MDB6658AWB Maytag Dishwasher - Instructions

Removed the upper rack rail stops. Removed the upper rack by pulling outward until the rack rollers cleared the rails. Attached the new roller on the upper rack. You can look at the other undamaged rollers to see how they lock into place. re-install the upper rack by feeding the upper rack rollers back onto the rails. Install the rail stops back into the rail ends,and the job is complete. VERY EASY!

I had to call an appliance repairman to come fix it. If I would have been able to pull the dishwasher out, it would have been a simple fix. It would not come out and I loosened to water line trying therefore causing more problems.

I had to cut the old rack for 2 axles and add 2 wheels from the old rack to the new one that was sent. the new one had 2 less wheels.I used white zip ties and wheels from the old rack. Placing the wheels in the right place I used the zip ties to hold them in place. Without the extra wheels like the old rack had the new one would fall into the bottom of the dish washer. Working just fine so far.

Top holder was turning black and disintergrating. I orderder the part and the box arrived but I havem't had time to install it

ordered the basket and put it in its place.

I ordered the basket on Sunday and received it on Tuesday. It is a better basket than what originally came with the dishwasher. Very happy with the prompt delivery and service.

Extremely easy to repair. I can't believe I didn't do this earlier.

I Googled parts for an Electrolux wheel and Parts Select came out with a picture that confirms the one that I need. The price of the item was very reasonable as compared to the official website of the manufacturer. I like what I saw and bougt 4pcs instead. I will recommend Part Select to my friends without hesitation.

replaced mounting strip and two wheels

I found a short video on YouTube that showed me how easy it was to remove the old dishrack and install the new one. I would have never figured out how to get old diskrack out without watching short video clip. And, all I needed was my fingers to undo the end clips.

Once I identified the model number it was really easy to spot the right part numbers I needed for my repair, the ordering system was easy and in a few hours a I got my order shipment information, the service was absolutely superb, the parts snapped in without problem and in a few minutes I got my dishwasher back in good operating condition.

I removed the old pieces and snapped the new ones into place. For one part I watched the online tutorial to make sure that I did the replacement correctly. It was all very easy. The delivery and installation took less than 24 hours. I couldn't have gotten a repairman that quickly.

remove panel on front to acess float @ float switch.Remove phillips screw to float switch,remove palnut from float shaft with 5/16 nutdriver.Remove float from inside washer.Reinstall new parts reverse order.