Drawer Roller

Hi Brian, Thank you for your question. The part number listed under your model number for the nut is PS11744731. I hope this helps. Thank you and have a great day!

Hello Ray, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

Hi Ray, Thank you for your question. The issue may be with the toe guard. From the Whirlpool website, "If the toe guard is rubbing on the floor covering, the toe guard clearance may be changed as follows: Mark on each side of the toe guard the amount of toe guard that rubs the floor covering. Remove the drawer from the compactor. Refer to "Cleaning Inside the Cabinet" in your Owner's Manual. Use a ruler and a pencil or chalk to draw a line between the marks on each side of the toe guard. Use scissors or a utility knife to cut the toe guard along the line. Replace the drawer. if the toe guard still rubs the floor covering, repeat steps 1-4." We hope this helps! Good luck with the repair!