Idler Spring Arm WE03X20434
Fits your DBSR453EA0WW!
★★★★★
★★★★★
Fits your DBSR453EA0WW!
PartSelect Number PS10059168
Manufacturer Part Number WE03X20434
Manufactured by
GE
Product Description
Idler Spring Arm Specifications
This part, along with the idler pulley wheel, helps the belt to rotate the drum.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint, Whirlpool, Kenmore.
Part# WE03X20434 replaces these:
WE03M0017, WE3M17, WE3M25
Customer Reviews
Average Rating:
1 Review
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel M - September 15, 2018
Verified Purchase
Work with ease
Easy to install
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
September 11, 2021
Where does the pully go
For model number DBSR453EB0WW
Hello Robert, Thank you for the question. The Pulley goes onto the Idler Arm down by the Motor. The Belt runs on the Pulley. We suggest watching the How to Video on installing the Pulley. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Tracey
March 15, 2018
The belt broke so i bought a replacement but the idler pully doesn't seem to be in the right place...it is horizontally coming from the left and is not attached to the bottom of the dryer it seems. the video shows it vertical from the bottom and goes up and down...mine goes sideways. the belt won't loop tightly around the motor and the pully
For model number HTDX100EM6WW
Hi Tracey,
Thank you for your question. The video was meant as a reference to give you an idea of how to install the belt. Here is some information that a customer provided on how he installed the part, "1st - removed the two screws inside the front door panel. They are somewhat hidden up underneath so you may have to look for them. 2nd - I removed the top of the dryer cabinet by lifting it out of the clips holding it in place. 3rd - removed the two screws (one on each side) in the o=uppper corner of where the side panels connect the front panel. These are about 3/4" phillips head screws. Then the front panel could be moved to one side of the dry. 4th - remove the drum by lifting it up and out the open top area. 5th - add the new belt to the dryer tub (rib side towards the drum) and replace dryer tub to its original position. 6th - reaching in underneath the tub you need to pull the ideler pulley toward the center of the cabinet while laying the belt on the "outer side" of the ideler pulley and at the same time fitting the belt over the small pulley located on the motor. Once that is done, you reassemble in reverse order and should be good to go." I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Douglas
January 29, 2020
How do i tighten belt,dose idler pulley have a spring?
For model number Nvlr333ee2ww hotpoint
Hello Douglas, thank you for writing! Here is a link to how to replace the Belt: https://www.youtube.com/watch?v=5KFbBuscBVI&feature=youtu.be I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alex
January 20, 2018
My appliance was having issues drying clothes, along with being pretty noisy (clunky, and squeaky). When drying clothes I would have to run the dryer about 3-4 times to get the clothes dry. So I pulled the dryer apart and it had clearly never been taken good care of. It was filthy, clogged up with lint everywhere, the duct seal was in shreds, and the dryer slides were disintegrated. So based on everything I read on here, I replaced those, and i even opted to replace the drum slide bearing, the drum belt and even the rear bearing kit. Now it is still squeaky. I did not lube the bearing in the rear, because the instructions did not say to do so. The first 10-20 minutes of the dryer running was like a dream, but then it got clunkier sounding toward the bottom and the rear. I pulled off the top, the belt is spinning the drum perfectly fine. The idler arm on the pulley seemed a little loose but I was unable to find any videos on what it should look like. The motor was clean, and the drum is spinning. The pulley wheel does move back and forth on the arm though and does have old lubricant on it. The back of the machine did not seem to have any issues. I was going to consider replacing the lint trap duct assembly because it had some slight head cracks, but other than that I cannot see any other obvious damage.
For model number DPXR473EW0AA
Hello Alex,
Thanks for your question. The pulley may be responsible for the grinding and squeaking, especially given how loose it is. You may want to consider replacing it. With the lint duct being damaged, that may be worth replacing as well.
I hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10059168
Manufacturer Part Number: WE03X20434
Manufacturer Part Number: WE03X20434
Brand
Model Number
Description
Back to Top
Idler Spring Arm
$
90.11
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.