Part Location Diagram of 5221EA1008F LG Water Inlet Valve Assembly
See part A180 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Inlet Valve Assembly 5221EA1008F

 Fits your WT1101CW!
★★★★★
★★★★★
22 Reviews

Rated by 2 customers 

Very Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 160.04
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WT1101CW!
PartSelect Number PS3527446
Manufacturer Part Number 5221EA1008F
Manufactured by LG
Product Description

Water Inlet Valve Assembly Specifications

This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 5221EA1008F replaces these:
AP5244606, 5221EA1008N, TAW35618287
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
5.0
Filter By Rating:
  • 5 Stars
    21
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking into drum
Figured out how to remove the top door and the top panel that covered the solenoid bank. That was the hardest part. Swapping out the solenoid bank and the connector was easy. No more water leaking.
Other Parts Used:
CONNECTOR ASSEMBLY Water Inlet Valve Assembly
  • Richard from RED LION, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old water assembly valve split on the bottom and started leaking.
After unplugging the washer I cut the water off. I took the water hoses off, then the back top panel using a phillips head screw driver. I then used a pair of pliers to take off the two hoses and clamps. I unplugged the electric connection on each solenoid, took out 5 screws replaced the part and did everything in reverse order. Problem solved. Thanks for the fast service on my order.
  • Jerry from CARYVILLE, TN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

23 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Billy
November 19, 2017
There is water leaking into the tub and in the floor. The washer is not in use. Could the be the valves. Part 180 on the diagram i looked at? Thanks for your help.
For model number WT1701CW
PartSelect logo
Hi Billy, Thank you for your inquiry. If the washer is leaking when it is not in use, then you will need to to check the water inlet valve. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Les
February 6, 2018
Dear sirs, when the tub begins the fill cycle there is a leak at the connection between the fill hose(cold) and inlet valve. The hose and washer are in good condition. Could the inlet valve be causing the leak? Thank you in lodi, ca
For model number WT1101CW
PartSelect logo
Hello Les, thank you for your question. Yes, it is possible the valve is the issue. I would recommend replacing the inlet valve. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Dessie
February 22, 2018
I need help trying to figure out what part I need for my washer. It continues to fill up with water and not stop. It flooded my wash room. I have to turn off the water to the washer to make it stop but only the cold water. Can you please help me? Thank you.
For model number WT1101CW
PartSelect logo
Hi Dessie, Thank you for the question. I suggest changing the valve assembly. Sounds like the cold port is stuck open and the valve will need to be replaced. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dan
February 25, 2020
My washing machine overflowed. The water is going into the tub even when the washer is off. I checked the solenoids on the water inlet valve, and all showed continuity. Could the inlet valve still be bad even if all solenoids showed continuity?
For model number WT1101cw
PartSelect logo
Hello Dan, thank you for your question. If the water is coming into the tub when the washer is off the valve would be the issue. It is possible that the valve testing is off. We would recommend starting the unit and unplugging it from the wall while it fills. If the water continues to come in, the valve needs to be replaced. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
October 29, 2019
Water will not shut off in the rinse cycle, even if I hit pause it still fills. Even with washer off water still fills. FYI I just replaced the water inlet valve assembly and it still does this. If you can help thanks
For model number WT1001CW
PartSelect logo
Hello Rick, Thank you for the question. If the new valve did not fix the issue, this could be a Pressure Switch Assembly Sensor issue. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sonny
April 14, 2023
My washer is leaking Water from the rear of the machine water appears to be leaking near the water intake valve more to the right near the power source
For model number Wt7300cv
PartSelect logo
Hi Sonny, thank you for reaching out. The issue is probably due to the water inlet valve, part number PS12580369. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Japeth
April 27, 2023
i have leaking coming from the rear at the top from the plastic does this mean that this part is going bad
For model number wt5270cw
PartSelect logo
Hi Japeth, thank you for reaching out. Based on the description that you have provided, we would recommend checking the water inlet valve assembly, part number PS3527446, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
June 7, 2023
Need to replace inlet valve but can’t remove top back panel to access the valve. I removed two screws but still won’t move. How do you remove this panel?
For model number WT1501CW
PartSelect logo
Hello John, thank you for your inquiry. We have found some relevant instructions for you to replace the inlet valve, part number PS3527446. They may not be of the exact same model, but they will help you with the installation. You may follow the following steps: unplug the power cord and shut off the water supply. Now use a Phillips-head screwdriver to unthread the screws securing the rear control panel. Lift the panel up to remove it. Next, detach the control housing and remove the hot and cold water supply lines from the inlet valve. Note the orientation of the wires connected to the valve, and then disconnect them. Next, release the retaining clamps securing the hoses to the valve and pull the hoses off. Remove the mounting screws securing the valve to the control base. Lift the old valve and pull it free of the dispenser assembly. We hope this information helps!

Was this helpful?
Thank you for voting!
Joe
April 4, 2018
How do you repair water inlet value
For model number WT1101CW
PartSelect logo
Hello Joe, thank you for your question. unfortunately, we do not currently have installation instructions for this particular part. However, I was able to find another video on our site that shows how to replace a similar valve. The appliance and valve may look different in the video to what you have but the installation should be very similar. I hope this helps! https://www.youtube.com/watch?v=MMq7jHIAKZo

Was this helpful?
Thank you for voting!
Mike
January 11, 2018
Water is leaking from rear of washer while in use. I removed the back cover. It appears that there were 2 small clear water/tube lines that come out from the back of the tub - lower/middle area. One of the tubes is still attached (this tube travels up to the upper portion of the back of the unit), however the other tube is missing - appears to have broken off. Water is flowing out of this hole when the water turns on. I can not locate the other tube if there was one and cannot find where this tube may go. Any help would be appreciated.
For model number WT1201CW
PartSelect logo
Hi Mike, Thank you for the question. There is one tube that would lead up to the water lever/pressure switch and another tube that leads to the dispenser at the corner of the tub. Hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3527446
Manufacturer Part Number: 5221EA1008F
Brand
Model Number
Description
LG
048231013369
Washer Dryer Combo - Washer-Dryer
LG
048231013635
Washer Dryer Combo - Washer-Dryer
LG
29002
Washer Dryer Combo - Washer-Dryer
LG
29272
Washer - LG Washing Machine Model 29272 Parts
LG
29278
Washer - LG Washing Machine Model 29278 Parts
LG
29472
Washer - LG Washing Machine Model 29472 Parts
LG
29478
Washer - LG Washing Machine Model 29478 Parts
LG
31402
Washer - LG Washing Machine Model 31402 Parts
LG
31412
Washer Dryer Combo - Washer-Dryer
LG
31422
Washer - LG Washing Machine Model 31422 Parts
LG
31423
Washer - LG Washing Machine Model 31423 Parts
LG
31462
Washer - LG Washing Machine Model 31462 Parts
LG
31463
Washer - LG Washing Machine Model 31463 Parts
LG
31513
Washer - LG Washing Machine Model 31513 Parts
LG
31522
Washer - LG Washing Machine Model 31522 Parts
LG
31523
Washer - LG Washing Machine Model 31523 Parts
LG
31553
Washer - LG Washing Machine Model 31553 Parts
LG
31622
Washer - LG Washing Machine Model 31622 Parts
LG
31623
Washer - LG Washing Machine Model 31623 Parts
LG
35452
Washer Dryer Combo - Washer-Dryer
LG
793396
Washer Dryer Combo - Washer-Dryer
Kenmore
79629002000
Washer
Kenmore
79629002010
Washer
Kenmore
79629272000
Washer
Kenmore
79629272010
Washer
Kenmore
79629272900
Washer
Kenmore
79629278000
Washer
Kenmore
79629278010
Washer
Kenmore
79629278900
Washer
Kenmore
79629472000
Washer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service