JDB8910AWS Jenn-Air Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top tray had broken wheels
removed old rail replaced wheels and was good to go
Parts Used:
-
John from Roy, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Roller broke on RH side of upper dishwasher rack.
Roller broke on RH side of upper dishwasher rack. No roller replacement kits for this part were available. I purchased a roller for another model dishwasher. This roller came with a bracket that wasn't compatible with my dishwasher. I modified the bracket by cutting it with a utility knife. I also had to trim the hub of the roller about 1/4" I then used a 10-32 hex head screw and locknut and mounted the roller and trimmed bracket to the bracket on the dishwasher rack. Knowing what I have to do - the next time I do this it should take about 15 minutes.
Parts Used:
-
Frederick from Greenville, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Wrench set
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking at the gasket seal
There were no instructions with the rubber gasket seal . The gasket kept popping off. Finally got it to stay and it still leaked. We actually siliconed it in.
Parts Used:
-
Shirley from New Berlin, WI
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Wrench set
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced broken plastic clips on pivoting rack
Despite being rather "un-handy" around the house, I was able to do the repair in just a few minutes with no tools and no new damage. First I carefully noted which plastic clips were in each position on the tray, drawing pictures before removing the old pieces. Then I unsnapped the pivoting rack from the broken clips, removed the broken clips, inserted the new clips, and re-attached the pivoting rack.
Now it works!
Now it works!
Parts Used:
-
Steve from Vienna, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud noise & water would not dscharge
removed racks disassembled lower unit as per diagram -reassabled
Parts Used:
-
Rodney from Hamburg, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump cover was gunked up needed yo be replaced
replaced wiyh new parts
Parts Used:
-
scott from budd lake, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer was not filling with water on the rinse cycle.
I removed the access panel and it was right there. one screw - disconect the wires & it was out. then right back in - access panel on, and done.
Parts Used:
-
Robert from Rochester, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tines wouldn't stay up
-
Leonard from Williamstown, VT
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
parts simply wore out and were melted
-
craig from Coral Springs, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part of the Tine Latch had broken
First I watched the online instructional video, then removed the broken piece, (no tools required), snapped on the new piece for a total of maybe 5 min. Easy. Even though the postage was more than the actual part ordered, it was great & prompt delivery service and the website has enough information to make you confident you are ordering a part that is compatible with your appliance.
Parts Used:
-
Henri from Bentonville, AR
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
2 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic fold away clips became worn and broken.
Replacement of the fold away clips is easy and simple. There are no tolls required to make the repair. Simply unsnap the old fold away clips from the dish basket and reinsert the new clips by snapping them in place as the originals were installed by the manufacturer. In only a few minutes, the tine latches are replaced and you are set to go with configuring the dish basket. As mentioned earlier, simple, fast and a snap to do.
Parts Used:
-
John from Whiting, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts broken
installed new parts
Parts Used:
-
Richard from Tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
0 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack corrosion
pull out rack and install new one--no tools
Parts Used:
-
Stanton from Las Vegas, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle and door cable were broken
Had to take door apart to put new handle on, and then pull out the unit from cabinet to put on the new cable. But door do longer slams open. So Happy that it is now fixed.
Parts Used:
-
Matthew from Morris, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
2 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rack and spray unit damaged by accidental fall of guest
R & R parts....good as new.
Parts Used:
-
Timothy from Palm Beach Gardens, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!