Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
MICHAEL M - August 30, 2018
Verified Purchase
Exact same part easily installed no problem
Job went as expected,easy quick repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was noisy during drying cycle.
The noise came from the dishwasher door. Removed the Phillips screws from the door edge to gain access by separating the front of the door. Had to disconnect some of the electrical connectors to allow more access. Disconnected the blower motor connector. Removed the screws holding the motor assembly and removed the blower motor. Inst
... Read morealled the new blower motor and reconnected the electrical connectors. Reassembled the door and cycled the dishwasher. Very quiet now!
Read less
Carl from SUMMERFIELD, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud noise during the drying cycle at end of wash.
Power off. Loosen screws under door with door closed. Open door, remove Philips screws, slide off door. Remove and replace motor. Note: the motor I replaced had identical resistance readings as the new one but was still bad. The old motor can also be disconnected and powered from a 110v outlet in ur house. Under the kickplate I found a fo
... Read morelded up paper with an electrical diagram and the function test to test individual motors and pumps.
Read less
Edward from ALEXANDRIA, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plugged Detergenent Pump & noisy Blower
Access to the parts was easy. Simply remove the outer door cover.
The only problem was that I had to disassemble and reassemble the dishwasher two times. Other than that, the actual repair was very simple; remove the old, replace with new and test with the built in diagnostic.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
March 18, 2018
How do I remove the dishwasher door cover to access the blower motor. I have 4 phillips head screws on both sides and 4 at the top. And none at the bottom. I have seen videos of other models but not mine. It is the stainless steel model with control pad on very top part of door. Not visible looking straight on. Thank you. I'm hoping it is just those 12 screws because if this gets too complicated I wont order the part and will call the expensive GE repair guy. I like to think I can safely do this though, with the power breaker switched off. Have replaced ice maker and valves on the fridge last year. With no problem.
For model number PDW928ON2OSS
Hi Mark, Thank you for the question. Looking at the diagrams and the parts, you should be able to remove the panels by removing the 12 screws. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
July 20, 2022
Won't start. Has power. Only "delay hrs" and "steam" buttons work on op panel. Tried power off reset, no change. Metered door switch on door latch, checked OK. Can't make any change in symptoms.
Any ideas would be appreciated. Thanks
For model number PDWT585V00SS
Hello Gary, Thank you for the question. This could be an indication the Console is faulty and may need to be replaced. We also suggest checking the wiring connections for damage or a lose wire. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
