MOTOR

Hello April, Thank you for the question. To access the motor you would turn power off to the appliance and remove the screws holding the underside panel of the appliance in place around the outer edge of the bottom. Once the screws are removed, you will see the motor. There should be 2 screws holding the motor in place. Remove the screws and pull down on the motor to release. You will also need to pull the plastic coupler from the post inside the cabinet. Reverse the steps to reinstall and once in place open the door and push the coupler that the turntable rides on in the middle back onto the motor post. You will want to turn it until you feel it slip onto the motor shaft and then push down. Reinstall the base and turn the power back on. We hope this helps!