10044036-1-M-Walbro-D10-WAT-Kit - Gasket/Diaphragm
Part Location Diagram of D10-WAT Walbro Kit - Gasket/Diaphragm
See part 60C in the diagram
10044036-1-S-Walbro-D10-WAT-Kit - Gasket/Diaphragm 360 view
( Grid squares measure 1x1 inch )
10044036-1-S-Walbro-D10-WAT-Kit - Gasket/Diaphragm 10044036-1-S-Walbro-D10-WAT-Kit - Gasket/Diaphragm 360 view
Part Location Diagram of D10-WAT Walbro Kit - Gasket/Diaphragm
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Kit - Gasket/Diaphragm D10-WAT

 Fits your 23L!

Rated by 1 customer 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.71
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 23L!
PartSelect Number PS10044036
Manufacturer Part Number D10-WAT
Manufactured by Walbro
Troubleshooting
This part works with the following products:
Engine, Chainsaw, Trimmer.
This part works with the following products:
Walbro, Poulan, Husqvarna, Weed Eater.
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fuel line deterioration and carb overhaul
The machine was offered for free on FB marketplace. The person tried a rebuild of the carb, but could not figure out how to connect the fuel line, which feeds from the tank above the carb. I couldn’t either, so I went to a local parts dealer, who could not find a diameter the same size (it’s tiny). I assumed there may have been a fitting in the tank, but if so, it was absent. The only parts that were found in the tank: a large filter in a 3/4”piece of larger tubing and this tiny fuel line was inserted into the other end. The resulting arrangement was long enough to reach the hole in the tank.Since the machine looked spectacularly clean, I used these parts to make it run.

1. Using diagonal cutters, I cut a very sharply angled end on the small line.

2. I generously lubricated the new line and the hole in the tank. I then took angled end of the new line and inserted it into the hole. Using a screwing type motion , I slowly worked it into the tank, using generous amounts of lubricant, until the line was far enough into the tank to grab from the fill hole with needle nose pliers. I then pulled and twisted until the line came out of the top of the tank.

3. I cut the angled end square at this point. I then inserted the filter into the larger tubing the cut about an inch longer than the filter Barb.I then lubed the larger line and the smaller line and pulled the line back into the tank from the bottom until the filter laid flat on the bottom of the tank.

4. At this point, I cut the end of the small line so that about an inch protruded from the bottom of the tank. I then re-lubed that line and inserted into a well lubricated length of larger line of sufficient length to reach the inlet on the carb.

About the carb: the donor of the machine had apparently attempted a rebuild. While it was very clean, he assembled it incorrectly. The metering diaphragm was pinched and he left off two of the four screws which held it together. I disassembled it, and using the correct parts assembled in the correct order, (there are parts for multiple applications included in the kit), mounted it back to the machine, and after about six or eight pulls, it roared to life. I did not get into the jets etc, because they seemed to work. This Walbro carb only has one inlet and no purge bulb, and after adjusting the carb it starts on the third pull every time using the choke as it was designed to.
Read less
Other Parts Used:
Kit - Gasket/Diaphragm Fuel Line
  • Edward from FREDERICKSBRG, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10044036
Manufacturer Part Number: D10-WAT
Brand
Model Number
Description
Poulan
033
Trimmer - Poulan String Trimmer Model 033 Parts
Husqvarna
1062520-61
Trimmer - Husqvarna String Trimmer Model 1062520-61 (106252061, 1062520 61) Parts
Husqvarna
122HBV
Leaf Blower / Vacuum - Husqvarna Leaf Blower Model 122HBV Parts
Poulan
131
Trimmer - Poulan String Trimmer Model 131 Parts
Poulan
1800 SUPER
Chainsaw - Poulan Chainsaw Model 1800 SUPER (1800SUPER) Parts
Poulan
1900 LE
Chainsaw - Poulan Chainsaw Model 1900 LE (1900LE) Parts
Poulan
2075 LE
Chainsaw - Poulan Chainsaw Model 2075 LE (2075LE) Parts
Poulan
2150 PR
Chainsaw - Poulan Chainsaw Model 2150 PR/TYPE 1 (2150PR/TYPE1) Parts
Poulan
2150 PREDATOR
Chainsaw - Poulan Chainsaw Model 2150 PREDATOR/TYPE 1 (2150PREDATOR/TYPE1) Parts
Poulan
2150 PREDATOR LE
Chainsaw - Poulan Chainsaw Model 2150 PREDATOR LE/TYPE 1 (2150PREDATORLE/TYPE1) Parts
Poulan
2150LE PREDATOR
Chainsaw - Poulan Chainsaw Model 2150LE PREDATOR/TYPE 1 (2150LEPREDATOR/TYPE1) Parts
Husqvarna
22HB
Leaf Blower / Vacuum - Husqvarna Leaf Blower Model 22HB Parts
Husqvarna
232RJ
Trimmer - Husqvarna String Trimmer Model 232RJ/2000-04 (232RJ/200004, 232RJ/2000 04) Parts
Husqvarna
235RL
Trimmer - Husqvarna String Trimmer Model 235RL Parts
Husqvarna
23C
Chainsaw - Husqvarna Chainsaw Model 23C Parts
Husqvarna
23COMPACT
Chainsaw - Husqvarna Chainsaw Model 23COMPACT Parts
Husqvarna
23LC
Trimmer - Husqvarna String Trimmer Model 23LC/1991-04 (23LC/199104, 23LC/1991 04) Parts
Husqvarna
23LCN
Trimmer - Husqvarna String Trimmer Model 23LCN Parts
Poulan
2500LE
Chainsaw - Poulan Chainsaw Model 2500LE Parts
Poulan
260
Chainsaw - Poulan Chainsaw Model 260/TYPE 6 (260/TYPE6) Parts
Poulan
260 LE
Chainsaw - Poulan Chainsaw Model 260 LE/TYPE 1 (260LE/TYPE1) Parts
Poulan
295
Chainsaw - Poulan Chainsaw Model 295/TYPE 3 (295/TYPE3) Parts
Husqvarna
530083963
Chainsaw - Husqvarna Chainsaw Model 530083963 Parts
Weed Eater
GTI16 SUPER
Trimmer - Weed Eater String Trimmer Model GTI16 SUPER (GTI16SUPER) Parts
Poulan
PATRIOT 1900
Chainsaw - Poulan Chainsaw Model PATRIOT 1900 (PATRIOT1900) Parts
Poulan
PP190
Chainsaw - Poulan Pro Chainsaw Model PP190 Parts
Poulan
PP205
Chainsaw - Poulan Pro Chainsaw Model PP205 Parts
Poulan
PP225
Chainsaw - Poulan Pro Chainsaw Model PP225 Parts
Poulan
PRO033
Trimmer - Poulan String Trimmer Model PRO033 Parts
Poulan
S31BC
Trimmer - Poulan String Trimmer Model S31BC Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Kit - Gasket/Diaphragm
$ 9.71
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.