Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 19, 2017
Where is the screw to adjust the oil flow on to the chain you said i could have just that screw where is it
For model number Cs-500vl
Hello John, Thank you for your inquiry. You have to turn the saw on its side, it's directly below the clutch cover. There are YouTube videos available to assist you with adjusting the oil flow. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
December 18, 2017
Does this older cs500 vl have automatic chain oiler when you cut wood this one is an older model in the 80s i notice when i start this i don't have any oil on the chain of course i'm not cutting wood but by starting it and running it shouldn't it oil the chain was given this thing and yes there is oil in the oil tank
For model number CS-500VL
Hello John, Thank you for your inquiry. It is supposed to release automatically release the oil to oil the chain. You can adjust the oil output manually by turning the oil adjusting screw counter clockwise on the left side. You can check the oil strainer and seals to make sure they are not clogged. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
