Shindaiwa Water Pump Parts

Shop By Appliance Type Shop By Part Type

Popular Shindaiwa Water Pump Parts

Your Price

$4.99

Shindaiwa Water Pump Primer Pump

PartSelect Number PS8858167

Manufacturer Part Number 12318140630

The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install. This part installs onto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.

Your Price

$6.82

Shindaiwa Water Pump Fuel Filter

PartSelect Number PS11836543

Manufacturer Part Number A369000440

This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris. This part should be changed regularly as part of good engine maintenance. If the engine sounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.

Your Price

$5.19

Shindaiwa Water Pump Gasket

PartSelect Number PS9237390

Manufacturer Part Number V107000010

This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. This gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.

Pre-Filter, Foam – Part Number: A226000700

Your Price

$4.99

Shindaiwa Water Pump Pre-Filter, Foam

PartSelect Number PS9313973

Manufacturer Part Number A226000700

This Foam Air Filter is a yellow, foam part, used to filter out contaminents from entering the engine. It lays on top of the main air filter, is rated as "Easy" to install, and requires a screw driver . If your filter is dirty and discolored then it has worn out, and the part should be replaced. Refer to your make, model and diagram to ensure this air filter is correct for your machine.

Your Price

$4.99

Shindaiwa Water Pump Clip 6

PartSelect Number PS9238696

Manufacturer Part Number V490000500

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

Air Filter Cover – Part Number: A232001340

Your Price

$5.32

Shindaiwa Water Pump Air Filter Cover

PartSelect Number PS9178376

Manufacturer Part Number A232001340

Tube, Fuel Pick-Up – Part Number: V471002350

Your Price

$5.23

Shindaiwa Water Pump Tube, Fuel Pick-Up

PartSelect Number PS9322956

Manufacturer Part Number V471002350

Your Price

$4.99

Shindaiwa Water Pump Primer Cover

PartSelect Number PS8857330

Manufacturer Part Number 12314205560

This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch. This part is installed using a screwdriver, and is rated as Easy to install by our customers. This part secures the plastic primer bulb to the air purge body assembly, and must be replaced if damaged or bent.