JDB9910AWB Jenn-Air Dishwasher - Instructions

First of all I don't know how you got the part here in one day. Second, I am glad I watched your video, otherwise I would have never seen the gasket tucked in the groove.Discharge pump housing had come apart inside dropping a round disc onto the impeller causing the noise and poor performance. Nice job guys!!!! thanks again. I will always use you now. Scott Seminole fl

I found the part, ordered, it was here the next day!!! I couldn't believe it, so much faster than a repair man. We opened the package opened the DW door, slipped it right into place under the plastic holder. I wish now I had ordered more parts to make everything look Brand New.

The ironic thing is it wasn't broke! I had ordered new rollers, new belt and new tensioner, before I took the front off. The video was helpful. The tough part was reinstalling the tensioner as it did not screw down. But live and learn. I set the tensioner in place and used small wire to bring it over to the moter drive, then assembled the new belt together and cut the retaining wire.

replaced Discharge pump housing and gasket best to use new gasket when ever replacing something only $5-6 dollers more

Ordered a plastic part from supplier and installed the part, door works fine now.

with ease

Removed lower dish basket, removed the two original peg clips,then snapped in the two new peg clips and adjustable prong assembly worked as required. No further problems experienced. Appreciated the rapid receipt of parts. Will definitely remember this web site for future appliance parts.

I used video instructions from site, and the repair went smoothly

Disassembled spray arm the way the website describes. Found an amazing accumulation of scale and soap scum. Everything was seriously gunked up. Cleaning and rodding out the spray arms and pump housing screens takes a minute. Be careful not to break or puncture the screens. Dont try slapping the pump housing filter on the driveway. Its brittle and will break. Suggest buying a new one anyway. Its nearly impossible to clean. Simply clean it all up and re-assemble. Oh and bask in the praise from your wife.

After viewing usless videos, I finally read other comments and discovered how easy it was to just twist the sprayer.

Changed float switch to no avail! Ladeled out the water. Disassembled the entire pump unit inside down to the motor shaft and checked all pieces for trouble. Could find nothing wrong. Now trying to determine if the problem is in the timer or motor.

Easiest ever. Recycled the old one and put the new in its place. We are trying to place the silverware in, rather than dropping it in. It was suggested in the video from this website.

Watched video, very helpful. Pulled dishwasher out a foot from counter, which was the most difficult part due to tight fit, carpet, and copper tube water connection. Once the washer was out it was easy to replace the linkage and while it was out did both sides.

I pulled out the dishwasher. Saw that a plastic part linking the door and spring was broken.I was able to ID the part easily on PartSelect. The part came quickly and was installed within 30 minutes. Dishwasher feels like new.

Found picture of the "stack" of pieces online. Decided to give it a try and started disassembling the parts. When looking for replacement parts, found the video @ PartSelect. Wish I had seen it before, but it confirmed I did everything right. It was refreshing to see a step by step instructional video, made everything look easy and it was! Replaced the part and followed the suggestions of the video about replacing the gasket as well and what parts to clean while working. Great help. Very pleaased with the speed of the whole process. Ordered the piece on Sunday, had it on my doorsteps on Tuesday!