Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
April 7, 2022
HE error. I ohm tested the heating element Okay. Is there a heating sensor or thermistor and a heating relay that can be purchased. Thanks
For model number LDF7551ST
Hi Tom,
Thank you for your question. The HE error code usually means that there is an issue with the heater circuit. There is no sensor or thermistor listed for your washer. If you have tested the heating element and it tested okay, try adjusting the temperature of the water coming into the dishwasher to see if this resolves the issue. If not, try resetting the dishwasher but cutting power to it for 10 seconds and plugging it back in. Then start a new cycle to see if the code will appear again. If it does, check for any loose or damaged wiring. Also check the electronic control board. It may have a burnt relay. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.