Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Arlene M - November 24, 2023
Verified Purchase
great part
It got here fast and the gentleman that helped me was awesome..he took the time to look it up for me and my freezer door is working great...thank u
★★★★★
★★★★★
Norman C - September 14, 2018
Verified Purchase
Crosley Upright Freezer bottom Door open/close cam
It took the longest time to get the part.When it finally got here after three weeks,I was the wrong part !!! .So now i am stuck with a part that I cannot use ?! I have spoken to a different representative who seems to think he ordered the correct part for me on "special order" and should arrive in about three weeks. This freezer is less than two years old; it this part should be made of better material! This part is the bottom half of the bottom cam on the bottom door and this door is too heavy for this inferior part. I do not have any faith that if I happen to receive the correct part in three weeks that it will last any longer than this original one has lasted. P.S. Your parts diagram is very poor. Looking at it, I am not confident that I will receive the correct part this second time either/.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Closing cam was broken
Removed the top hinge, took the door off ,swapped out the new parts
Removed items from door. Put down blanket on floor. Remove top hinge cover. Removed small bolts. Open and lift door off bottom hinge. Put on blanket on side and remover screw holding upper closure. Installed new closure. Removed bottom closure and installed new closure. Reinstalled door and closed to frame. Reinstalled top hinge and bolts
... Read more adjusted door and tighten bolts. Reinstalled top hinge cover. For indicator light. Unplug unit and removed screws for kick plate. Removed light holder and removed terminals. Removed light and install in reverse order.