter your model number or a part number and click "Search"
Popular Tappan Refrigerator Hardware
Your Price
$11.36
Screw
PartSelect Number PS1525803
Manufacturer Part Number 218755504
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.
Installation Instructions
Nancy from LEHIGH ACRES, FL
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Read more...
Your Price
$16.05
Screw
Respectfully
Roy Read more...
PartSelect Number PS1526032
Manufacturer Part Number 240521303
This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from youRespectfully
Roy Read more...
Your Price
$7.79
Single Washer
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now. Read more...
PartSelect Number PS899288
Manufacturer Part Number 240311303
Sold Individually.
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Patrick from Hollis, ME
refrig. door fell off lower hinge
took door off to see damage / what caused it . put door back on with temporary fix. /looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now. Read more...
Your Price
$6.48
Screw
Respectfully
Roy Read more...
PartSelect Number PS1525540
Manufacturer Part Number 215503203
Cross Recessed Pan Head Screw Size: 10-16 X 0.500
Installation Instructions
Roy F from Oakdale, CA
Broken Handle on Main Door
Unscrewed the old screws and removed broken piece of handle. Put new screws in for handle to latch in. Swung handle in place and put the 2 special screws in top of handle. Job done. With the correct parts from Parts Select The replacement was a breeze. Thanks for your speedy delivery and support. I will definitely continue to get all my various appliance parts from youRespectfully
Roy Read more...
Your Price
$9.40
Screw
I pulled out the entire shelf and unscrewed the rail. I manuevered in the new rail and screwed it down. I returned the shelf and now I no longer have the deli drawer drop out of the tracks.
To replace the gasket, the worse part was having to empty the contents of the door and removed all of the 30+ screws that hold it in place. I positioned the gasket over the edge of the door inset, pressed it back up against the door with the gasket in place, lined up the screw holes and started turning the screwdriver. I screwed in the top 2 corners first so they would hold the door inset in place from that point.
The instructions stated that silicon sealant should be applied between the gasket and the door, particularly at the corners, and I did this, particularly since the corner pulling out was why I was replacing the gasket in the first place.
However after I returned all the screws to the proper place and turn the refrigerator back on, I noticed condensation around the seal. I realized after a few days that I had silicon on the gasket itself and this was causing an imperfect seal. I cleaned all the little wisps of silicon off the gasket and the frig has been fine ever since. Read more...
PartSelect Number PS1525528
Manufacturer Part Number 215005101
This screw is sold individually.
Installation Instructions
Pamela from Severna Park, MD
broken deli drawer and gasket distended and out of place at corner
My husband and I were online pricing new refrigerators ($1100 and up plus an otherwise okay frig to add to the landfill). I had a moment of clarity and tried a parts search and found this site. I decided we were NOT going to replace it, we would fix it.I pulled out the entire shelf and unscrewed the rail. I manuevered in the new rail and screwed it down. I returned the shelf and now I no longer have the deli drawer drop out of the tracks.
To replace the gasket, the worse part was having to empty the contents of the door and removed all of the 30+ screws that hold it in place. I positioned the gasket over the edge of the door inset, pressed it back up against the door with the gasket in place, lined up the screw holes and started turning the screwdriver. I screwed in the top 2 corners first so they would hold the door inset in place from that point.
The instructions stated that silicon sealant should be applied between the gasket and the door, particularly at the corners, and I did this, particularly since the corner pulling out was why I was replacing the gasket in the first place.
However after I returned all the screws to the proper place and turn the refrigerator back on, I noticed condensation around the seal. I realized after a few days that I had silicon on the gasket itself and this was causing an imperfect seal. I cleaned all the little wisps of silicon off the gasket and the frig has been fine ever since. Read more...
Your Price
$7.99
SCREW
PartSelect Number PS2331296
Manufacturer Part Number 216858001
Sold Individually.
Installation Instructions
Terrence from WESLACO, TX
Your Price
$13.23
Your Price
$16.59
Your Price
$8.59
Door Shelf End Cap - Right Side
Chris Read more...
PartSelect Number PS467698
Manufacturer Part Number 5303323480
The right-side door shelf end cap is designed for use in your refrigerator. The function of this part is to connect the shelf bar to the refrigerator door, and hold it in place. This part fits the right-side of your refrigerator door shelf, the left-side door shelf end cap is sold separately. This part is made entirely out of plastic, and is white in color. This product measures approximately 1-inch in width by 1-inch in length. Many of our customers have rated this repair as very easy. The only tool you may need is a soft-faced hammer. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Christopher from Salisbury, NC
The seals on the doors were shot so the refigerader was sweeting.
I started with the freezer door. I lifted the old gasket from the inside edge to get to the hex head screws that attach the plastic inside liner to the outer door. I did not need to start at any one point so I picked a screw and removed it then I worked my way around the door. I was careful to not drop the liner when I removed the last screw. I removed the liner and pulled the old seal out of its seating grove and replaced it with the new seal. Then I used a hair dryer to fix a few places where the seal was deformed from the packing. The heat helped to get the magnetic seal back into the correct shape. I only had one corner to fix the rest of the seal was fine right out of the box. I applyed a little sealer just as the instruction said to do and then reinstalled the linner and new seal. Then I went through the same process for the refrigerator door. Not a hard job just a lot of screws to remove and then put back. The seal its self took about five minutes. Thanks for the parts!Chris Read more...
Your Price
$8.62
Door Shelf End Cap - Left Side
Chris Read more...
PartSelect Number PS467699
Manufacturer Part Number 5303323481
This white door shelf end cap is used for left side of some refrigerator door shelves.
Installation Instructions
Christopher from Salisbury, NC
The seals on the doors were shot so the refigerader was sweeting.
I started with the freezer door. I lifted the old gasket from the inside edge to get to the hex head screws that attach the plastic inside liner to the outer door. I did not need to start at any one point so I picked a screw and removed it then I worked my way around the door. I was careful to not drop the liner when I removed the last screw. I removed the liner and pulled the old seal out of its seating grove and replaced it with the new seal. Then I used a hair dryer to fix a few places where the seal was deformed from the packing. The heat helped to get the magnetic seal back into the correct shape. I only had one corner to fix the rest of the seal was fine right out of the box. I applyed a little sealer just as the instruction said to do and then reinstalled the linner and new seal. Then I went through the same process for the refrigerator door. Not a hard job just a lot of screws to remove and then put back. The seal its self took about five minutes. Thanks for the parts!Chris Read more...
Related Parts
- All Tappan Refrigerator parts
- Tappan Refrigerator Compressors
- Tappan Refrigerator Door Shelves
- Tappan Refrigerator Drawers and Glides
- Tappan Refrigerator Hinges
- Tappan Refrigerator Hoses and Tubes
- Tappan Refrigerator Ice Makers
- Tappan Refrigerator Seals and Gaskets
- Tappan Refrigerator Switches
- Tappan Refrigerator Thermostats
- Tappan Refrigerator Trays and Shelves
