Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nancy A - September 8, 2019
Verified Purchase
Fast shipping. Easy repair. Part fit perfectly
This part was easy to locate, order, and install! Shipping was prompt. Order and install with confidence
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burned and melted stirrer fan cover
Check YouTube videos to confirm this process if needed. First, be sure you get the rivet in case you need it. Mine was melted and that was not obvious at first glance. The cover was melted and sagging down and that couldn't be missed! Use your fingernail to get under the rivet head and just pop it off. Twist the cover a littl
... Read moree and it comes off, along with the fan. That was a surprise. Be gentle with the fan. Put this fan inside the new cover, put the cover in place using the cover feet for alignment and put the rivet back to hold it in place. The rivet comes with a socket to go on the inside of the cover. Remove the socket and put in into the chasis, install the cover, and pop the pin in place. Takes almost no time to do and sure looks better.
Both covers were destroyed when the oven was on without any food inside.
Both new parts were installed simply by snapping them into the holes used by the old covers. What I did need was the single round headed push pin used to hold each cover in place after they were snapped into their respective mounting holes but, none were supplied with the new covers. Luckily, I was able to secure the old pins from the dam
... Read moreaged parts that I had held onto and used them to secure the new covers. New pins should have been supplied with the new covers.