Models > 61140418

61140418 General Electric Dryer - Overview

Sections of the 61140418

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White – Part Number: WE1M504
Drum Bearing Slide - White
★★★★★
★★★★★
(155)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$17.00
  In Stock
Order within the next 10 hrs and your part ships today!
Drum Bearing Slide - Green – Part Number: WE1M1067
Drum Bearing Slide - Green
★★★★★
★★★★★
(27)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$11.49
  In Stock
Order within the next 10 hrs and your part ships today!
Rear Drum Bearing Kit – Part Number: WE25M40
Rear Drum Bearing Kit
★★★★★
★★★★★
(17)
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep yo...
$67.72
  In Stock
Order within the next 10 hrs and your part ships today!
Door Handle - White – Part Number: WE01X20419
Door Handle - White
★★★★★
★★★★★
(60)
PartSelect #: PS9494490
Manufacturer #: WE01X20419
This part is on the outer door of the dryer.
$20.68
  In Stock
Order within the next 10 hrs and your part ships today!
Drive Belt – Part Number: WE12X10014
Drive Belt
★★★★★
★★★★★
(24)
PartSelect #: PS2350043
Manufacturer #: WE12X10014
This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.
$26.19
  In Stock
Order within the next 10 hrs and your part ships today!
Idler Pulley Wheel – Part Number: WE12X83
Idler Pulley Wheel
★★★★★
★★★★★
(6)
PartSelect #: PS265721
Manufacturer #: WE12X83
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
$31.73
  In Stock
Order within the next 10 hrs and your part ships today!
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$12.87
  In Stock
Order within the next 10 hrs and your part ships today!
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(17)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$23.70
  In Stock
Order within the next 10 hrs and your part ships today!
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(7)
PartSelect #: PS266893
Manufacturer #: WE1X1192
The door strike for your dryer is mounted on the dryer door. It fits into the door latch and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not on...
$8.63
  In Stock
Order within the next 10 hrs and your part ships today!
Door Switch – Part Number: WE4M415
Door Switch
★★★★★
★★★★★
(5)
PartSelect #: PS2344321
Manufacturer #: WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$28.72
  In Stock
Order within the next 10 hrs and your part ships today!
Foam Seal – Part Number: WE1M825
Foam Seal
★★★★★
★★★★★
(1)
PartSelect #: PS2577674
Manufacturer #: WE1M825
This is 39 inches long.
$12.35
  In Stock
Order within the next 10 hrs and your part ships today!
Heating Element and Housing – Part Number: WE11M23
Heating Element and Housing
★★★★★
★★★★★
(8)
PartSelect #: PS265565
Manufacturer #: WE11M23
Note: The insulators on the housing are NOT sold separately.
$163.83
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for 61140418

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 61140418

[Viewing 12 of 12]
Noisy
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Door latch failure
Fixed by
these parts
Show All
Timer will not advance
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Heater element went out
First of all, unplug the dryer. I removed the two screws on the front of the cabinet to remove the top. I then took out the screws to remove the dial panel. Release the belt for the drum through the access hole in the rear of the dryer. Remove the front cover and pull the drum assembly out.

Remove the element disc from the rear of the housing, take note of the the wireing placement. Replace disc and reverse order of disassembly.

This job was easy for me as I am a tinkerer by nature. The hardest part of the whole job was waiting on the part, which by the way was ordered on a Sunday evening and I had the replacement in my hands and back in the dryer running by 1:00 PM on the following Tuesday!

I book marked this website and WILL refer it to others who simply need a repair, not a costly new appliance!
Parts Used:
Heating Element and Housing
  • Brian from Clinton, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
175 of 210 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer belt broke
first I took the dryer apart 1st thing i did was unplug the power supply (safety first) then I removed the top of the unit then removed the front cleaned all the lint from the inside of the cabinet I found the proper belt size on part select.com the next day I had my dryer belt delivered (which cost 1/3 the price of the local repair shop price)
then I placed the belt over the dryer drum and made sure it was in the general location it should be I then replaced the front cover and the top. then I removed the rear cover which was held on by six 5/16 sheet metal screws which gave me access to the drive pulley and belt tensioner the belt goes on by going under the tensioner then around the drive pulley
Then i rotated the drum by hand to make sure everything had clearance I then buttend everything up plugged it and started it up it workd fine and I figure Ill get another 8 years out of it
Thank you partselect.com
Parts Used:
Drive Belt
  • Matt from La Belle, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
151 of 178 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer door handle broke off.
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
Parts Used:
Door Handle - White
  • Jim from North Richland Hills, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
90 of 110 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!