This drum belt, often referred to as a drive belt, is used in the assembly of dryers. It goes around the drum, the idler pulley, and the motor pulley. As the armature on the motor spins, this belt is what rotates the drum and tumbles your clothes during the dry cycle. If you can hear the motor running but the drum is not moving, that is a sign your belt is broken, stretched, or damaged, and can no longer grip the drum. This belt is 88 3/4 inches long, and is 1/4 inch wide. Because it is made of rubber it is common for this part to become brittle and need to be replaced. This is an authentic OEM replacement part, and it is sold individually. Remember to unplug your dryer before you begin this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dryer Drum Belt
Troubleshooting
This part fixes the following symptoms:
Noisy | Drum Not Spinning | Marks left on clothes | Too hot
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rodney W - May 4, 2024
Verified Purchase
.
.
★★★★★
★★★★★
Keith B - November 1, 2023
Verified Purchase
Easy repair
Quality parts
★★★★★
★★★★★
Paul B - November 29, 2022
Verified Purchase
The best go to!
You guys are the best! Been using you for years.
★★★★★
★★★★★
Robin D - February 24, 2022
Verified Purchase
Drum belt
Thank you
★★★★★
★★★★★
Timothy M K - October 15, 2021
Verified Purchase
Perfect!
Got the part I needed the first time, and it fit perfect
★★★★★
★★★★★
Patricia C - August 5, 2021
Verified Purchase
Easy Repair - Mostly Cleaning out and dusting the inside of the Dryer.
Part was perfect. Dryer is working well! Repair videos are a nice plus! Thank you.
★★★★★
★★★★★
Manuel B - May 15, 2021
Verified Purchase
Part worked
The part was right and arrived quickly I was surprised they did a great job thanks.
★★★★★
★★★★★
Cheryl S - March 23, 2021
Verified Purchase
Drum belt worked as expected.
The part was in perfect condition, and with the change in belts the dryer worked like new.
★★★★★
★★★★★
Larry F - March 19, 2021
Verified Purchase
easy repair
part appears similar to original belt
★★★★★
★★★★★
Ronald W - February 24, 2021
Verified Purchase
Easy to do.
Great part.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 93 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy.
Had scape upper felt off of the drum edge but had to use a hacksaw to cut off the three plastic plates that were riveted to the upper felt replacement part. The old part number was131469100.
The new motor from parts select was not correct. The new motor is a bolt on. The original motor was a press on. Had to return at a cost of 42.00 dollars. Had to buy a new dryer.
I basically followed the video instructions on your website. Pretty simple but ran into an issue pre-threading the 3 self taping screws into the spindle bearing. The screws provided were blunt on the end and did not tap easily at all. I used the existing screws that were much more "sharp" and worked much better. Also, the new screws were
... Read morePhilips drive and due to the amount of torque trying to self tap nearly stripped them out. The old sharper screws were square drive which had a better bite. So basically, I used the old screws to self tap and then used the new screws for the final installation. It took a long time to clean all the lint out from the inside of the dryer. The motor was completely embedded with lint and animal hair. You may want to suggest that a good cleaning may be needed so bring a shop vac...and also something to carefully pick the lint balls out from around the motor armature and bearing area. Overall the video instructions were really a big help!
Had a squelch/squeak coming from the rear of the unit
I looked up a YouTube video on my specific model. Found one that said “basic disassembly”. I watched that and had it apart and back together in no time. Very easy to take apart and put new parts back in it. Re-assembled and since the repair no squeaking.
I followed the instillation instructions provided on your website. They were very informative and spot on. My only problem was my strength. I could not get the drum off of the rear bearing myself, but then I am a 61 year old female.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
26 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Blake
July 20, 2017
So I ordered a drum belt and a idler pulley for my dryer and none of the instructions say how to remove the front panel door to get at the parts. Can you help, thnks.
Hi Blake, to remove the front panel door you will need remove the top panel and then the control panel from your dryer. After these are out you can unscrew the front panel, and then remove the belt. To remove the tub, you will just pull it out of the front by lifting up and out. Good luck with this repair!
40 people found this helpful.
Was this helpful?
Thank you for voting!
Norman
July 20, 2017
How do you install this belt, what side goes against the drum?
Hi Norman, great question! You will need to remove the front assembly by releasing the clips from underneath the corners at the top. Once the front assembly is removed you can wind the new drum belt around the drum of the dryer. Should be fairly simple, but if you have any further questions please let us know.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Elsie
July 20, 2017
My dryer is not spinning and I’m not sure if it is the belt or the pulley. I’ve been reading about both, but can you give me more info?
Hello Elsie, you should try spinning your drum by hand. If it does not give off any resistance, that usually means your drum belt has snapped. To know for sure, we suggest checking the drum belt, but that is your most likely problem. I hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Kendra
January 6, 2020
My electric dryer is making a load screaching noise i think its one of the belts what are the proper belts
For model number DNSR475EY1WW
Hello Kendra, thank you for your question. The belt for this unit is PartSelect Number: PS1766009. If the belt is fine, the issue might be front drum bearing, rear drum bear, or drum glides. I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
May 6, 2019
Is the belt the only possibility for dryer mot heating? I have cleaned vent and basket etc
For model number CAQE7001LW0
Hi Tony, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
RALPH
December 12, 2018
Put in a new rear bearing assembly and new belt. I need instructions on how to put the belt on. The idler pulley and spring came apart and need to know where they go.
For model number GLER341AS1
Hello Ralph, Thank you for the question. Here is a link for the How To Video for the belt. Hope this helps!
https://www.youtube.com/watch?v=7d_a7wJekAs
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jorge
September 2, 2019
Heats up but wont spin?
For model number WGR211ES0
Hello Jorge, Thank you for the question. The most common reason for the drum not tumbling but still running and producing heat is a broken Belt, PartSelect Number PS1148434. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Karen
December 12, 2019
Is this the right belt for a GE pwsr483ga1ww dryer? Thank you!
For model number pwsr483ga1ww
Hello Karen, thank you for writing. It is not shown as compatible. The compatible replacement for your model is part number PS1766009. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Caroline
December 30, 2019
We bought the belt 134503600 and tried to install it but it seems too big. It’s the recommended part for our Frigidaire dryer, so what could be the issue?
For model number GLER341CES0
Hi Caroline, have you followed our install video: https://www.youtube.com/watch?v=7d_a7wJekAs&feature=emb_title ? If so I would double the part number that came in the packing, its possible you may have been shipped the wrong part. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Myrna
March 7, 2019
Is it normal to make a loud noise after you've replaced the drum belt?
For model number FASG7073NW2
Hello Myrna, Thank you for the question. If the belt is installed properly there should be no loud or unusual noises. Thank you for your inquiry, good luck with this repair!