This drain pump assembly is a genuine OEM replacement part for your dishwasher. In order to complete this repair you will need a Phillips screwdriver, pliers, and a socket. You will need to pull the dishwasher out from the cabinet and lay it on its back in order to access through the bottom and replace the drain pump.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
LG.
Part# ABQ73503004 replaces these:
ABQ73503002
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.8
Filter By Rating:
5 Stars
16
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Leah G - August 16, 2023
Verified Purchase
Great Part, easy repair, works great
Great condition and it works great.
★★★★★
★★★★★
James B - March 15, 2022
Verified Purchase
Information from buyers made possible my success.
Part came quickly. Information posted from others helped me buy with confidence. My son installed part without having to pull the dishwasher out because it was right under the door. It took strong hands used to working on car engines to complete the job. My dishwasher runs great and no more water left behind. Thanks!
★★★★★
★★★★★
Greg S - February 12, 2022
Verified Purchase
Part worked as described.
After watching a YouTube video I realized that I only needed the impeller part of the assembly. Very easy to repair and the dishwasher is back up and running.
★★★★★
★★★★★
Annabelle R - January 30, 2022
Verified Purchase
Great, worked as expected
The part works well, excellent quality. Great customer service.
★★★★★
★★★★★
Norbert S - October 24, 2021
Verified Purchase
Fast, simple installation
Fast shipping. Part fit perfectly and installed in minutes. Was back in operation in no time
★★★★★
★★★★★
Brian M - June 13, 2021
Verified Purchase
Play the percentages: it worked for me.
As a low skill self-repairing homeowner I found using the PartSelect website in conjunction with my dishwasher owner manual led to complete success of the repair.
It was easy. Using the symptom (dishwasher won't empty) got me to the general area in need of repair according to my dishwasher owner manual. Using that information I went to the PartSelect dishwasher repair section using the same symptom as my guide. It said that it was an 81% probability that the problem was the part. I ordered a new one. It worked and I couldn't have been more proud of myself or happy to use PartSelect in the future.
★★★★★
★★★★★
Holly T - August 28, 2020
Verified Purchase
Worked great! Simple fix
Easy to switch out. Some confusion with a valve.
★★★★★
★★★★★
Cindy B - June 22, 2020
Verified Purchase
Easy repair
Our dishwasher wouldn't drain. My husband repaired our dishwasher with this part. It works perfectly now.
★★★★★
★★★★★
Nathan M - January 30, 2020
Verified Purchase
Easy repair. Great part. Worked as I hoped it would.
I bought the drain pump and installed it without too much trouble. Dishwasher cleans like new again. The price was a few bucks more than other sites but at least PartSelect had it in stock. None of the others had it in stock. Shipping was pretty fast. I ordered it late on a Saturday night and received it around 10:00 am on Wednesday.
★★★★★
★★★★★
Conrad C - January 8, 2020
Verified Purchase
Drain pump replacement
The part was easy to install and immediately fixed my problem. It arrived quickly after ordering, allowing us to get the dishwasher working again with very little down time.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishwasher not draining
turned off circuit breaker. Removed bottom panel which allowed access to drain pump. Disconnected electrical plug. Clamped hose clips and removed hoses. Removed old drain pump assembly. Installed new assembly by reversing process. Access was a bit tight but managed to do it without pulling the whole dishwasher out of the cupboard.
Glen from HUDSONVILLE, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water in dishwasher at end of cycle. Error e1 / d1
I actually didn't remove whole drain pump assembly. Just removed the old pump motor by rotating. Lots of water drains out so be ready with an old towel. Then installed the new drain motor and tossed the new housing. No more water at the end of cycle!
Jacob from WILMINGTON, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn’t completely drain
Shut off electrical breaker, Removed bottom cover plate by removing 2 Phillips head screws. I was able to remove the pump without pulling the dishwasher out by removing wiring connection, hose clamps with a pair of pliers, and removed the 2 rubber hangers However I couldn’t reinstall the pump without pulling the dishwasher out. 1.I disco
... Read morennected the electrical wiring (breaker was shut off). 2. Shut the water supply off and removed water line at the dishwasher. 3. Disconnected the drain at the sink. 4. Removed the 2 retaining screws 1 on each side that secures the dishwasher in place. 4. Removed the upper and lower racks, Used a shop vac and sucked the water out of the bottom of the dishwasher. 5. Pulled the dishwasher out making sure the drain line came with it. 6. Laid The dishwasher over on the back side to the floor. 7. Reinstalled pump with new hose clamps and hoses that came with the pump. ( it probably would have been easier to remove the pump with the dishwasher pulled out) reinstall the wire connection to the pump (snap in connection), connected the 2 new rubber hangers to pump and connected to the dishwasher . 8. Slide the dishwasher back in place and reconnect water line be sure and use some Teflon tape, reconnect electrical wiring, reconnect drain line, secure dishwasher with screws. Turn water on and check for leaks, turn electrical power back on. I ran the dishwasher to make sure it worked and make sure there weren’t any leaks before I installed the bottom cover plate. I had an appliance service person say that they wouldn’t work on an LG because they were hard to work on and very difficult to get parts. My experience was just the opposite thanks to partselect. The Dishwasher works like brand new.
Read less
Robert from VERNAL, UT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
14 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining, causing "0E" number to appear and initiatate dishwasher shutdown.
According to your site, the part(s), to consider, to resolve the problem were: 1.Motor Assembly DC Pump, OR 2.Drain Pump. I simply selected the drain pump because it was cheaper and because it was making a clicking noise. (The only significant noise that this dishwasher was making) To be safe, I unplugged the unit and turned off the w
... Read moreater, under the sink. I removed the kick plate and I unscrewed the anchor clips from under the counter and carefully pulled the unit out. I then opened the dishwasher and removed the lower rack. To minimize water clean-up, I took a rag and soaked up the standing water in the bottom until it was nearly dry. I then tipped the dishwasher on it's left side, knowing where the location of the drain pump (front, right), would be in an easier location for me to work. I first unplugged the pumps wiring. Then, with pliers, I was able to disconnect the clips on the short, rubber hoses that hold the pump in alignment.(Use caution: If reusing the same rubber hose(s) on the new pump, it will be easier if you put them on in the same direction as they were take off) Then I removed the rubber supports off their hooks, that allow the pump to hang from the bottom of the dishwasher. Once the rubber hoses are re-connected on the new pump and placed on to it's former proper alignment, you can re-attach the rubber supports to their hooks. And last, but not least, remember to plug the new pump's wires back in place. Carefully stand up dishwasher and push it slowly back into place. I plugged in the unit and turned on the water. Before I screwed the unit back to the counter and kick plate back on the front, I ran a load and watched for leaks beneath the new pumps area. No leaks. "Easy, Peasy".
Read less
Patrick from CHANDLER, AZ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
23 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
April 8, 2019
Dishwasher not draining. When i manually run the drain cycle the drain pump pumps water into disposal for a few seconds and shuts off and then I hear a whining noise for a few seconds. Pump cuts back on and runs a few seconds and shuts off again and I hear the whining noise again and this continues till it’s empty. Is this a common issue on this model and what are some common causes? Thank you for any input you may have.
For model number LDF7551ST
Hello Jason, thank you for inquiring. For this symptom you will want to replace either the Drain Pump part PS11706890 or the Pump Motor Assembly part PS11710287. We hope this helps.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Taryn
January 28, 2020
Machine is not draining, giving an 0e error code. I've checked the hoses, no kinks or breakage. It's not making any unusual noises, just fills up with water and then stops and gives the error code. Could it be the drain pump? Thanks!
For model number LDF7774BB
Hi Taryn, thank you for your question. The 0e error code means that either your have a clogged drain hose or a clogged/faulty drain pump. If your hoses are not clogged then you will have to replace your drain pump. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
June 14, 2022
Drain pump runs at beginning of start cycle but OE error code at end of full wash cycle. Selecting half load and pump out completes and no error code. After getting error code I turned off machine and came back next morning and ran maintenence pump out just fine. I replaced the drain pump but still have the same issue. No hose kinks or filter blockage noted.
My questions 1 Could this be a logic board problem? 2. Could the pump motor be overheating and shutting down until it cools, than works fine? 3. Maybe the replacement pump was also defect?
For model number LDF7774WW
Hi Steve,
Thank you for your question. Sometimes the OE error code may be the result if a glitch in the electronic control board. This can be fixed by turning the power off to the dishwasher for 5 minutes. If the error code reappears after you have restored power to the dishwasher and you have already checked the pump, the hoses and the filters, then the electronic control board may be defective and you will need to inspect it. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bambi
April 18, 2019
Dw is just over 2 years old with very very minimal use. Would missing a fin (there were 4 but looks like one is missing) on this pump unit stop the pump from engaging to drain? Is there anything else that would prevent the drain pump from engaging? Or being able to test the pump? Dont want to have to replace parts that are not the problem, of not draining. This particular dw has a disposal built in, there is no filter in the bottom of the rack like the other dw's.
For model number model # LDS5040ST, serial # 509KWRE1S270
Hello Bambi, Thank you for the question. The missing fin should not effect the draining but if it broke off and got lodges or sucked into the pump, it could have damaged the pump. I suggest removing the pump and cleaning it out to see if there is anything causing a blockage. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angela
August 26, 2019
Dishwasher makes high pitched whistle noise when filling before washing and when rinsing. Washing, draining, and drying are all fine and quiet. What part do you think i may need to replace?Thank you,
angela
For model number LDF7774BB
Hi Angela, thank you for your question. You might want to take a look at your water inlet valve and inlet parts to see if there is something there causing this noise. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bambi
April 18, 2019
Dw is just over 2 years old with very very minimal use. Would missing a fin (there were 4 but looks like one is missing) on this pump unit stop the pump from engaging to drain? Is there anything else that would prevent the drain pump from engaging? Or being able to test the pump? Dont want to have to replace parts that are not the problem, of not draining.
Hello Bambi, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
David
June 12, 2023
The drain pump will run for a few seconds and pump a little water out then stop. It will pause for a few and start the cycle over until it times out. Once the water is out, it will run continuously until it times out. So I know the pump works, just not when water is present. I also took a towel and applied a little pressure to the spinning pump blades and I could hear it go faster due to the resistance. Can you tell me what part I need? Thanks
For model number LG ldf7551st
Hi David, thank you for reaching out. Based on the description that you have provided, we would recommend checking the drain pump assembly, part number PS11706890, to fix this issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11706890
Manufacturer Part Number: ABQ73503004
