Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JDB9910AWB > Instructions

JDB9910AWB Jenn-Air Dishwasher - Instructions

All installation instructions for JDB9910AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JDB9910AWB
571-585 of 706
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Top right hand wheel gadget needed to be replaced

  • Customer: SHIRLEY M. from WEYMOUTH, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Watched video you have on the site.... also read the first person's description - both very helpful...since I am 75 y.o.and a woman got my chair to sit and did exactly step by step and actually did it! So happy I wouldnt have to buy a new dishwasher YET - Emailed my friends and said if and when they need wheel replaced I can do for them!!! Thanks for all the help on site.

Plastic door handle broke off

  • Customer: John F from Pawleys Island, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws on the back of the D/W door, remove existing screws from broken part, screwed the new handle into place, replaced the screws on the D/W door. Probably saved $60 - 75 for a service visit.

grinding

  • Customer: Kelly from Muskegon, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
followed your video awesome site thanks

Rusted bottom rack bowl/plate holder

  • Customer: Katherine from Grand Ledge, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Rusty part snapped out, new part snapped in! No tools, less than a minute from start to finish

Noisy dishwasher

  • Customer: Thomas from Knoxville, TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Took apart per video on Part Select found broken piece. Ordered new part and replaced 4 days later.

bottom of basket was broken

  • Customer: donald from arnold, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
replaced basket with a new one, so easy even a cave man could do it.....i think.......

would not pump water in the machine.

  • Customer: Della from Nauvoo, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
look the instrution on line and it worked great.

old broken silverware basket

  • Customer: Vincent from Laurel Springs, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I put the new one in and that was all

Heard a grinding noise when the dishwasher was running

  • Customer: Robert from Key West, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I twice watched the 5 minute video on PartSelect on how to repair the Discharge Pump Housing. I disassembled as instructed. One thing I did that the video did not suggest is that I marked the alignment of all parts with a pencil before removing any screws. In the end it only mattered on the main housing that covers the filter. That has to be put back on the way it came off. The repair is complete and for under $50 the dishwasher is running great and quieter than I can ever remember.

Suspected Door Springs broken

  • Customer: Charles from Titusville, FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
After I got the new springs, I pulled the dishwasher out and the springs were fine but the little plastic piece that attaches the spring to the door was gone. So now I had to order the that piece and wait again.

spray arm would not stay in place

  • Customer: Gwen from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just snapped in plastic retainer and works just fine now

Part worn out, needed to replace

  • Customer: Ronald from Tulsa, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
No repair, just an replacement. Would recommend this company for good service.

weak spray was leaving the dishes uncleaned

  • Customer: Edward from La Habra, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
removed the lower dish basket; used pliers to undo the lock screw. removed the lower spray arm, transfered heat shields from old part to new, replaced the lower spray arm, hand tightened the lock screw, replaced the lower dish basket....DONE!

Handle replace

  • Customer: James from Calabash, NC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Handle was easy to replace and parts was prefect fit.

The door of my may tag dishwasher fell down

  • Customer: francesco from teaneck, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I replace 2 springs in 10 minutes works very nice. thank you.
All Instructions for the JDB9910AWB
571-585 of 706