Kenmore Microwave Caps and Lids
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular Kenmore Microwave Caps and Lids
Wave Guide Cover
PartSelect Number PS1993100
Manufacturer Part Number 5304462314
PartSelect Number PS3560669
Manufacturer Part Number 3550W1A126D
Mike from PINEY FLATS, TN
The fan cover in top of the cooking area was burned.The original cover was burned and actually caught on fire. Research informed me that food can splatter and stick to the cover. The particle will get hot enough to ignite the plastic cover. I ordered the cover and included the fan since it was so cheap, Replacement was super easy. Done in 10 minutes and made my wife happy. She was ready to buy a new microwave because she thought something was wrong with ours but food splatter was the cause. Parts were less than $10 + $6 shipping. Keep the inside of the microwave clean!! Read more...
PartSelect Number PS979653
Manufacturer Part Number 5304440845
Fixes these symptoms
- See more...
amy from corona, CA
Wave guide cover was cracked. Oven started to spark and make popping noises when in use.Part arrived in one day. Old part snapped right out and new snapped right in. One minute repair with no more sparking and no need to invest in a new microwave... which is what I thought I was going to have to do. Read more...
Wave Guide Cover
PartSelect Number PS228021
Manufacturer Part Number WB06X10311
Grafals from Collingswood, NJ
The wave guide cover gets caught on fire when using microwave.First removed the screw that holds the cover. Replace it and put the screw back on. Se acabó. So easy. I will go easy using harsh detergents that may had damage the cover. Read more...
PartSelect Number PS3518032
Manufacturer Part Number 3052W2A021C
PartSelect Number PS3518031
Manufacturer Part Number 3052W2A021A
PartSelect Number PS3549494
Manufacturer Part Number 3052W2A021D
PartSelect Number PS227845
Manufacturer Part Number WB06X10130
john from LAGUNA NIGUEL, CA
Had a fire in M/W, melting the film and also the spinner coverRemoved old film, installed new horizontally and pulled it downward (match it along the top first). The cover required 2 "hooks" to be removed, only needed 4 clips. Used a screwdriver to remove the 2 clips. Read more...