Frigidaire/Frigidaire_Thumb/SY9CMZMG.gif
See part 14 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Single Spring with Insulators

★★★★★
★★★★★
3 Reviews
$ 34.87   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS735645
Manufacturer Part Number 134144700
Manufactured by Frigidaire
Product Description

Single Spring with Insulators Specifications

This is a single spring with insulator, but you may also know it as a suspension spring. It is a part for your washing machine. If your tub is no longer stable, which would cause shaking, moving, and excess noise, you may need to replace this part. The tools you will need in order to make this repair include a Phillips screwdriver and a pair of locking pliers. You will find the insulator on each end of this piece. We recommend replacing both springs in your appliance at the same time to ensure even wear.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Shakes and moves | Noisy | Will not drain | Pumps but will not spin
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Crosley.
Part# 134144700 replaces these:
AP3212517, 936912, 131277700, 131663600, 134136300
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Carol
    May 9, 2019
    Is there just one suspension sping on my washer or one on each side?
    For model number FWT445GES2
    Hello Carol, Thank you for the question. There are 1 spring on each side of the drum, so two required for the appliance. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Frigidaire Washer Single Spring with Insulators

      Customer Repair Stories
       Average Repair Rating: 2.9 / 5.0, 12 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Inner support spring and vibration shock both broke - tub dropped down within the washer
      Remove power
      Remove water connections
      Pull out washer to have sufficient room to access the back and the top.
      Removed the top panel (4 screws at top- back)
      Removed the back panel (a lot of screws)
      Removed small metal retainer strip on top edge over broken spring
      Removed broken spring, hung top of new one.
      Pulled up tub to as I stretched out the spring to mount spring to tub
      From the back, unplug and remove 2 crews holding the electronic motor control unit from lower left

      For both shocks:
      This was the most "difficult" part - locate the 2 plastic retainer pins holding the shock, locate the tooth (or tab) holding the pin in place and push the tab in (I had to use some leverage - its stiff plastic covered in grease - a spare screwdriver handle helps to push the tab down).

      After pins are removed, shock just pulls out (weight of the tub handled by the suspension springs).

      Replace with new shocks (1 pack has a pair), replace pins.

      Reinstall motor control unit.

      Reassemble frame. reattach water supply lines.

      I had to plug in the washer, activate a cycle, then unplug/plug in the washer again.

      It helps to have a screwdriver attachment for a variable speed drill to handle all of the screws.

      All told - about 45 minutes, most of this spent on removing the pins.
      • Eric from Hillsboro, OR
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        5304485917, 134144700
      75 of 81 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      washing tub had broken away fm 3 of 4 supports
      disconnected fm water supply and electrical ckt
      move washer fm beneath dryer (stacking config.)
      removed back, found 2 broken shocks (round type) and 1 broken spring (left looking from back). checked online for parts and found your site. ordered and waited a few days.

      back on task, removed controls (lower left corner) to reach pins, removed front lower panel, removed pins and broken remains of both shocks. removed broken spring. left remaining spring to keep tub suspended.

      back on task when parts arrived. installed shocks --note that it was not clear that there are 2 shocks in each package (so i order 2 pkgs and now have 2 extra shocks --for next time it breaks away ;-)

      crafted a 'hanger' with 10ga wire and 2x4 to permit tub to be supported and/or suspended without unduly stressing new components. attached both shocks being careful to follow instructions about alternating direction and orientation in relation to plastic bushing on the shock mounting points. removed remaining spring and used short length of 10ga wire to pull spring into position and lock.

      re-assembled back and front cover... re-attached control circuit. moved closer to water and electrical supply and tested through 2 cycles --no problems found.

      put back into position and leveled and locked.

      works fine now.
      • marcia from Holden, MA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers, Socket set
      33 of 37 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The only problem was that the drive belt was so tight that it was two inches short from the drive shaft making it very difficult to put on by hand.
      I did my best to stretch the belt out and as I wrapped it around the pulley one hand was preventing the belt from slipping off and the other hand had the screwdriver to use as Leverage to stretch and slip the belt on the other side of the pulley. One thing that I saw but didn't try was to use zip ties to temporarily hold the belt in place so it didn't slip off that may have helped.
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Out of balance when on final spin cycle
      Had to replace one Spring on top of the tub and both shock absorbers. Anyone with even a limited amount of mechanical ability could handle this repair. Save yourself about $300 in repair cost and replace these items yourself. Spring and Shocks absorber kit cost less than $60 with shipping.

      Just look at the diagram that comes with the parts, it's a piece of cake. The most difficult part is replacing the spring, she is stiff. You will need to take the top of the machine off, which is super easy, and remove the metal keeper on top of the frame rail. Get someone to help you as you will need to lift the tub and slip the spring over the frame rail.

      The shocks are the easiest part of the repair, and should take less than five mins. to replace.
      • Kevin from Vancouver, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        5304485917, 134144700
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      right side tub mounting spring broke
      disconnected electric and water supply. removed back cover from front loading washer. removed two screws from spring end plate on the top of the washer. replaced old spring with new spring/insulators by lifting the tub and hooking the new spring on. replaced the back cover and top spring cover plate. reconnected water supply and electric. machine is working like it did before the spring broke. very easy fix. the majority of the effort was moving the washer around to get easy access.
      • Lisa from Phoenix, AZ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134144700
      6 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Tub was sagging and seal was not complete, would leak
      The tub is supported by two springs and two shock absorbers. First remove the back panel of the washer. Then I placed the auto jack from my car under the tub, alongside the motor, and cranked it up, lifting the tub, until the top of the seal in the front was compressed. Then I took the top off of the washer to access the springs. There are retaining straps over the top of each spring that I had to remove to get to the springs. Pulling up hard on the spring allowed me to get a pair of pliers on the spring and pull it out of the slot it was in.

      Once it was out of the slot I could remove it from the tub as well. I put the new spring in and replaced the retaining strap. Then I repeated this process on the other spring.

      Once both springs were in place the tub was hanging as it should and the seal around the door was smooth all the way around. I haven't seen any more leaks since replacing the springs.
      • Steven from Irving, TX
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        131763310, 134144700
      6 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      2 shocks and one spring broke
      repair wasn't too difficult, hardest was raising the drum to engage the springs.

      Steps I took:

      remove the rear and front (bottom) covers. To remove the rear cover, I went ahead and took the hoses off. The bottom cover needs a good tug once the two screws are removed.

      Once both covers were off, it was obvious what had to be replaced.
      Pushing the notch on the shocks, removed both top and bottom pieces. Then I used books to lift the drum so that i could attach the new springs. Removed the books, installed the shocks from the top to the bottom.

      Went ahead and removed the coin drop, cleaned it out, and reattached. Ran the washer two cycles to confirm the vibrations were gone. Loaded it up with towels (seemed to cause the worst vibs) and it was quiet.

      Re-installed the covers and that was it.
      • Don from campbell, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        5304485917, 134144700
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water leaking and broken shock absorbers
      Removed spring retainer straps from top of springs. Propped up tub with blocks and a wedge. Lifted out each spring and replaced. Re-attached spring retainer straps. Removed pins from shock absorbers (old/broken ones). These break due to moving washer w/out installing original foam blocks and support screws or due to age and fatigue. Pins have a retainer that must be depressed as you pull or push them out. may need to spin back and forth with pliers as you pull them. Bottom right pin won't come out w/out a hassle. Cut it in pieces with dykes and used spare pushed in from the FRONT (not the rear, as it was originally installed). Found leak was not fixed by getting the drum back up to proper height. Found bolt on tub had broken the bottom of the soap dispenser "tray". This is a 50.00 part. Made a patch from the bottom. Roughed up plastic and used silicone adhesive. After it had adhered filled from top with more silicone. Allowed 24 hrs to dry. Washer is as good as new.
      • Dan from Concord, CA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        5304485917, 134144700
      3 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Spring Ang Shock Broke
      .
      • James from North Canton, OH
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        134144700
      3 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer was bouncing and emitted a banging noise only when on high speed spin
      I watched the videos and replaced the shocks and suspension springs. This worked to stop the unit bouncing completely and cut the banging noise in half. Further diagnosis revealed a damaged drum and outer shell. The repair itself was very simple and didn't require special tools or skills. There is a tricky shock absorber locking pin on the right shock bottom position. There is a control box of some sort that prevents the complete removal of the pin without breaking it. On install, I simply pushed the pin through from the front. Ultimately, I ended up replacing the unit. However, I found the site to be extremely helpful. Great service.
      • chris from COMMERCE TWP, MI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        134144700
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      3 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        3
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS735645
          Manufacturer Part Number: 134144700
          Brand
          Model Number
          Description
          Frigidaire
          38712
          Washer - WASHER
          Frigidaire
          38802
          Washer - WASHER
          Kenmore
          41724182300
          Washer
          Kenmore
          41724182301
          Washer
          Kenmore
          41727182700
          Washer
          Kenmore
          41727182701
          Washer
          Kenmore
          41727182702
          Washer
          Kenmore
          41727182703
          Washer
          Kenmore
          41727182704
          Washer
          Kenmore
          41729022890
          Washer
          Kenmore
          41729042990
          Washer
          Kenmore
          41729042991
          Washer
          Kenmore
          41729042992
          Washer
          Kenmore
          41729052990
          Washer
          Kenmore
          41729052991
          Washer
          Frigidaire
          41739012890
          Washer - Stackable
          Frigidaire
          41739012891
          Washer
          Frigidaire
          41739022890
          Washer
          Frigidaire
          41739022891
          Washer
          Kenmore
          41740032990
          Washer
          Kenmore
          41740042990
          Washer
          Kenmore
          41740052990
          Washer
          Kenmore
          41740142000
          Washer
          Kenmore
          41740412700
          Washer
          Kenmore
          41740412701
          Washer
          Kenmore
          41740412702
          Washer
          Kenmore
          41740412703
          Washer
          Kenmore
          41741042000
          Washer
          Kenmore
          41741052000
          Washer
          Kenmore
          41741142000
          Washer

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service