MDB9150AWS Maytag Dishwasher - Instructions

We took the hoses off, cleaned all the hard water deposits and screens. The water would fill once but not a second time. We ordered the water valve and valve switch. We put the new water valve on and "miracle" it worked perfectly. We didn't need to replace switch. Let me tell you this is one happy housewife now. Ordering the parts on-line was very easy and they arrived as they said they would. Thanks for the great service.

Replaced The part. Picked up the old one and repurposed it in the work shop and dropped in the new one ...no tools needed. The real story here is that this web page existed and I was able to get the exact replacement part I needed delivered to my house.Piece of cake,

Replaced silverware basket. Works as designed. Speedy part delivery and great service!

The hardest part was figuring out how to get the dishwasher out from the cabinet. Your instructional video said "no tools are needed" but that turned out to be untrue.

removed old rack removed spray tower by twist of my hand reinstalled same and placed lower dish rack back in the dishwasher. It was just hat simple.

I had to get my son to twist off the spray tower, the otherwise the transition to our new racks was quite easy. I did have to look up on the internet Maytag site how to get the spray tower off and how to install a side piece on the upper rack. Easy to do however.

Ordered parts and referred to exploded component drawings on the website to install replacements. Videos were helpful. Be careful to check all plastic parts for deterioration so that you can order them all at once. I had to make two additional orders for rollers and retainers that looked fine, but were brittle and needed replacement.

replacing the rack was easy - but first we had to swap out the plastic spay tower that twist-locks onto the new rack. My smart wife figured this one out, despite the lack of any trace of instructions (the less astute amature repairperson would have mangled the whole shootin' match attempting to make the change); that said, the rack was not a "one-to-one" match, as it lacked the original's high left sidewall and a few other minor differences that did not affeect the overall performance of the part - a not uncommon occurance in the aftermarket parts world.

Removed top basket. Removed old mounting wheels. Installed new wheels on mounting strip. Re-installed basket.

Vidio was all i needed.

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

replaced strip and wheels. Trick was getting the strip off w/o any instructions on how to do so. There was a trick -- remove an end cap using a screw driver to free a latching tongue-- that worked once I figured it out.

Placed it back together. Part select was right on time and used this companys site for yrs

did not even tell me that i had to order 2 packs of wheels with a little patients saw how to remove all 4 wheels to disassemble and re mount new parts Mounting bar replaced on r side is just carfully lined up and will come out of rack side and in reverse order carefully with out forcing replace 2 small V shaped parts must be lined up with their respective holes

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!